Where to Place the Vehicle Fire Extinguisher?

3 Answers
AnaDella
07/29/25 3:39pm
Vehicle fire extinguishers can be placed in the following locations: 1. Inside the glove compartment; 2. Beside the seat; 3. In the trunk. The storage environment temperature for vehicle fire extinguishers should be within the range of -10 to 45 degrees Celsius, and the placement location should be kept dry and ventilated to prevent the extinguisher from getting damp and corroding. Precautions for using vehicle fire extinguishers: 1. Do not cover the extinguisher with items; it should be easily accessible for quick retrieval; 2. Check the extinguisher pressure once a month; 3. Use the extinguisher correctly; 4. Fire extinguishers are only suitable for putting out initial fires; 5. Fire extinguishers have an expiration date and should be configured and replaced as required.
Was this review help?
20
3
Share
Poppy
08/14/25 9:29am
For the car fire extinguisher, I recommend placing it under the driver's seat or on the front passenger foot mat, securely fastened to prevent movement, such as with Velcro or a professional bracket. This ensures quick access in emergencies, where speed is crucial. Avoid storing it deep in the trunk, as door deformation in an accident could make retrieval difficult, and the glove box may also cause jamming. Choose a location away from high-temperature areas, such as near the engine or direct sunlight, as heat can reduce the extinguisher's lifespan. Check the pressure gauge monthly to ensure it's functioning properly, and replace it every two years or so, as per the typical validity period. An ABC dry powder type is most suitable for vehicles, covering common fire risks, and avoid choosing one that's too heavy to minimize space burden. I also keep a small first aid kit in the car, stored in the same location as part of coordinated safety measures, and the technician checks everything is in order during each maintenance service.
Was this review help?
10
1
Share
Expand All
OParker
10/12/25 3:05am
As a new car owner, I secured the fire extinguisher in the side pocket of the driver's seat, specifically purchasing a compact one with a fixing ring for easy access. Position it neither too high nor too low, avoiding the middle of the back seat or corners of the trunk to prevent wasting time searching during a fire. Ensure it's firmly fixed to prevent injury from movement during bumpy rides, and check its expiration date quarterly—replace immediately if expired. I avoid heat sources like under the dashboard or door compartments, as high temperatures can reduce effectiveness. For type selection, ABC powder extinguishers are the most convenient, with their small size saving space. During regular car washes, I clean the exterior dust to maintain performance—safety always comes first.
Was this review help?
16
1
Share
Expand All
More Forum Discussions

Where and What is the Registration Process for Electric Motorcycles?

Resident ID card or household registration booklet of the vehicle owner; purchase invoice of the vehicle; vehicle factory certificate. The owner or agent collects the "Electric Bicycle Registration/Transfer/Cancellation Application Form", and the owner or agent fills in the detailed information as required. Original proof of origin and original certificate of the electric bicycle, input registration information, and prepare to print the acceptance receipt. Determine the license plate number when printing the acceptance receipt.
1
2
Share

How to Use Ford's Cruise Control System?

Start the vehicle's cruise control by sliding switch A to the ON position to activate the speed control system. First, accelerate the car to the desired speed, press and release the SET+ button, then release the accelerator pedal. Press the accelerator or brake pedal until the desired speed is reached. Hold SET+ or SET- to adjust the set speed in increments of approximately 1 km/h. To completely turn off the cruise control system, slide the switch to the OFF position, or turn off the ignition when the car is stationary, and the system will be fully deactivated.
1
3
Share

What does a two-way lane mean?

Two-way lane refers to a road with two-way traffic, totaling two motor vehicle lanes left and right. Special two-lane roads: In China, secondary and tertiary highways are basically two-lane roads. For secondary highways in plain and hilly areas, when the mixed traffic volume is large and it is difficult to separate the slow lane, fast and slow lanes can be marked, but they still belong to two-lane roads. Lane setting: Fourth-class highways should be designed as two-lane roads, and single-lane sections can be used for areas with low traffic volume. For highways designed at 120km/h, depending on traffic capacity requirements, they can be set as one-way two-lane, three-lane, or four-lane roads, i.e., two-way four-lane, six-lane, or eight-lane roads. For highways and first-class roads designed at 100km/h, when the traffic volume exceeds the capacity of four lanes, the number of lanes can be increased in even numbers.
19
3
Share

Can Adding 98 Octane Gasoline Compensate for Using Poor Quality Gasoline?

Adding 98 octane gasoline cannot compensate for using poor quality gasoline; instead, you can refuel with 97 octane gasoline. Here are the specific details: Excessive Use of Poor Quality Gasoline: If a significant amount of poor quality gasoline has been added, it is necessary to completely remove the remaining gasoline from the fuel tank and refill with higher quality gasoline. Additionally, the fuel injectors and combustion chamber need to be cleaned, and the fuel filter and fuel pump should be replaced to prevent clogging from excessive impurities. Hazards of Using Poor Quality Gasoline: Using low-quality gasoline can leave severe deposits in the cylinders. Over time, this leads to significant carbon buildup, which is very difficult to remove and can severely damage the engine.
2
4
Share

What are the two wires on a car horn connected to?

One end of the car horn is connected to the positive terminal of the power source, while the other end is connected to the negative terminal through a relay. The horn button controls the relay, thereby indirectly controlling the connection and disconnection between the horn and the battery's negative terminal. Horn wire connection method: The horn has only two wires. When connecting, the red wire should correspond to the red port, and the black wire should correspond to the black port. Separate the two wires of the horn and strip about 2 cm of insulation. Use scissors to trim the wire ends neatly, fold them in half, then insert the red wire into the red socket and the black wire into the black socket using the same method. For nut-direct compression type connections, form the wire ends into a circular shape and wrap them around the screw between the bolt and nut, then tighten the nut to secure. Always ensure the red wire connects to the red port and the black wire to the black port during connection.
19
3
Share

What to Do When the Ford EcoSport Steering Wheel Locks?

Use your hand to slightly steady the steering wheel, check whether the gear in the car is in neutral, and whether the handbrake is pulled to avoid accidental harm to subsequent operations. Insert the key to unlock, turn the steering wheel left and right. If it can turn, it means it has returned to normal. If the key cannot turn, you need to turn both the steering wheel and the key simultaneously. Turn the steering wheel counterclockwise while twisting the key, moving little by little until the key can ignite the engine. Hold the steering wheel with your left hand and gently shake it, while simultaneously shaking and twisting the key with your right hand to unlock.
15
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.