Where to Place the ETC Tag?

1 Answers
VonDaniella
07/29/25 4:04pm
The ETC installation position for passenger cars is generally in the upper middle section of the front windshield, while for large vehicles like trucks and buses, it is installed in the lower middle section. The appropriate installation position should be at a height no lower than 1.2 meters and no higher than 2.5 meters, with an installation angle between 30 to 90 degrees. For vehicles with factory-installed or aftermarket explosion-proof film, which may affect microwave communication signal transmission, the ETC should be installed in the microwave sunroof strip. ETC stands for Electronic Toll Collection. To apply for ETC, the vehicle owner needs to provide original and photocopied versions of their valid ID card and vehicle registration certificate. If the application is handled by a non-owner, the agent's valid ID card is also required. The photocopy of the vehicle registration certificate should include the page with the most recent annual inspection stamp. Additionally, a bank card for deducting highway tolls is needed, and the vehicle must be registered under an individual aged between 18 and 60. Here are some precautions for ETC installation: Do not obstruct the driver's view. The best position is behind the rearview mirror: Many car models have windshields with a steep rearward angle, which can reduce the driver's field of vision. Installing the ETC without considering this may increase blind spots. Installing it on the right side behind the rearview mirror can help avoid obstructing the view. Do not interfere with charging: The ETC electronic tag consumes power but generally does not require charging or battery replacement, as it has a built-in solar panel on the back for self-charging. Therefore, during installation, avoid the blackened areas on the windshield and positions that may block the solar panel. Do not remove the tag arbitrarily once installed: The button in the middle of the adhesive is an anti-removal lever connected to a switch. After installation, the windshield will press the lever in. If the tag is removed arbitrarily, the lever will pop out and trigger the switch, locking the electronic tag and rendering it unusable. In such cases, you will need to visit an ETC service point to unlock it. This mechanism is designed to prevent multiple vehicles from sharing a single device. ETC usage tips: The ETC transaction sensing range is 8 meters. To avoid paying for the vehicle in front due to its faulty ETC device, maintain a distance of at least 10 meters from the vehicle ahead. The ETC lane recognizes vehicles at a speed of 20 km/h; driving too fast may result in failed fee deduction due to inability to read the vehicle's device information. When using a debit card linked to ETC, insufficient balance may also cause fee deduction failure.
Was this review help?
2
3
Share
More Forum Discussions

Can Hefei Apply for an Electronic Driver's License?

Hefei can apply for an electronic driver's license, and you can directly go to the vehicle management office to apply. Definition of Electronic Driver's License: As a supplement to physical documents, electronic documents can also be accepted for road inspections when physical documents are not carried. Development History of Electronic Driver's License: On April 12, 2017, Yancheng Traffic Police launched an "Electronic Driver's License," mainly to provide convenience to the public, not to advocate or encourage drivers not to carry their driver's licenses with them. On May 10, 2021, the Ministry of Public Security held a press conference to release 12 convenience measures for deepening the reform of "streamlining administration, delegating power, improving regulation, and upgrading services" in public security traffic management under the theme "I do practical things for the masses," announcing that starting from June 1, 2021, pilot projects for the electronicization of motor vehicle driver's licenses would be carried out in three cities: Tianjin, Chengdu, and Suzhou.
2
4
Share

What is required for vehicle inspection?

Vehicle inspection requires: original copy of compulsory traffic accident liability insurance certificate, safety technical inspection qualification certificate, original vehicle license, vehicle and vessel tax payment certificate, and original ID card of the vehicle owner. Vehicle inspection content: As the main technical basis for safety technical inspections such as new vehicle registration, periodic inspection of used vehicles, and accident vehicle inspection by the traffic management department of public security authorities, the inspection mainly checks vehicle exhaust, brakes, lights, chassis, etc. The inspection is divided into exhaust emission testing, axle appearance inspection, wheel weight and brake inspection, and vehicle slip offset measurement. Inspection schedule: New vehicles require an annual inspection every 2 years within the first 6 years, and annually thereafter. The purpose of the inspection is to ensure that the vehicle meets basic safety conditions for road use. After each inspection, the data will be printed on the duplicate of the vehicle license, and the displayed date indicates the next inspection time.
5
1
Share

Can You Change Engine Oil When the Engine is Still Hot?

You can change the engine oil when the engine is still hot. Introduction to Engine Oil: Currently, engine oils are categorized into three types: conventional mineral oil, semi-synthetic oil, and full synthetic oil. Based on quality grades, engine oils are mainly classified into SG, SJ, SL, SM, and SP, with SP being the highest grade in automotive engine oils, meeting the lubrication requirements for most vehicle engines. Precautions for Oil Change: It is necessary to select the appropriate engine oil model according to the local temperature to prevent the oil from freezing in extremely cold weather. Moreover, engine oil must be changed regularly and timely based on the type of oil used, with replacement cycles corresponding to six months, nine months, and twelve months respectively.
15
2
Share

How many points are deducted for overtaking in congested sections?

Overtaking in congested sections deducts 2 points. Pre-departure inspection: Before setting off each day, conduct a comprehensive vehicle check, including checking for oil or water leaks, measuring tire pressure to ensure it is appropriate, inspecting the engine oil condition to verify its color is normal and the oil level is correct. Safe driving: Use seat belts correctly; in the event of a severe collision, seat belts provide protection no less effective than airbags. Avoid fatigue driving; take a break every 2 hours. Traffic rule compliance: Especially on highways, do not speed. Speeding not only risks traffic police penalties but, more importantly, is unsafe.
3
5
Share

What are the components of the intake system?

The intake system consists of an air filter, air flow meter, intake pressure sensor, throttle body, auxiliary air valve, idle control valve, resonance chamber, and power chamber. A complete intake system can be divided into two parts: the engine intake manifold system and the air intake system. The main functions of the intake system: To deliver clean, dry, sufficient, and stable air to the engine to meet its requirements, preventing impurities and large dust particles from entering the engine combustion chamber, which could cause abnormal engine wear. How the intake system works: When the engine is running, the driver controls the throttle opening via the accelerator pedal to adjust the intake volume and regulate engine operation. Air entering the engine passes through the air filter to remove dust and other impurities, then flows through the air flow meter, moves along the throttle passage into the power chamber, and is distributed to each cylinder via the intake manifold. During cold engine idling, some air bypasses the throttle through the auxiliary air valve or idle control valve and enters the cylinder. Benefits of cleaning the intake system: Effectively cleans and removes colloids and carbon deposits inside the nozzles, maintaining the cleanliness of the fuel system. Cleans the exhaust gas recirculation system, reduces emissions, saves fuel, and effectively protects the oxygen sensor and catalytic converter. Helps prevent symptoms such as explosions, unstable idling, and poor acceleration caused by colloids and carbon. Removes carbon deposits from the valve seats, lubricates the valves and valve guides, improves sealing, restores cylinder pressure, and enhances power. Cleans carbon deposits from the combustion chamber, lubricates the upper part of the cylinder, reduces piston ring wear, and extends service life.
12
2
Share

Why does a motorcycle start and then stall after a dozen seconds?

The reason a motorcycle starts and then stalls after a dozen seconds is due to: clogged idle air jets, malfunctioning idle devices, and carburetor or fuel line blockages. Pre-ride inspection: Check the motorcycle's condition, ensuring the headlight, turn signals, horn, handlebars, etc., are functioning properly. Attire and protective gear: A helmet is a legally required protective device, and brightly colored clothing should be chosen. Traffic rules compliance: Avoid racing with cars, drive safely according to traffic laws, and yield to pedestrians. Do not follow too closely; maintain an appropriate distance behind the right rear corner of the vehicle ahead. When overtaking, pass from the left side of the vehicle ahead; avoid passing on the right or between two parallel vehicles. On highways, motorcycles should not exceed 80 kilometers per hour, as exceeding this limit may result in penalties from traffic police.
14
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.