Where to Renew Driver's License in Huzhou?

2 Answers
VanGarrett
07/29/25 3:12am
Huzhou driver's license renewal can be done at the Huzhou Vehicle Management Office, or at any other Vehicle Management Office. Below is the relevant information for driver's license renewal: 1. Online Processing Time Limit: You can apply for license renewal through the Traffic Management 12123 app within 90 days before the license expires and up to 11 months after expiration. Once the online renewal application is submitted, the application cannot be withdrawn. If the user refuses to accept the license or fails to pick it up at the designated location within one month, the user will not be allowed to handle online vehicle and driver's license related services. 2. Photo Requirements: The driver's license photo must have a white background and be a color photo without a hat (those who need vision correction must wear glasses). Real-time shooting is recommended to improve the usability of the photo.
Was this review help?
11
1
Share
DiJonathan
08/12/25 7:04am
I just renewed my driver's license in Huzhou at the Vehicle Management Office of Huzhou Public Security Bureau Traffic Police Detachment, located on Changtianyang Road in Wuxing District. Parking nearby was quite convenient. I made an appointment in advance through the 'Huzhou Traffic Police' WeChat official account to avoid wasting time in queues. The documents required were minimal: ID card, old driver's license, and a health certificate obtained from a designated hospital after a medical check-up. The entire process took about two to three hours, costing less than 40 yuan, including photo-taking and license processing. If your driver's license is about to expire, it's best to act one month in advance. Forgetting to renew it while driving can be troublesome, affecting daily commutes and increasing risks. Huzhou has branches in various districts and counties, such as the Vehicle Management Office in Anji, allowing you to choose the nearest location.
Was this review help?
4
4
Share
Expand All
More Forum Discussions

Is the red terminal on a car battery the positive or negative pole?

In car batteries, the red terminal is the positive pole, and the black terminal is the negative pole. The method for jump-starting a car battery is as follows: 1. Prepare two jumper cables; 2. Find a vehicle that can operate normally; 3. Position the two vehicles facing each other; 4. Connect the jumper cables to the batteries, positive to positive and negative to negative; 5. Start the functioning vehicle first, then start the vehicle receiving the jump-start. Once started, disconnect the cables. Car battery maintenance methods: 1. Regularly inspect the battery; 2. Avoid excessively long charging times; 3. Gently press the brake when starting; 4. Ensure the battery is fully charged if the vehicle will be parked for an extended period; 5. Protect the battery from extreme heat or cold.
19
4
Share

What are the steps for replacing the transmission fluid in a Cadillac CT6?

Cadillac CT6 transmission fluid replacement uses the circulation machine method. The circulation method is more thorough but consumes more transmission fluid compared to the gravity method. The circulation machine method involves adding new transmission fluid into the machine, connecting the transmission and the circulation machine via pipe interfaces, and using hydraulic pressure to push out the old fluid with the new fluid. This method cleans the fluid passages more thoroughly. More details are as follows: 1. Currently, there are three mainstream methods for replacing automatic transmission fluid. The first is similar to changing engine oil, where the transmission drain plug is loosened to drain and refill the fluid. The second involves directly removing the oil pan to drain and refill the fluid. The third is the more advanced circulation machine method for replacing automatic transmission fluid. 2. The traditional gravity drain method cannot 'completely' replace the transmission fluid, while the circulation machine method effectively addresses this shortcoming. The traditional gravity method, which involves manually draining the fluid by loosening the drain plug at the bottom of the transmission or removing the transmission oil pan, can only replace about half of the old fluid. This not only fails to replace the fluid thoroughly but also easily contaminates the new fluid. 3. The circulation machine method uses specialized equipment to generate pressure and dynamically replace the fluid in the transmission's lubrication and cooling lines. This process takes longer but has the advantage of being more thorough, removing over 95% of the old fluid and cleaning out sludge and metal particles from the automatic transmission. With this method, the fluid replacement interval can be extended up to 60,000 kilometers.
10
4
Share

How to Maintain 30 cm from the Side Line During Parallel Parking?

Here are the steps for maintaining a 30 cm distance from the side line during parallel parking: 1. Keep the right wheel 30 cm from line AC, move forward until the rear of the car passes point A, then stop. 2. Turn on the right signal. Shift into reverse gear, look at the right rearview mirror, and when point A disappears from the mirror, turn the steering wheel fully to the right and continue reversing. 3. Look at the left rearview mirror, and when point E appears, quickly turn the steering wheel fully to the left to enter the parking space. Stop when the car is aligned. Here are some driving test tips: 1. Red indicates prohibition, yellow indicates warning, blue indicates instruction, and absence of these colors indicates auxiliary. 2. Prohibition matches prohibition, warning matches warning, instruction matches instruction—same is correct, different is wrong. 3. There's only a one-word difference between "yellow light on" and "yellow light flashing." "Flashing" ensures safety; "on" prohibits passage, but vehicles that have already crossed the line may proceed. 4. For questions about high beams and low beams, only low beams are allowed; high beams are prohibited.
10
2
Share

How often should the water in the Sylphy's radiator be refilled?

The water in the Sylphy's radiator generally needs to be replaced every 2 years. The car radiator, usually referring to the car's cooling system radiator, consists of three parts: the inlet chamber, outlet chamber, main plate, and radiator core. Here are the steps to refill the car radiator: 1. Turn the pressure cap counterclockwise. If you hear a sound, wait until it stops before opening. 2. Fill the coolant expansion tank with an appropriate amount of coolant until the level is between the MAX and MIN marks. 3. Start the engine with the coolant expansion tank cap open. 4. After starting the engine, the coolant level in the tank will gradually decrease. At this point, add more coolant to the expansion tank until the level is again between the MAX and MIN marks. 5. Reinstall the cap, ensuring it is hand-tightened and fully seated.
6
1
Share

Fuel consumption per 100 kilometers for the 1.8T Magotan?

According to the comprehensive fuel consumption data from the Ministry of Industry and Information Technology, the 1.8T Magotan consumes 6.4 liters per 100 kilometers. Based on actual measurements from some Magotan owners, the fuel consumption is generally around 7.2L/100km. Depending on road conditions and driving habits, the fuel consumption of the 1.8T Magotan may vary. Below are some tips related to fuel consumption for the Volkswagen Magotan: 1. Avoid sudden acceleration and braking; develop good driving habits. A fuel-efficient method is to gently press the accelerator, allowing the car to start slowly. 2. Maintain an economical speed. Within this speed range, the car consumes the least fuel. 3. Reduce the load in the car. A higher load increases fuel consumption. 4. During the vehicle's break-in period, ensure thorough running-in. The break-in period directly affects fuel consumption and the overall condition of the car. 5. Warm up the car sufficiently before driving in winter. The idling time during warm-up should not exceed one minute. The main warm-up occurs during slow driving after starting. Only when the engine coolant reaches normal temperature should you drive according to your usual habits.
7
0
Share

How Long Before a Novice Driver Can Drive on the Highway?

Novice drivers can drive on the highway as soon as they obtain their driver's license, but they must be accompanied by an experienced driver with over three years of driving experience. Without such accompaniment, they must wait until they have held their license for at least one year. Vehicles on highways move faster and are more numerous, making it dangerous for those without prior highway driving experience. The restrictions for driving during the probationary period are as follows: 1. A probationary driver operating a motor vehicle on the highway must be accompanied by a driver who holds a corresponding or higher-class driver's license with at least three years of experience; 2. During the probationary period, drivers are prohibited from operating buses, commercial passenger vehicles, police cars, fire trucks, ambulances, engineering rescue vehicles, or any motor vehicle carrying explosives, flammable and explosive chemicals, highly toxic substances, radioactive materials, or other hazardous items.
19
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.