Where to Place the Gecko Emblem on a Car?

1 Answers
OKyle
07/29/25 8:05pm
The gecko emblem is typically placed on the rear part of the car. Below is an introduction to related emblem placement: 1. Emblem Types: Compulsory Traffic Insurance Emblem, Vehicle Annual Inspection Certification Emblem, and Environmental Inspection Certification Emblem. 2. Placement Location: These emblems should all be affixed to the upper right corner of the car's front windshield. 3. Validity Period: These emblems are valid for one year and need to be replaced annually. Below is extended information about tire pressure monitoring system malfunctions after changing rims: 1. Direct TPMS: Direct Tire Pressure Monitoring Systems use pressure sensors installed on the valve stem or inside the tire to measure tire pressure. When changing rims, if the sensor is on the rim's valve stem, it must be removed and installed on the new rim, followed by resetting the tire pressure monitoring system. 2. Indirect TPMS: Indirect Tire Pressure Monitoring Systems calculate tire pressure by measuring the tire's rolling radius through the computer. Changing rims of the same size has no effect on this system. 3. Hybrid TPMS: Hybrid TPMS also uses sensors for monitoring. After changing rims, the tire pressure sensors must be transferred to the new rims and the system reset.
Was this review help?
15
3
Share
More Forum Discussions

Is the Audi Q8 an imported car?

Audi Q8 is the new flagship model of Audi and is an imported vehicle. In terms of body dimensions, the Audi Q8 measures 4986mm in length, 1995mm in width, and 1704mm in height, with a wheelbase of 2995mm. The Audi Q8 is equipped with two engines: a 2.0-liter turbocharged engine and a 3.0-liter turbocharged engine. More details about the Audi Q8 are as follows: 1. The 2.0-liter turbocharged engine has a maximum power of 180kW, with the maximum power achieved at 5000 to 6000 rpm, and a maximum torque of 370 Nm, with the maximum torque achieved at 1600 to 4500 rpm. This engine features hybrid injection technology and uses an aluminum cylinder head and cast iron cylinder block. 2. The 3.0-liter turbocharged engine has a maximum power of 250kW, with the maximum power achieved at 5300 rpm, and a maximum torque of 500 Nm, with the maximum torque achieved at 1500 to 5300 rpm. This engine is equipped with a 48V mild hybrid system and direct fuel injection technology, and uses an aluminum cylinder head and block.
4
3
Share

Is the 4008 equipped with independent suspension?

The Peugeot 4008 does not fully use independent suspension. The front suspension of the Peugeot 4008 uses an independent suspension, while the rear suspension uses a non-independent suspension. Independent suspensions are divided into MacPherson strut independent suspension, multi-link independent suspension, and double wishbone suspension system. MacPherson strut independent suspension: Generally used for the front wheels of small cars. Its design structure is simple, relatively lightweight, occupies less space, and is more convenient for the layout of the engine space. Comparatively, it has strong shock absorption performance. However, its stability is slightly weaker, and it is currently mainly used in the front suspension of household small cars. Multi-link independent suspension: The multi-link suspension system connects the wheels to the body using various linkage devices, with 4 to 5 links being the most common currently. This type of independent suspension system is also currently the best-performing in suspension design, naturally with higher costs. The positioning of the wheels can be automatically adjusted, offering excellent controllability. Double wishbone suspension system: The double wishbone suspension system has upper and lower wishbones, with lateral forces absorbed by both wishbones simultaneously, and the strut only bears the weight of the frame, thus having great lateral stiffness. Therefore, cars using this type of suspension have excellent roll control during aggressive driving and high grip. Additionally, its longitudinal height is significantly lower than that of the multi-link type, making it more conducive to the layout of the car's chassis, so it often appears in some small-sized, low-height, and very low-drag performance cars.
7
2
Share

How often should new car tires be replaced?

You can determine whether new car tires need to be replaced based on the following criteria: 1. Car tires should be replaced every 3 to 5 years or 40,000 to 60,000 kilometers: After 2 to 3 years of use, small cracks will gradually appear on the sidewalls. If cracks are found, the tires should be replaced promptly. 2. If the tires have not reached the wear limit or mileage: Tires should also be replaced when they reach 5 years of use or when a large number of cracks appear on the sidewalls. As long as the tire sidewalls have not been impacted and the cords are not broken, they can continue to be used. 3. Tires need to be replaced when the actual wear limit is less than 1.6 mm: The triangular marks on the tire sidewalls can help the owner find a protrusion in the tread grooves to determine the actual wear limit of the tire. This value should be greater than 1.6 mm. If it is less than 1.6 mm, the tires need to be replaced.
14
4
Share

What does the 'mode' in a car represent?

"mode" means pattern or direction, often located on the multifunction steering wheel and center console. Its meaning varies depending on its location, as follows: 1. If mode is located on the multifunction steering wheel, it serves as a button to control the car's multimedia switching, used to toggle between FM radio, AM radio, CD, or USB modes. 2. If mode is located in the air conditioning control area of the center console, it serves as a button to switch the car's air conditioning outlet mode, usually toggling between foot, head, and windshield modes.
1
3
Share

How to adjust the car body in Subject 2?

Subject 2 car body adjustment methods are as follows: 1. The principle of adjusting the direction is based on the rear of the car, keeping in mind the principle of steering towards the side the rear is leaning. If you want the rear of the car to move to the right, turn the steering wheel to the right; if the rear moves to the left, turn the steering wheel to the left. Once the car body is adjusted, promptly straighten the steering wheel. 2. To achieve parallelism, observe the width on both sides in the left and right rearview mirrors. When the widths on both sides are equal, the car body adjustment is complete. If the car body is already aligned and parallel to the sideline, simply reverse the vehicle. If the car body is not parallel to the sideline, make minor adjustments until it is parallel.
13
4
Share

How to reset the system after changing the oil for the 2019 Buick Excelle?

When the remaining oil life is too low, the screen will display the message "Please change the oil soon." At this time, the oil should be changed as soon as possible. The method to reset the system after changing the oil for the 2019 Buick Excelle is as follows: 1. Locate the vehicle ignition switch in the ON position. 2. Press the menu button on the turn signal. 3. Enter the vehicle information and oil life system. When you see the turn signal switch displaying "Set/Clear," press the button while simultaneously stepping on the vehicle brake pedal. Information about oil changes is as follows: 1. When it is found that the oil in the engine oil pan is insufficient, it should be added or replaced in time to avoid poor lubrication of bearings and journals due to oil problems, which will aggravate the wear of parts and may even cause a bearing seizure accident. 2. The oil life screen must be reset manually after each oil change. It will not reset itself.
3
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.