Where to Place the Novice Driver Sticker on a Car?

1 Answers
MacJosephine
07/24/25 3:09am
The novice driver sticker should be affixed or hung in a conspicuous position on the rear window glass or the rear body of the car. Below is some relevant information about the novice driver sticker: 1. There are two types of novice driver stickers: One is magnetic, and the other is suction cup-based. The magnetic novice driver sticker can be directly attached to the rear exterior shell of the car, while the suction cup-based sticker is affixed to the inside of the rear window glass. If the novice driver sticker is lost or damaged, you can print a new one online. 2. Relevant legal regulations: The first 12 months after a motor vehicle driver initially obtains a driver's license is considered the probationary period. During this probationary period, when driving a motor vehicle, a uniform-style novice driver sticker must be affixed or hung at the rear of the vehicle. Failure to affix or hang the novice driver sticker as required will result in a fine of 20 yuan.
Was this review help?
18
3
Share
More Forum Discussions

What happens when engine oil reaches the upper limit?

The effects of engine oil reaching the upper limit are as follows: 1. Increased resistance and reduced power: It increases the rotational resistance of the crankshaft, reducing the engine's output power. 2. Increased fuel consumption: Excess oil can enter the combustion chamber and participate in combustion, causing the vehicle to burn oil, emit blue smoke, and consequently increase fuel consumption. 3. Increased carbon deposits: The residue from burned oil accumulates on the walls of the combustion chamber, reducing the space in the combustion chamber, thereby lowering the engine's compression ratio. It also accelerates wear on the cylinders and pistons, reducing the vehicle's lifespan. Note: When adding engine oil, it is advisable to keep the level slightly below the mark on the dipstick.
9
4
Share

What to Do When a Car Tire Bursts on the Road?

If a tire bursts while driving, it is essential to remain calm. Keep both hands firmly on the steering wheel and maintain control of the vehicle's direction. Gradually release the accelerator and use intermittent braking to bring the car to a slow stop. Below are the common causes of tire bursts: 1. High temperatures leading to tire bursts. 2. Overloading causing tire bursts. 3. Speeding resulting in tire bursts. 4. Poor road conditions leading to tire bursts. 5. Tire pressure not meeting safety requirements causing tire bursts. 6. Internal damage to the tire or bubbles in the tire cord layers leading to bursts. 7. Excessive wear on the tire surface or corrosion by oil substances resulting in tire bursts.
17
4
Share

How to Change the Name of BMW ConnectedDrive?

BMW ConnectedDrive name can be changed by following these steps: 1. Start the car; 2. Open the iDrive menu; 3. Find the driver profile option to change the ConnectedDrive name. Taking the 2020 BMW 325i as an example, its body dimensions are: length 4719mm, width 1827mm, height 1459mm, wheelbase 2851mm, and fuel tank capacity 59L. The 2020 BMW 325i is equipped with a 2.0T turbocharged engine, with a maximum horsepower of 184PS, maximum power of 135kW, maximum torque of 300Nm, and is paired with an 8-speed automatic transmission.
1
4
Share

How to reset the maintenance reminder for a 2017 Jeep Compass 1.4?

The method to reset the maintenance reminder for a 2017 Jeep Compass 1.4 is: use a diagnostic computer to enter the special functions and select the maintenance reset option. Resetting the maintenance light means clearing the reminder information after servicing, which is essentially a reset of the information. The body dimensions of the 2017 Jeep Compass are: length 4415mm, width 1819mm, height 1625mm, wheelbase 2636mm, minimum ground clearance 199mm, and fuel tank capacity 60L. The 2017 Jeep Compass is equipped with a 1.4T turbocharged engine, with a maximum power of 121kW and a maximum torque of 250Nm, paired with a 6-speed manual transmission.
13
0
Share

How to Distinguish the Front and Back of Car Tires?

Methods to distinguish the front and back of car tires are as follows: 1. Unidirectional tires: An arrow mark can be seen on the sidewall of the tire. During installation, simply align the arrow forward. 2. Symmetrical tires: There is no distinction between front and back. 3. Asymmetrical tires: The word "outside" is engraved on one side of the tire. During installation, ensure the "outside" marking faces outward. Functions: Ensures good ride comfort and smooth driving; ensures excellent adhesion between the wheels and the road surface; improves the car's traction, braking, and off-road capability; bears the weight of the car.
6
4
Share

What are the reasons for a car's Bluetooth connection failure?

There are several situations where a car's Bluetooth may fail to connect: 1. Exceeding the communication range of the car's Bluetooth: When the mobile device goes beyond the communication range of the car's Bluetooth, connection failure may occur. Solution: Bring the phone closer to the car's Bluetooth device and reconnect. 2. System incompatibility: When the phone's system is incompatible with the car's Bluetooth system, connection failure may also occur. Solution: Update the phone's system to the latest version and reconnect to the car's Bluetooth system. 3. Unstable electronic device factors: Unstable factors in electronic devices may cause the car's Bluetooth to fail to connect. Solution: Restart the phone and attempt to connect to Bluetooth again.
5
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.