Where to Place the Jack for Wuling Hongguang?
3 Answers
For the front wheel jack of Wuling Hongguang, it should be placed under the co-driver's seat, on the raised position of the beam. When changing a tire, the jack should be positioned under the chassis, near the wheel's raised area. Operate the jack steadily and rhythmically when lifting, and lower it slowly. If using multiple jacks simultaneously, ensure synchronized operation. After use, thoroughly inspect the jack for hydraulic pressure and potential hazards, perform maintenance, and store it properly. Jacks can be categorized by structure into rack jacks, screw jacks, and hydraulic jacks. Here are the details: 1. Screw Jack: The screw jack lacks self-locking threads and is equipped with a brake. Releasing the brake allows the load to descend quickly, reducing return time, but this type is more complex in construction. Screw jacks can support loads for extended periods, with a maximum capacity of up to 100t, making them widely used. Adding a horizontal screw at the bottom enables slight lateral movement of the load. 2. Hydraulic Jack: Used in hydraulic transmission systems as an intermediary medium, it transfers and converts energy while also lubricating, protecting against corrosion, cooling, and cleaning system components. 3. Electric Jack: Equipped with a pressure retention device to prevent overpressure. If overpressure occurs, the jack may not return to a certain position. Special structures provide dual protection. Adding a diving device allows achieving high travel with low height.
The first time I changed a tire on my Wuling Hongguang, I also struggled with this issue. The key is to locate those reinforced points on the chassis. Usually, there are specific small platforms or grooves near the front and rear wheels under the frame, and the clearly marked spots are the jacking points. Never place the jack on the suspension or plastic parts, as this can deform the body and even cause the jack to slip, leading to danger. I recommend checking the vehicle manual or looking for arrow markings near the wheel hubs—that’s the most straightforward way. Regularly inspect the chassis to keep these points clean and rust-free, making tire changes safer and easier. Additionally, the Wuling Hongguang’s chassis design is quite sturdy. Once you find the right spot, gently lift and listen for a stable sound. Don’t forget to use wheel chocks to prevent rolling—these small details can prevent many accidents.
Friend, I remember when I first got my Wuling Hongguang, I had no idea where to place the jack. Actually, it's on the metal strip near the wheels, specifically on the chassis longitudinal beam behind the front wheels or in front of the rear wheels. Look for reinforced areas with bumps or different colors, then place the jack and slowly lift it up, keeping your hands at a safe distance. I also recommend engaging the handbrake before changing a tire and securing the wheels for safety. If you can't find the spot, gently tap the chassis and listen—solid sounds indicate the correct position, while hollow sounds might mean damage. With a few practices, you'll get the hang of it. No rush.
