Where to Renew an Expiring Driver's License?

How to Drive a Motor Vehicle on Mountainous Uphill Sections?

Specific methods for driving a motor vehicle on mountainous uphill sections: 1. When driving uphill, maintain sufficient engine power to ensure the vehicle climbs smoothly. Continuously monitor the coolant temperature gauge to prevent the engine from overheating. If the coolant boils, choose a suitable location to stop, rest briefly, add coolant, inspect the vehicle, and continue driving only after the temperature has decreased. 2. When driving on steep slopes, always select the appropriate gear based on the slope conditions. If the engine lacks power, quickly downshift to avoid straining the engine, which could lead to stalling. If you miss the optimal shifting moment, you may skip gears when downshifting. If you cannot engage a gear or the engine stalls, immediately use both the service brake and parking brake to stop the vehicle forcefully, then restart the engine.

5

0

Share

What does HDC displayed on the car mean?

HDC on the vehicle stands for Hill Descent Control system, which enables automatic braking when the car is descending steep slopes. Here are the precautions for using the HDC system: 1. The HDC system must be set up before use to ensure the driver focuses on driving. After setting up the HDC system, the driver should release all pedals to avoid interfering with the HDC system's operation. 2. When using the HDC system to descend a slope, the driver does not need to press any pedals, and the vehicle will drive autonomously at a speed of around 8 km/h. During autonomous driving, the driver only needs to steer the wheel. 3. If the HDC system detects a fault, the car's computer display will show the message "HDC-FAULT-SYSTEM-NOT-AVAILABLE". In this case, the use of the HDC system should be stopped, and the vehicle should be operated manually. 4. HDC is an auxiliary system. Do not rely entirely on the HDC system for descending slopes to avoid unexpected situations.

17

1

Share

What happens if a truck does not use urea?

When a truck does not add urea, the nitrogen oxides in the exhaust cannot undergo catalytic reduction, and the released exhaust will have a negative impact on the ecological environment. Below is a detailed introduction to the use of urea in trucks: 1. The primary purpose of using urea in vehicles is to reduce harmful nitrogen oxides in the exhaust into nitrogen and water. 2. The main harmful substances in truck exhaust are nitrogen oxides and particulate matter. While particulate emissions can be reduced through technological means inside the engine, nitrogen oxides remain the primary component of the exhaust. By injecting urea into the exhaust after-treatment device, the urea decomposes into ammonia at high temperatures. Under the action of a catalyst, the ammonia reacts with nitrogen oxides to produce harmless nitrogen and water. This device is called the SCR (Selective Catalytic Reduction) after-treatment system. 3. Trucks have a dedicated urea tank, and urea is consumed as long as the vehicle is running. Therefore, it is necessary to replenish urea in a timely manner. Generally, about 4 liters of urea are consumed per 100 liters of diesel. The exact consumption depends on factors such as engine displacement, model, manufacturer, etc. Different road conditions and varying loads can also affect urea consumption.

11

1

Share

What is the battery model for Geely Emgrand GS car key?

Geely Emgrand GS car key uses CR2032 battery. CR2032 is a lithium manganese dioxide battery, named according to IEC standards. The naming convention is as follows: C- indicates a chemical battery system with lithium metal as the negative electrode and manganese dioxide as the positive electrode; R- indicates the battery shape is cylindrical (if square, F is used instead); 20 indicates the battery diameter is 20mm; 32 indicates the battery height is 3.2mm. The nominal voltage is 3.0V, endpoint voltage is 2.0V, and rated capacity ranges from 200-240mAh depending on manufacturer quality. Under normal conditions, CR2032 batteries have a shelf life of 5 years. Poor manufacturing or quality control may significantly shorten this lifespan. Domestic first-tier brands can generally guarantee this lifespan. In ideal environments (sealed, room temperature, no moisture interference), the lifespan may extend to 8 or even 10 years. Generally, replacing a car key battery only requires 3 steps: Step 1: Remove the mechanical key. Press the lock button on the side of the smart key to release the mechanical key. Step 2: Open the battery cover. After removing the mechanical key, you'll see two slots at the top of the smart key - a deep slot (keyhole) and a shallow slot (for opening the battery cover). Insert the mechanical key into the shallow slot and pry open the battery cover. The coin battery can then be easily removed. Step 3: Replace the battery. Install the new battery, then reassemble the battery cover and mechanical key to complete the replacement.

5

3

Share

How to Adjust the Rearview Mirror Angle?

Here are the specific methods for adjusting the rearview mirror angle: 1. When you need to adjust the rearview mirror angle, you can use the electric buttons inside the car. These buttons are located on the left side of the steering wheel and can adjust the left and right rearview mirrors. 2. Adjust the center rearview mirror. Adjust the left and right positions so that the left edge of the mirror just cuts to the right ear in the mirror image, and the up and down positions place the distant horizon in the center of the mirror. Key points for adjusting the center rearview mirror: horizontally align the middle, place the ear on the left. Position the distant horizon along the midline of the center rearview mirror, then move left and right to place the right ear image just at the left edge of the mirror. 3. Adjust the left rearview mirror. For the up and down positions, place the distant horizon in the center, and adjust the left and right positions so that the car body occupies 1/4 of the mirror's range. Key points for adjusting the left rearview mirror: place the horizon at the midline of the rearview mirror, then adjust the car body's edge to occupy 1/4 of the mirror image. 4. Adjust the right rearview mirror. Since the driver's seat is on the left, it's not as easy for the driver to grasp the situation on the right side of the car. Additionally, due to the need for roadside parking sometimes, the right rearview mirror should leave a larger ground area when adjusting the up and down positions, about 2/3 of the mirror. As for the left and right positions, adjust so that the car body occupies 1/4 of the mirror area. Key points for adjusting the right rearview mirror: place the horizon at the 2/3 position of the rearview mirror, then adjust the car body's edge to occupy 1/4 of the mirror image.

9

1

Share

Is it necessary to install window rain deflectors on a car?

It is necessary to install window rain deflectors on a car. Here are the steps for installing rearview mirror rain deflectors: 1. First, clean the area where the rearview mirror rain deflector will be installed to ensure there are no debris that might prevent proper adhesion. 2. Then, compare the position of the rain deflector with the rearview mirror to check if the size is correct. 3. Once confirmed, peel off the 3M adhesive backing on the rain deflector and attach it carefully, ensuring there are no air bubbles. 4. Finally, press the rain deflector firmly back and forth with your hand to ensure it is securely fixed. You can also use a hairdryer to heat the adhesive for better bonding strength.

14

1

Share

Where to Renew an Expiring Driver's License?

How to Drive a Motor Vehicle on Mountainous Uphill Sections?

What does HDC displayed on the car mean?

What happens if a truck does not use urea?

What is the battery model for Geely Emgrand GS car key?

How to Adjust the Rearview Mirror Angle?

Is it necessary to install window rain deflectors on a car?

When Does the Fan Behind the Car Radiator Start Running?

Is Land Rover produced domestically in China?

When to Use the M Gear?

Can LED headlights pass the annual inspection?