Where to Renew a Driver's License in Baoding?

1 Answers
DiHolden
07/25/25 9:23pm
Baoding driver's license renewal can be processed at the Baoding Public Security Bureau Vehicle Management Office, located on National Highway 107. Alternatively, you can go to the Baoding Public Security Bureau Traffic Police Detachment Vehicle Management Office at 2601 North Great Wall Street. Choose whichever location is more convenient for you. Below are some important notes for license renewal: 1. Expired for less than one year: You can renew your license normally if it's been expired for less than a year. 2. Expired for one to three years: If your license has been expired for more than one year but less than three years, it will be canceled, but you can renew it by passing the subject one test. 3. Expired for more than three years: Licenses expired for more than three years will be invalid and cannot be renewed.
Was this review help?
17
4
Share
More Forum Discussions

How to Solve Fogging on the Outside of Car Windows on Rainy Days?

Methods to deal with fogging on the rear glass after rain include using air conditioning for defogging, opening windows for convection defogging, anti-fog spray, anti-fog cloth, and detergent-based defogging. Specific introductions are as follows: Air Conditioning for Defogging: There are two main reasons for fogging on car windows: low temperature and high air humidity. Air conditioning can be used to remove fog from the front windshield, but if the humidity inside the car is too high, the effect may not be very noticeable. Slightly opening the windows can quickly reduce the humidity inside the car. Opening Windows for Convection Defogging: Opening windows allows cold and hot air to circulate. If the fog is not too heavy, you can open a small gap in the side windows to allow air convection inside the car. The temperature inside will gradually approach the outside temperature, and the fog will dissipate. The advantage is that it achieves the effect of turning on the air conditioning without increasing fuel consumption. During extreme cold or rainy weather, it is recommended to intermittently open and close the windows. This method is not suitable when the fogging is very severe. Anti-Fog Spray: Using glass anti-fog spray can form a transparent hydrophobic ion film on the glass surface, preventing water droplets and fog from condensing. Anti-Fog Cloth: When fogging occurs, wiping with an anti-fog cloth will prevent further fogging. The effect of an anti-fog cloth is the same as that of an anti-fog spray. Detergent-Based Defogging: Mix dishwashing liquid with water in a ratio of approximately 1:10. Then, use absorbent cotton or a clean, soft cloth to apply it to the inside of the front and rear windshields. Alternatively, you can mix household shampoo or shower gel with water in a ratio of about 1:10, pour it into a spray bottle, and spray it on the glass before driving to prevent fogging.
4
5
Share

What does the Volkswagen Magotan 2699 dual warranty include?

It includes 5 basic maintenance services (including the first maintenance), and the manufacturer's warranty is extended from 3 years or 100,000 kilometers to 5 years or 150,000 kilometers. Here is an introduction to the Magotan: Engine: The 1.8TSI engine equipped in the Magotan is the latest generation engine from Volkswagen Germany, incorporating the most advanced engine technology internationally and leading the development trend of gasoline engines. Exterior design: The resolute V-shaped front grille exudes a robust and elegant appearance, while the dynamic and stylish streamlined body lines give the Magotan an impressively low drag coefficient of 0.28. The latest design concept is represented by the 'compound fisheye' adaptive turning bi-xenon headlights, showcasing an aura of intelligence and composure. The refined and minimalist LED taillight design embodies the fusion of technology and art. The side profile maintains the classic 'diamond proportion.'
8
3
Share

What is the wading depth of Audi vehicles?

Audi vehicles have different wading depths depending on the model. Sedans typically have a wading depth of 20-30 cm, SUVs 30-60 cm, and hardcore off-road vehicles can reach 70-100 cm. Generally, as long as the water level does not exceed the height of the engine intake, there shouldn't be significant issues. Problems that may occur after wading: Crank connecting rod deformation and damage: When a mixture of water and air enters the engine through the intake, the connecting rod may deform due to water, as gases are compressible but liquids are not. If the driver attempts to start the car at this point, the immense counterforce can cause the bent connecting rod to rub against the cylinder, leading to irreversible damage. Interior mold and odor: If water enters the cabin, improperly treated carpets and upholstery may develop mold and unpleasant odors. Transmission rust: Water mixing with transmission oil can accelerate wear and, in severe cases, cause extensive rusting of the transmission.
5
0
Share

Will Frequently Running a Naturally Aspirated Engine at 3000 RPM Damage the Vehicle?

Running a naturally aspirated engine frequently at 3000 RPM is considered a moderate speed. As long as regular maintenance is performed, it will not cause any damage to the engine. Overview of Naturally Aspirated Engines: Naturally aspirated (English: Normally-Aspirated) is a type of car intake system where air is drawn into the combustion chamber by atmospheric pressure without the use of any supercharger. Modern engines can be divided into naturally aspirated and supercharged types, with the latter further categorized into mechanical supercharging, turbocharging, and the latest pressure wave supercharging. Advantages of Naturally Aspirated Engines: Naturally aspirated engines offer superior smoothness in power output and direct responsiveness compared to supercharged engines, such as the V8 2.4L F1 engine. Principle of Engine RPM: There is a crankshaft speed sensor on the engine, which generates pulse signals as the engine crankshaft rotates (some gasoline engines may use ignition pulse signals). This signal is transmitted to the engine computer, which calculates and outputs a control signal to the tachometer, driving the stepper motor (the pointer is directly mounted on the stepper motor's rotating shaft). The faster the engine speed, the more pulses are generated, and the higher the RPM value displayed on the tachometer.
2
1
Share

What is the mileage for the first maintenance of a motorcycle?

Within 300 kilometers. Below is a detailed introduction to motorcycle maintenance: 1. Specific maintenance mileage: The break-in period for a new motorcycle is typically between 1500 to 3000 kilometers. A complete break-in period should be 3000KM, but within the first 1500KM, the speed should not exceed 30KM, and it is advisable to avoid carrying passengers. The break-in period for major repairs such as cylinder replacement or piston ring replacement is the same as that for a new motorcycle. Ensuring that the first 1000 kilometers of maintenance items are properly completed will guarantee the motorcycle's optimal performance and extend its service life. 2. Oil change standards: The standard for selecting engine oil for motorcycles is to choose SG15W40 in summer and SG10W30 in winter. If conditions permit, higher-grade lubricants can be selected. However, the minimum should not be lower than SF-grade lubricants. Large-displacement motorcycles are best suited for fully synthetic oil. Currently, motorcycle oils are classified from SA to SJ grades.
6
3
Share

What does acceleration g-value mean?

It refers to the acceleration generated during vehicle movement, including lateral acceleration (lateral g-value) and longitudinal acceleration (longitudinal g-value). 1G equals 10m/s², meaning the vehicle can accelerate to 10 meters per second in one second, equivalent to 36 kilometers per hour. In automotive acceleration performance testing, the average acceleration measured within a certain acceleration range divided by the gravitational acceleration G yields the average acceleration g-value. Below are extended details: 1. Vehicle acceleration time: Also known as the vehicle's acceleration capability, it refers to the ability of a vehicle to rapidly increase its speed under various operating conditions. There are generally two representation methods: one is the standing start acceleration time (0-100 km/h acceleration time), and the other is the overtaking acceleration time, which reflects the vehicle's overtaking capability. 2. Acceleration capability: Vehicles exhibit stronger acceleration capability in lower gears. Therefore, when testing the 0-100 km/h acceleration time, vehicles typically start in first gear with the throttle fully depressed, shifting to second gear only when the engine speed reaches the redline zone. Most vehicle models can achieve 0-100 km/h acceleration in second gear; if not, shifting to third gear is required. During overtaking, to achieve better acceleration capability, it is generally necessary to downshift by one gear, such as from fifth to fourth gear, before accelerating to overtake.
8
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.