Where to Place the Novice Driver Sticker?

1 Answers
GabrielaLee
07/29/25 8:12pm
Novice driver stickers should be placed on the rear of the vehicle. New drivers can obtain free novice driver stickers from traffic police departments and must affix or hang them as required. New drivers can collect the stickers at traffic violation processing windows of local traffic police brigades or vehicle management offices by presenting their driver's license. Relevant information about vehicle emblems is as follows: 1. Introduction: "Vehicle emblem" is the abbreviation for automobile logos, referring to the badges of various car brands, which often serve as representatives of automobile manufacturers. Vehicle emblems include: the car's trademark or factory logo, product labels, engine model and serial number, vehicle model and serial number, as well as the vehicle identification number (VIN), etc. 2. Prohibition of Unauthorized Alteration of Vehicle Emblems: Unauthorized alteration of vehicle emblems violates the "Motor Vehicle Management Regulations": The vehicle emblem must match the model of the car, and borrowing emblems is not allowed. If discovered, penalties will be imposed in accordance with national regulations concerning the technical safety requirements for motor vehicle operation.
Was this review help?
2
0
Share
More Forum Discussions

What to Do When a Manual Transmission Car Stalls?

Manual transmission car stalling solutions are: 1. If the car stalls suddenly while driving, do not turn off the ignition switch completely, otherwise the steering wheel will lock and cannot be turned. 2. Press the clutch pedal, shift to second gear, and then quickly release the clutch pedal; the engine will automatically restart. 3. If the car stalls suddenly at low speeds, such as when overcoming obstacles, going uphill, or driving onto the road, stop the car, apply the handbrake, shift to neutral, and restart the engine. A manual transmission car requires manually moving the gear lever to change the gear meshing position inside the transmission, altering the gear ratio to achieve speed change. The gear lever can only be moved when the clutch is depressed.
17
1
Share

What are the standard values for wheel alignment?

Wheel alignment standard values: 1. The camber for each single wheel should not exceed 110, with a total camber of 0.50; 2. The toe-in for each single wheel should be around 0.15, with a total toe-in around 0.30. The dimensions and chassis height of each vehicle are different, so there is no exact standard range for wheel alignment data. The solution is to use instruments to measure it. Wheel alignment ensures the tight contact between the tires and the ground by adjusting the geometric angles of the tires, steering, suspension, and other components. If the vehicle drifts during driving, the steering accuracy deteriorates, the suspension or steering system has been replaced or repaired, or there is severe tire wear, a wheel alignment is necessary.
1
1
Share

What do the plus and minus signs on an automatic transmission mean?

Automatic transmission plus and minus signs indicate manual mode. In manual mode, the driver can manually upshift or downshift, similar to driving a manual transmission vehicle where the car won't automatically shift gears. Typically, only automatic transmissions with manual mode (often called "manumatic" or "Tiptronic" transmissions) feature these symbols, with the letter "M" usually appearing between the plus and minus signs. The vehicle can be switched to manual mode at any time without restrictions like speed or RPM - the transmission will automatically match the appropriate gear based on real-time vehicle speed. Manual mode is commonly used for situations like uphill/downhill driving, overtaking, starting on icy/snowy roads, or in heavy traffic. When switched to manual mode, the car's display will show the current gear (e.g., D1 for 1st gear, D2 for 2nd gear, and so on).
5
3
Share

How to Fasten the Rear Seat Belts in Baojun 530?

Baojun 530 rear seat belt fastening method: 1. Pull the seat belt down from the ceiling; 2. After sitting down, first insert the end latch plate into the buckle on the right side of the seat (the red release button is on the side of the buckle); 3. Then insert the movable latch plate into the buckle on the left side of the seat. The overall design of Baojun 530 continues the rugged and bold styling, featuring a dot-matrix starry grille. It comes equipped with LED daytime running lights, front and side airbags for driver and passenger, front and rear head airbags, tire pressure monitoring system, child seat anchors, ABS anti-lock braking system, electronic brakeforce distribution, and brake assist.
4
0
Share

What does a yellow exclamation mark in the car mean?

The appearance of an exclamation mark on the car dashboard indicates an abnormality or malfunction in the corresponding system. There are many indicator lights on the car dashboard that feature an exclamation mark, such as the tire pressure indicator, lighting fault indicator, steering system fault indicator, brake system fault light, transmission fault indicator, and wiper fault indicator. Below is a detailed introduction to the exclamation mark warning lights: General Fault: A triangle with an exclamation mark inside indicates a general performance or component and function fault in the car. This mainly includes parking sensor faults, fuel cutoff system intervention or faults, external light faults, engine oil pressure sensor faults, etc. It is necessary to visit a 4S shop for inspection to identify the source of the fault. Automatic Transmission Fault: A yellow gear with an exclamation mark inside is the automatic transmission fault warning light, indicating a fault in the transmission or transmission lubricant being below the normal range. The transmission oil should be replaced promptly. Brake System Fault: An exclamation mark inside a circle with parentheses represents a brake system warning, mainly indicating a fault in the brake system or low brake fluid level. The brake system should be inspected immediately to avoid accidents. Tire Pressure Anomaly: An exclamation mark with a horizontal line below parentheses represents the tire pressure monitoring warning light. This light will illuminate when the tire pressure is too low. Check the tire pressure and restore it to the normal range. Lighting Fault: A yellow bulb with an exclamation mark is the lighting fault indicator, indicating a fault in the car lights. Solution: Visit a 4S shop for inspection as soon as possible, or check yourself, focusing on commonly used bulbs such as turn signals, fog lights, and interior lights to identify the issue. In addition, during daily vehicle use, the warning lights displayed on the dashboard are divided into two colors: yellow and red: Yellow indicates a fault in the corresponding system that is not very serious. Reduce speed and proceed to the nearest repair point to eliminate potential hazards. Red indicates a very serious problem in the corresponding system. In this case, do not continue driving. Pull over immediately and seek professional help to prevent unpredictable dangers to the vehicle and personal safety. Note: When the car is started, all lights will illuminate for a system self-check and will turn off automatically after the check is completed. If a light does not illuminate when the ignition is turned on, remains lit, or lights up while driving, it indicates a fault in the related system. In such cases, seek professional help promptly for inspection and elimination of potential hazards.
13
1
Share

Can Mercedes-Benz Use 92 Octane Gasoline?

Mercedes-Benz cannot use 92 octane gasoline; it generally requires 95 or 97 octane gasoline. Different gasoline octane ratings represent varying levels of octane in the fuel, which refers to the amount of anti-knock additives in the gasoline. Whether it's 92 or 95 octane, the quality of the gasoline is the same and unrelated to cleanliness; the difference lies in the quantity of anti-knock additives. Mercedes-Benz is a German automotive brand renowned for luxury and high performance, headquartered in Stuttgart, Germany, and is a member of the Daimler AG. Its product line includes various passenger cars and medium-to-large commercial vehicles. The Mercedes-Benz S-Class is the longest-wheelbase model in the Mercedes-Benz sedan lineup, with main competitors being the BMW 7 Series, Jaguar XJ, and Audi A8.
20
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.