···
Log in / Register

Where to Renew Driver's License in Keqiao?

4 Answers
Diane
07/29/25 10:02pm

Renewing a driver's license in Keqiao is done at the Keqiao District Vehicle Management Office, located 150 meters south of the intersection of Diyang Road and Qiantao Highway in Keqiao District, Shaoxing City, Zhejiang Province. Relevant information about driver's licenses is as follows: Definition of Driver's License: A motor vehicle driver's license is a legal document issued by the administrative authorities to individuals who have legally learned to drive, mastered traffic regulations and driving skills, and passed the required tests, permitting them to operate certain types of motor vehicles. License as a Permit: Driving a motor vehicle requires certain driving skills. Without these skills, driving a motor vehicle arbitrarily may lead to traffic accidents. Generally, individuals cannot drive on the road without a license. However, for those who have acquired safe driving skills, the document that permits them to drive vehicles on the road is called a 'driver's license,' indicating that it serves as a 'permit.'

Was this review help?
16
5
Share
RafaelLynn
08/15/25 10:02pm

I remember last time when I renewed my driver's license in Keqiao, I went directly to the Vehicle Management Office of Keqiao Branch under Shaoxing Public Security Bureau, near the intersection of Jinke Bridge Avenue, with a café across the street offering a refreshing atmosphere. It took me ten minutes to drive there from home, and there were plenty of parking spots available, so no need to worry much about parking difficulties. Before renewing, it's best to bring the original ID card, a few white-background photos, and a medical examination report—the hospital is also conveniently close by. The whole process took about an hour, including queuing and data entry, with the staff being quite patient and helping me get it done quickly. Booking an appointment in advance via the 'Traffic Management 12123' app can reduce waiting time, especially in the morning when it's less crowded. Regular license renewal makes me feel much safer about driving, as an expired license could affect insurance and risk fines. It's advisable to check the opening hours; weekdays before noon are less busy, avoiding peak hours when it gets packed.

Was this review help?
7
3
Share
Expand All
SanRylee
10/17/25 7:21am

When it comes to the location for renewing a driver's license in Keqiao, the Vehicle Management Office of the Keqiao District Traffic Police Brigade on Jinke Bridge Avenue is the most convenient. I searched for the location on Gaode Maps and rode a shared bike there directly. If you use mobile apps like 'Traffic Management 12123,' you can directly check the address and make online appointments, saving you the hassle of queuing. Last time, after making an appointment through the app, I just brought my ID card and a one-inch photo, and the front desk service was quite efficient—it took less than twenty minutes to finish. There are snack shops nearby, so you can grab a milk tea while waiting. A medical check-up is required for the renewal, and I happened to get a quick check-up at the community health center. Overall, using technology to reduce legwork has made things much easier for me. A friendly reminder: regularly check the validity of your documents to avoid penalties. Nowadays, young people prefer convenience, and this method is really practical.

Was this review help?
4
4
Share
Expand All
Rosalie
11/30/25 8:05am

The place where I renewed my driver's license in Keqiao is the Vehicle Management Office of the Keqiao District Traffic Police Brigade, located on Jinkeqiao Avenue. It's quite easy to find, with a bus stop nearby, making it convenient for elderly people like me who take public transportation. The process is straightforward—just bring your ID card and photos, queue up, fill out the forms, and that's it, no unnecessary hassle. The staff were friendly and patient in guiding me through the process. After renewing my license, I feel much more at ease driving out. I recommend going on a weekday when it's less crowded, so you don't have to rush.

Was this review help?
1
5
Share
Expand All
More Forum Discussions

Why can't the tricycle shift gears?

It may be due to slippage in the hydraulic-operated clutch. Below is relevant information about vehicle gear shifting: Precautions: When downshifting, use the method of double-clutching with a blip of the throttle. The principle of downshifting with a throttle blip is: the faster the speed, the larger the "throttle blip"; the slower the speed, the smaller the "throttle blip"; at low engine speeds, the "throttle blip" should be larger; at high engine speeds, the "throttle blip" should be smaller; on flat roads, the "throttle blip" should be larger; when going uphill, the "throttle blip" should be smaller. Techniques: Gear shifting should be timely, accurate, smooth, and swift. When starting the vehicle, generally use the low gear (first gear). After starting, as long as road conditions permit, quickly and promptly shift up to higher gears.
11
3
Share

Should You Turn Off the Air Conditioner When Exiting the Car?

When the car's air conditioner is not in use, whether you are exiting the vehicle or remaining inside, it is essential to turn it off promptly. Below is an introduction to automotive air conditioning systems: Air Conditioning Layout: Different types of air conditioning systems have varying layouts. Currently, most passenger cars widely adopt integrated heating and cooling air conditioning systems. The layout typically involves assembling components such as the evaporator, heater core, centrifugal blower, and control mechanisms into a single unit, referred to as the air conditioning assembly. Air Conditioning Components: Modern air conditioning systems consist of a refrigeration system, heating system, ventilation and air purification devices, and a control system. Automotive air conditioning systems generally include components such as the compressor, electronically controlled clutch, condenser, evaporator, expansion valve, receiver-drier, piping, condenser fan, vacuum solenoid valve, idle speed controller, and control system. The automotive air conditioning system is divided into high-pressure and low-pressure lines. The high-pressure side includes the compressor output side, high-pressure lines, condenser, receiver-drier, and liquid lines; the low-pressure side includes the evaporator, accumulator, suction lines, compressor input side, and compressor oil sump.
19
0
Share

Is it considered overloading for an SUV to carry 6 people?

No, it is considered overloading. Below is relevant information about overloading: Hazards: Research has found that when a vehicle's axle load exceeds the standard load by one time, driving on the highway once is equivalent to a standard vehicle driving on asphalt pavement 256 times or on cement concrete pavement 65,536 times. Moreover, the larger the vehicle's approved load capacity, the more severe the damage to the road caused by overloading. The maximum single rear axle load monitored in China reached 24 tons. One trip by such a vehicle on a cement highway is equivalent to 1.21 million trips by a standard vehicle. Negative impacts: Overloading has caused significant harm to the healthy development of the transportation market. Overloading leads to market chaos, completely disrupting the basic pricing system of the transportation market. Under normal circumstances, transportation pricing is based on the cubic meters and weight of the cargo. Overloaded vehicles severely pollute the atmospheric environment. To obtain greater traction power, overloaded vehicles often drive at low gears with high throttle, causing incomplete combustion of engine fuel, resulting in excessive exhaust emissions, excessive noise, and severe pollution of the atmospheric environment.
14
2
Share

What is the appropriate tire pressure for uy125?

The recommended tire pressure for the front wheel of uy125 is 1.8-2.5 bar, and for the rear wheel is 2.8-3.2 bar. Hazards of low tire pressure: Increased friction coefficient with the road surface, leading to higher fuel consumption; Causes heavy steering and easy deviation, which are factors detrimental to driving safety; Increases the movement of various parts of the tire, causing abnormal heating due to excessive rolling; Reduces the functionality of the cord and rubber, leading to delamination or cord breakage, and excessive friction with the rim causing damage to the bead area and abnormal wear. Hazards of high tire pressure: Accelerates localized wear of the central tread pattern, reducing tire lifespan; Increases vehicle vibration, indirectly affecting the lifespan of other components; Causes excessive stretching and deformation of the tire cord, reducing tire elasticity and increasing the load on the vehicle during driving; Decreases puncture resistance. When encountering sharp objects such as nails or glass on the road, they can easily penetrate the tire, and impacts can cause internal cracks and blowouts, leading to tire bursts.
4
2
Share

Where is the charging port of a tricycle located?

Electric tricycles generally have their charging ports around the seat box or on the left or right side of the front part under the cargo bed. Below is relevant information about electric vehicle charging: Precautions: If the charger gets wet, it can easily burn out the circuit board and control components, and human contact may cause irreversible harm. Additionally, water in the charger can lead to electronic component failures. If the charger remains in operation, it may overcharge the battery, causing damage. Charging Instructions: Charge according to the battery capacity, typically taking 8-10 hours to fully charge. Disconnect the power promptly after full charge. Prolonged power connection may cause overheating of electronic components inside the charger, leading to short circuits and sparks, which can trigger a fire. Fires are most likely to occur at night and early morning, so it's best to charge during the day under supervision. Once the indicator light on the charger turns green, unplug it as soon as possible. Ensure the charging environment is well-ventilated, with an optimal temperature of 25°C. Avoid exposing the vehicle to direct sunlight or rain during storage.
19
3
Share

What is the standard size for forklift forks?

Taking 3-3.5 ton forklifts as an example: the main sizes are 1.07 meters, 1.22 meters, 1.37 meters, 1.52 meters, 1.67 meters, 1.82 meters, 1.97 meters, etc. The same applies to 5-10 ton forklifts, generally increasing by 150mm per size. Below is relevant information: Forklift technical parameters: Rated load capacity: The rated load capacity of a forklift refers to the maximum weight of goods allowed to be lifted when the distance from the center of gravity of the goods to the front wall of the fork is not greater than the load center distance, expressed in T (tons). When the center of gravity of the goods on the fork exceeds the specified load center distance, the load capacity should be reduced accordingly due to the limitations of the forklift's longitudinal stability. Load center distance: The load center distance refers to the horizontal distance T from the center of gravity of standard goods placed on the fork to the front wall of the vertical section of the fork, expressed in mm (millimeters). For 1T to 4T forklifts, the specified load center distance is 500mm.
6
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.