···
Log in / Register

Where to Process the Transfer of a Used Car?

1 Answers
McIsabelle
08/28/25 8:17am
To transfer the ownership of a used car, you need to go to the nearest local vehicle management office or used car trading market. Below are the relevant procedures for the transfer: 1. For the seller: ID card of the owner, vehicle registration certificate, vehicle license, original purchase invoice (or transfer invoice if the car has been transferred before). If the seller is an organization, the original organization code certificate and official seal are required. 2. For the buyer: ID card, and a valid temporary residence permit is needed for non-locals to get a local license plate. If the buyer is an organization, the original organization code certificate and official seal are required. Original vehicle purchase invoice or the last transfer invoice (required before 2012, not needed in most cities after 2012). Original vehicle license. Vehicle registration certificate (big green book). For relocation, the small book of purchase tax is needed (small red book before 2001, small green book after 2001). (Required before 2012, not needed in most cities after 2012, unless in autonomous regions, where it may vary.) Bring all the above documents to the used car transfer hall for processing. Both parties: Sign the used car sales contract and bring all the above documents to the used car transfer hall for processing.
Was this review help?
5
5
Share
More Forum Discussions

How to turn off the rear wiper of Mercedes-Benz GLB?

Mercedes-Benz GLB rear wiper is turned off by the knob at the top of the light control lever. Here are the relevant introductions: 1. Mercedes-Benz GLB rear wiper: The Mercedes-Benz GLB rear wiper is on a control lever, mostly located in the right area of the front wiper button. The general symbol is a rectangular frame with a 30-degree inclined line inside. Press the corresponding button to turn it on. 2. Front wiper: The front wiper generally has five modes: wiper off, low-frequency intermittent wipe, high-frequency intermittent wipe, continuous low-speed wipe, and continuous high-speed wipe, while the rear wiper only has on and off modes.
7
0
Share

Why is Carbon Black the Most Popular Color for BMW?

Carbon black has advantages in terms of paint texture, luminosity, and transparency. The differences between Carbon Black and Black Sapphire: 1. Texture: BMW's Carbon Black is actually a deep blue color. Although it appears black from a distance, a closer look reveals a more prominent deep blue hue, while Black Sapphire is pure black. The black paint on BMWs is typically a standard paint, whereas Carbon Black is a metallic paint. The gloss of Carbon Black paint is relatively higher than that of black, but it is also more expensive. 2. Luminosity and Transparency: Under the refraction of natural light, Carbon Black exhibits a subtle blue sheen, whereas black only shows a dark black hue. Due to black's light-absorbing properties, it rarely reflects light. In terms of transparency, Carbon Black is relatively more transparent and gives a sense of depth, while black's spatial effect is not as pronounced.
17
3
Share

Can a Lost Car Remote Be Replaced?

Yes, a lost car remote can be replaced with a new one. Here is an introduction to car remote keys: 1. Introduction to Car Remote Keys: A car remote key utilizes the wireless remote control function of the central locking system. It allows you to remotely unlock and lock the car doors without inserting the key into the lock. 2. How Car Remote Keys Work: The key emits radio waves, which are received by the car's antenna. The electronic control unit then identifies the signal code, and the system's actuator performs the unlocking or locking action. 3. Basic Components: (1) Transmitter: Consists of a transmission switch, transmission antenna, integrated circuit, etc. (2) Receiver: The signal is received via the car's shortwave antenna and processed by the distributor into the receiver's electronic control unit. The shortwave high-frequency amplification processor demodulates the signal, compares it with the demodulator's identification code, and executes the command.
4
4
Share

Should Uphill or Downhill Traffic Yield on Slopes?

According to Article 48, Paragraph 3 of the Implementation Regulations of the Road Traffic Safety Law of the People's Republic of China, the following provisions are introduced: 1. Provision One: On narrow slopes, the vehicle going uphill has the right of way. However, if the downhill vehicle has already entered the slope while the uphill vehicle hasn't started ascending, the uphill vehicle should yield to the downhill vehicle. 2. Provision Two: Considering that vehicles going uphill are prone to stalling, which may lead to traffic accidents. Precautions for downhill driving are as follows: 1. Precaution One: Use low gears like first or second gear when going uphill, rather than flooring the accelerator. 2. Precaution Two: Avoid sudden steering on downhill sections, as the high inertia and speed combined with improper steering can easily cause rollovers. 3. Precaution Three: When encountering short and gentle uphill slopes, observe the slope and traffic conditions. If the road is wide and flat with no hazards on either side, you can shift to a lower gear about 100m in advance and accelerate to climb the slope. 4. Precaution Four: If there is another uphill slope after a downhill section, prepare to climb the next slope as you approach the bottom by releasing the brake pedal in time and shifting to a higher gear appropriately. 5. Precaution Five: When going uphill, maintain a safe distance of at least 30m between your vehicle and the one in front to prevent collisions in case of rollback. 6. Precaution Six: On narrow slopes, if there is a vehicle coming downhill ahead, choose a safe spot to stop and wait for the downhill vehicle to pass before proceeding uphill.
16
5
Share

What is a car body composed of?

An automobile body consists of three main parts and related components: the front body, the middle body, and the rear body. Here are the details: 1. Front body: ① Front bumper. ② Front fender: Located at the lower side of the engine hood and above the front wheel, it is an important body decorative component, usually made of stamped thin steel plates. ③ Engine hood: Located at the upper front of the vehicle, it serves as the maintenance cover for the engine compartment. ④ Front bulkhead: Positioned at the front of the passenger compartment, it separates the engine compartment from the passenger compartment. ⑤ Front longitudinal beam: The main structural component of the front body, directly welded to the lower part of the body, with additional components like the wheel housing (sometimes integrated with the front longitudinal beam) welded onto it. 2. Middle body: ① Pillars, rocker panels, and floor. ② Roof: Refers to the cover at the top of the passenger compartment, which may include features like a sunroof, ventilation window, or antenna. The roof mainly consists of the roof panel, roof lining, and cross beams, with some models also equipped with roof racks. ③ Doors: Serve as entry and exit points for passengers, equipped with door locks, windows, window regulators, and other accessories. The door frame is the main steel structure, with hinges, windows, handles, etc., mounted on it. 3. Rear body: ① Trunk and trunk lid: The trunk is the space for loading items, formed by trunk components and body floor panels. ② Rear quarter panel: Refers to the body panel behind the rear door frame that covers the rear wheel and the side of the rear body. ③ Rear bumper: Located at the tail of the vehicle, it serves to decorate and protect the rear parts of the vehicle.
4
1
Share

Is Dry Ice Cleaning Necessary for Engine Carbon Deposits?

Dry ice cleaning for engine carbon deposits is a relatively safe cleaning technology that can be used when dealing with carbon buildup in vehicles. It primarily involves using an air compressor to spray dry ice particles onto the carbon deposits that need cleaning. Moreover, dry ice cleaning can thoroughly remove carbon deposits from the engine without causing damage or requiring engine disassembly. The principle of dry ice cleaning for engine carbon deposits is explained as follows: 1. Explanation One: It mainly utilizes the high-pressure gas from an air compressor as the carrier, with dry ice particles acting as the accelerating medium. 2. Explanation Two: The cleaning machine sprays the surface of the object to be cleaned, leveraging the sublimation and melting effects of momentum to remove dirt from the surface.
17
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.