Where to Place Glasses in the Car?

2 Answers
DiCaleb
07/24/25 10:52am
When placing glasses, they can be stored in the car's built-in glasses compartment, which is located beneath the dashboard. Storing glasses in this compartment not only avoids direct sunlight exposure but also prevents dust from settling on them, ensuring both safety and hygiene. Below is an introduction to driver's glasses: 1. Overview: Driver's glasses (driving glasses) are designed based on the principle of light polarization. When sunlight reflects off the road or water surface, it directly irritates the eyes, causing glare, fatigue, and difficulty in maintaining clear vision. 2. Function: During nighttime driving, the bright headlights of oncoming vehicles can create a dark blind spot ahead. High-quality nighttime driving glasses significantly reduce the amount of light entering the eyes from these headlights, thereby minimizing the blind spot and enhancing nighttime driving safety. 3. Principle: The key feature of driver's glasses is their ability to effectively block and filter scattered light beams. This ensures that light enters the eyes along the correct optical axis, providing clear and natural vision. Similar to the principle of Venetian blinds, light is adjusted to enter uniformly, making the scenery appear soft and non-glaring.
Was this review help?
16
4
Share
StGianna
08/11/25 5:54am
Finding a safe and convenient spot for glasses in the car is crucial. With years of driving experience, I’ve seen many fellow drivers misplace theirs, leading to melted frames or scratched lenses. A key no-go zone is the dashboard under the windshield—summer heat can skyrocket cabin temperatures, potentially warping plastic frames, scratching lenses, and even shortening the lifespan of polarized lenses. My go-to is the glove compartment: cool, dust-free, and easy to access when parked. Alternatively, the door pocket is a stable, slip-proof option. For safety, avoid tossing glasses casually; instead, make it a habit to store them in a compact case for quick access during low visibility. In sudden stops, flying glasses pose risks, so lower spots like the center console tray are far safer.
Was this review help?
8
3
Share
Expand All
More Forum Discussions

Which district in Tianjin does the license plate starting with Jin F belong to?

License plates starting with Jin F are not district-specific. The letters on the license plate represent the prefecture-level city code where the vehicle is registered, generally assigned by the provincial vehicle management office based on the status of each prefecture-level city, with A being the provincial capital and B the second-largest city. Jin F is the license plate for Tianjin City (Jin F) in Tianjin Province. If you need to handle services such as license plate registration, annual inspections, or traffic violation processing, you can visit the Tianjin (Jin F) Vehicle Management Office. Below is some relevant information: 1. The license plate number is the identification number of the vehicle, just like an ID number for a person. For cars, the license plate number has a two-row structure, with the upper row being the vehicle registration authority code and the lower row being the license plate number. For motorcycles, the license plate number has a left-right structure, with the left side being the vehicle registration authority code and the right side being the license plate number. 2. The currently used 92-style vehicle license plates consist of a Chinese character and an English letter representing the issuing authority code, followed by a five-digit number. For example, "Su A-12345"—"Su" represents Jiangsu Province, and A is the issuing code of the Nanjing Public Security Bureau Vehicle Management Office, indicating that the license plate was issued by the Nanjing Public Security Bureau Vehicle Management Office. The following five digits are the serial number.
5
0
Share

Does a Car Get Affected If Left Unused for a Long Time?

When a vehicle is left unused for an extended period, components such as the battery, engine oil, lubricants, braking system, and electronic parts may experience varying degrees of aging and damage. Here are some relevant details: 1. Before reuse, it is advisable to thoroughly inspect and replace the "five oils and three fluids," including the battery, engine oil, and coolant. Additionally, the tire pressure of all four tires must be checked, and if severe tire aging is detected, all four tires should be replaced promptly. 2. For vehicles parked for long durations, covering them with a car cover can prevent dust accumulation. Moreover, choosing the right parking location is crucial—avoid parking under trees, in direct sunlight, low-lying areas, or underground parking lots with poor drainage. If possible, opt for an above-ground indoor parking facility. Ideally, start the vehicle at least once a week and drive it for more than 10 kilometers each time, as this is the best way to prevent aging.
15
0
Share

How to Check Engine Oil Level Using the Dipstick?

Park the vehicle on level ground and wait until the engine cools down. Remove the oil dipstick, wipe it clean with a soft cloth, reinsert it fully, then remove it again to check. If the oil mark is below the MIN line, it indicates low oil level; if between MIN and MAX, the oil level is appropriate; if above MAX, there's excessive oil. Here are relevant details: 1. Always check when the engine is cold, as cold measurements are more accurate than hot ones. Temperature affects oil viscosity - high oil temperature may yield false readings. 2. The dipstick must be fully inserted; partial insertion won't provide accurate oil level information. Parking on level ground and waiting for cooling is necessary because most engines use splash lubrication. Only after the engine stops and oil fully drains back to the oil pan while maintaining level can the dipstick show precise oil quantity. 3. Engine oil is as vital to a car as blood is to the human body. Beyond lubricating the engine, it performs cleaning, cooling, sealing, and anti-wear functions. Regular oil checks are absolutely beneficial, especially for models prone to oil consumption issues where more frequent monitoring is essential.
3
3
Share

The Function and Faults of Oxygen Sensor

The function of the oxygen sensor is: 1. To measure whether there is excess oxygen in the exhaust after engine combustion, converting the oxygen content into a voltage signal and transmitting it to the engine computer, enabling the engine to achieve closed-loop control with the excess air factor as the target, thereby improving the fuel combustion quality of the automobile engine. 2. To ensure that the three-way catalytic converter has conversion efficiency for the three pollutants in the exhaust—hydrocarbons, carbon monoxide, and nitrogen oxides—facilitating the conversion and purification of emission pollutants. The faults of the oxygen sensor include: 1. Sensor poisoning and carbon buildup. 2. Ceramic breakage of the oxygen sensor, burnout of the heater resistance wire, and internal wiring disconnection of the oxygen sensor.
19
2
Share

What are the functions of the clutch, brake, and accelerator respectively?

The functions of the clutch, brake, and accelerator are as follows: 1. The clutch ensures smooth starting of the car and enables seamless gear shifting. 2. The brake is used to slow down a moving car until it comes to a complete stop. 3. The accelerator controls the engine's throttle opening by regulating the amount of pedal depression, thereby managing the air intake. The computer then controls the fuel injection to regulate the engine's speed. Introduction to the brake: 1. Braking refers to the action of stopping or reducing the speed of a moving locomotive, vehicle, or other transportation tools or machinery. 2. The general principle of braking involves fixing a wheel or disc on the high-speed shaft of the machine and installing a corresponding brake shoe, band, or disc on the machine base, which generates a braking torque under external force.
8
3
Share

What Causes Low Idle Speed in Vehicles?

Here are the reasons for low idle speed in vehicles: 1. Oil accumulation and carbon deposits in the throttle body, or dirty intake passages: As the vehicle is used over time, the intake passages can become clogged. Carbon deposits or oil in the throttle body can cause unstable idle speed or even low idle speed. It is recommended that owners clean the throttle body and intake passages to avoid abnormal idle conditions. 2. Weak spark due to faulty spark plugs: Over time, spark plugs can also accumulate carbon deposits. When the deposits become severe, weak sparks from individual spark plugs can affect vehicle performance, leading to low idle speed. Timely cleaning or replacement of spark plugs is advised. 3. Fuel system blockages, such as clogged fuel injectors, or faulty intake pipes: When the fuel injectors are clogged, the vehicle may experience poor fuel pressure and inadequate fuel atomization, resulting in unstable or low idle speed. 4. Malfunctioning sensors: If the vehicle's sensors fail, the correct air-fuel ratio cannot be maintained. Common issues include faulty coolant temperature sensors, oxygen sensors, or throttle position sensors, leading to high fuel consumption and low idle speed.
17
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.