Where to Press to Open the Rear Door from Inside?

2 Answers
GrantLynn
07/25/25 9:27am
To open the rear door from inside, press the lock release switch. Both drivers and passengers should master the correct door-opening methods: 1. Two-step opening method: When opening the door, only leave a small gap first, then turn your head to check the rear situation. After confirming it's safe, fully push the door open to exit. 2. Dutch reach method: Use the hand farthest from the door to open it, which naturally turns your upper body, making your head and shoulders face outward, allowing easier observation of the surroundings to prevent accidents. As a driver, if there are passengers in the vehicle, park 20-30 cm away from the curb and remind passengers to exit from the right side of the vehicle. If minors are seated in the rear, activate the child safety lock.
Was this review help?
5
1
Share
CamillaDella
08/11/25 7:19pm
Hey, I have to say this is quite common. Opening the rear car door is pretty straightforward—most vehicles have a handle on the inner side of the door, usually made of plastic or metal, and you just need to pull it to open. But sometimes you might find it stuck, which could mean the child safety lock is engaged. This small switch is tucked along the door edge—just slide it to turn it on or off. After years of driving, I’ve noticed that designs vary across models. For example, SUV door handles might be larger and easier to operate, while sedans may have smaller ones. The child lock is genuinely useful, especially if you have mischievous kids at home, as it prevents accidental door openings. I’d recommend new drivers take some time to check the vehicle manual for the exact location and avoid forcing the mechanism to prevent damage—safety first, after all. In short, before operating, make sure there’s no debris blocking the handle area, and just use a gentle motion.
Was this review help?
7
1
Share
Expand All
More Forum Discussions

Where is the air conditioning filter of the new BMW X1 located?

The air conditioning filter of the new BMW X1 is located on the side panel of the passenger seat, specifically on the side panel near the left foot of the passenger seat. Below is additional information about the air conditioning filter of the new BMW X1: Replacement method for the air conditioning filter of the new BMW X1: The glove box floor panel is secured by two nuts. Use an 8mm socket screwdriver to unscrew the nuts and remove the floor panel. Be careful not to use excessive force when removing the panel, and disconnect the wiring completely before fully removing the floor panel. After removing the floor panel, proceed to remove the side panel. Use a screwdriver to unscrew the screws. Note that there are three additional fixing clips inside the side panel. Once the side panel is removed, you can locate the air conditioning filter and its position. Open the latch to access the air conditioning filter box, then remove the cover to replace the air conditioning filter. Cleaning method for the air conditioning filter: If the filter is very dirty, use compressed air to clean it from the bottom up. Keep the air gun about 5cm (centimeters) away from the filter and blow at 500kPa (kilopascals) for approximately 2 minutes.
7
4
Share

Why does the traffic management system show I failed the Subject 3 test when I actually passed?

It could also be that the system has not uploaded or updated the results, so it is not displayed. Below is relevant information about the driving test Subject 3: 1. Introduction: Subject 3 includes the road driving skills test and the safe and civilized driving knowledge test. It is part of the motor vehicle driver's license assessment and is the abbreviation for the road driving skills and safe and civilized driving knowledge test in the motor vehicle driver's examination. The content of the road driving skills test varies depending on the type of vehicle being licensed. 2. Specific test content for Subject 3: The road driving skills test generally includes: vehicle preparation, light simulation test, starting, driving straight, gear shifting operations, changing lanes, parking by the roadside, going straight through intersections, turning left at intersections, turning right at intersections, crossing pedestrian crossings, passing school zones, passing bus stops, meeting vehicles, overtaking, making U-turns, and nighttime driving. The safe and civilized driving knowledge test generally includes: requirements for safe and civilized driving operations, knowledge of safe driving under adverse weather and complex road conditions, emergency handling methods for situations such as tire blowouts, and knowledge of handling after traffic accidents.
10
0
Share

How many cylinders does the Dongfeng Honda Civic have?

The Civic is equipped with two engines in total: one is a 1.0-liter turbocharged engine, which is a three-cylinder engine, and the other is a 1.5-liter turbocharged engine, which is a four-cylinder engine. Below is an introduction to the Civic: 1. In terms of appearance, the Civic incorporates a large number of black elements, such as the black front grille, side skirts, newly added small spoiler, and black glossy alloy wheels. The new model offers two exterior designs, with the main adjustments compared to the current model being the body color scheme and front bumper styling, further enhancing the sporty feel. The body dimensions are 4658/1800/1416mm, with a wheelbase of 2700mm. In terms of body colors, the new model will be available in six options: Flash Yellow, Platinum White Pearl, Dark Blue, Rallye Red, Brilliant Sporty Blue, and Crystal White Pearl. The interior will offer three color combinations: black, beige, and brown. 2. In terms of power, the Civic provides two engine options: a 1.0T and a 1.5T. The 1.5T engine can deliver a peak torque of 220N·m and a maximum power output of 130kW (177PS). The 1.5T model paired with a CVT transmission can accelerate from 0-100km/h in just 7.62 seconds, demonstrating excellent performance.
1
5
Share

Is it possible to shift into neutral without pressing the clutch?

Shifting into neutral also requires pressing the clutch pedal; otherwise, it is impossible to shift gears normally. Shifting into neutral means that the vehicle's gear lever is not placed in any forward or reverse gear, and the transmission is completely disengaged from the drive wheels. For manual transmissions, the neutral position is in the middle, while for automatic transmissions, it is marked with an "N." All forward gears in a manual transmission are equipped with synchronizers. When shifting gears, the clutch must be pressed to allow the rotating drive gear to jump to a larger gear ratio, while the driven gear or the driven gear with a smaller ratio achieves acceleration and deceleration effects at the same rotational speed. The consequences of not pressing the clutch are: shifting becomes more laborious; it causes excessive wear on the synchronizers inside the clutch, leading to damage due to shifting impact. The method to shift into neutral is: release the accelerator, press the clutch, and gently shift into neutral. Neutral refers to the state where the vehicle's gear lever is not placed in any forward or reverse gear, and the transmission is completely disengaged from the engine. For manual transmissions, the neutral position is in the middle, while for automatic transmissions, it is marked with an "N." The clutch is installed between the engine and the transmission and is the assembly component in the vehicle's drivetrain that directly connects to the engine. Its functions are: to ensure smooth vehicle startup and achieve seamless gear shifting.
9
2
Share

What is the minimum ground clearance of the BMW 530?

The minimum ground clearance of the BMW 530 is 105 millimeters. The minimum ground clearance of the BMW 530 refers to the distance between the lowest point (excluding the wheels) and the supporting plane, which indicates the vehicle's ability to pass over obstacles such as rocks and tree stumps without collision. A higher ground clearance for the BMW 530 improves its off-road capability, but if the ground clearance is too high, the stability at high speeds may decrease. The BMW 530 is a mid-to-large-sized sedan under the BMW Brilliance brand, featuring a three-box body structure. The dimensions of the BMW 530 are 5106 mm in length, 1868 mm in width, and 1500 mm in height, with a wheelbase of 3105 mm. Generally, the ground clearance for sedans ranges between 110 mm and 150 mm, while SUVs have a ground clearance between 200 mm and 250 mm. However, the ground clearance of the BMW 530 is not static; it also depends on the load condition. Therefore, changes in ground clearance should be considered based on the BMW 530's load variations. When selecting a vehicle, ground clearance can be one of the reference factors. The choice should depend on the vehicle's intended use and the road conditions. For urban areas with well-paved roads, a vehicle with lower ground clearance can enhance stability and comfort. For long-distance travel or driving in areas with poor road conditions, a vehicle with higher ground clearance may be preferable to avoid scraping or damaging the undercarriage.
12
5
Share

What are the differences between the CT5 and ATSL?

Differences between the CT5 and ATSL: 1. Suspension: The ATSL uses a double-ball-joint independent suspension for the front and a multi-link independent suspension for the rear. The CT5 employs a MacPherson independent suspension for the front and a multi-link independent suspension for the rear. 2. Engine: The ATSL's 2.0-liter turbocharged engine delivers a maximum power of 205 kW and a maximum torque of 400 Nm. The CT5's 2.0-liter turbocharged engine produces a maximum power of 177 kW and a maximum torque of 350 Nm.
1
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.