Where to Park on a Slope?

1 Answers
LaMary
07/30/25 9:22am
When parking on a slope, the front wheels of the car should be positioned just at the front edge of the positioning fine line, and the front bumper should be directly above the designated thick line. Below are detailed instructions for parking on a slope: 1. Concept: Parking on a slope assesses a driver's ability to maneuver a vehicle on an incline, accurately judge the vehicle's position, and correctly use the brake, gear, and clutch to meet the requirements of stopping and starting on an uphill section. 2. Test Requirements: The vehicle must be parked at a fixed location on a slope with a gradient of ≥10% and a length of ≥30 meters. 3. Precautions: It's essential to master the clutch's contact point. When starting, avoid stomping on the clutch pedal. If the engine stalls during startup, the driver must immediately restart the engine and complete the start within 30 seconds.
Was this review help?
3
1
Share
More Forum Discussions

What is the wading depth of the Model Y?

The maximum wading depth is approximately 138mm. Here are the specific details: 1. Wading capability: It has mild wading ability, with the wading depth measured at the midline of the wheel rim. The high-voltage battery pack does not have a ventilation valve and has undergone precise testing before leaving the factory. The overall powertrain has good sealing, but this does not mean Tesla is an amphibious vehicle. Avoid driving through deep water areas. 2. Wading fault handling: Tesla can drive safely in heavy rain. When passing through dangerous wading depths, the high-voltage battery pack may malfunction when submerged. Whether it can completely prevent electric leakage remains to be examined. In case of a malfunction, contact after-sales rescue immediately and conduct a comprehensive inspection of the powertrain. 3. Wading advice: When passing through waterlogged areas, pay special attention to whether the water depth exceeds the midline of the wheel rim. Exceeding the midline indicates a dangerous area. If you cannot turn around or detour, maintain low gear and drive at a low speed. If any abnormality occurs during driving, go to a 4S shop for inspection immediately.
20
5
Share

Can a car that uses 92 octane gasoline also use 95 octane gasoline?

A car that uses 92 octane gasoline can also use 95 octane gasoline, but it is not recommended for long-term use. Engines with a compression ratio between 8.5 and 9.5 typically use 92 octane gasoline, while engines with a compression ratio greater than 9.5 usually use 95 octane gasoline. Occasional use once or twice will not have a significant impact. Differences between 92 and 95 octane gasoline: Compression ratio differences: Generally, cars with a compression ratio between 8.5 and 9.5 should use 92 octane gasoline, while cars with a compression ratio greater than 9.5 should use 95 octane gasoline. Octane rating differences: 92 octane gasoline has a lower octane rating than 95 octane gasoline. Specifically, 92 octane gasoline contains 92% isooctane, while 95 octane gasoline has an octane rating of 95%. Price differences: 92 octane gasoline is cheaper per unit than 95 octane gasoline. Gasoline grade selection: Common gasoline grades in China mainly include 92 octane and 95 octane. The gasoline grade indicates the octane rating of the gasoline, with higher octane ratings providing better anti-knock performance. Diesel grades are different from gasoline, as diesel grades represent the freezing point. Refueling precautions: Try not to wait until the fuel warning light comes on before refueling. The fuel pump is located inside the fuel tank and operates at a high temperature when continuously working. Being immersed in fuel helps to effectively cool it down. When the fuel warning light comes on, it means the fuel level is below the fuel pump. If you always wait for the light to come on before refueling, it will shorten the lifespan of the fuel pump. Additionally, having too little fuel or running out of fuel can potentially burn out the fuel pump. If the car has been driven over 30,000 kilometers, extra caution is needed. When the fuel level is too low, the fuel pump may draw in sediment from the bottom of the tank, which can block the fuel pump or obstruct the fuel line.
1
1
Share

Can Red Antifreeze Be Mixed with Different Brands?

Red antifreeze cannot be mixed with different brands. It is essential to use the same brand of antifreeze. Different brands of antifreeze may have varying production formulas, and mixing them can lead to chemical reactions between multiple additives, potentially rendering the additives ineffective. Methods for selecting antifreeze: The basic indicators of antifreeze are its freezing point and boiling point. The market offers antifreeze with freezing points such as -15°C, -25°C, -30°C, and -40°C. Generally, it is advisable to choose an antifreeze with a freezing point at least 10°C lower than the lowest temperature in your region. Methods to determine if antifreeze is low: Observe the antifreeze warning light on the dashboard. If it lights up, it likely indicates low antifreeze levels, though it could also be due to excessively high engine temperatures. Check the antifreeze reservoir. If the fluid level is below the minimum mark (MIN), do not continue driving; promptly add antifreeze. Inspect the water level scale on the antifreeze tank. Normal antifreeze levels should be between the maximum and minimum marks. If the antifreeze is below the minimum mark, it indicates a deficiency.
16
1
Share

What does motor vehicle inspection include?

Motor vehicle driver's license inspection includes the following: 1. Inspection content: Road traffic safety violations, accident handling status; physical condition; road traffic violation points and participation in study and testing after accumulating 12 points. Drivers whose licenses have been revoked must participate in no less than three hours of study on road traffic safety laws and regulations, safe and civilized driving, emergency handling, and receive case-based traffic accident warning education during inspection. 2. Failed inspection: Unresolved traffic violations or accidents, physical conditions not meeting driving license requirements, and failure to participate in required study, education, and testing will result in inspection failure.
10
2
Share

What are the types of engine oil?

Engine oil is divided into three categories: conventional mineral oil, semi-synthetic oil, and full synthetic oil. The following are the relevant introductions: 1. Mineral oil: Mineral oil is a commonly used lubricant in the market. It is derived from the residual base oil after the refining process of petroleum, where useful substances like gasoline and aviation oil are distilled out. Essentially, it utilizes the inferior components of crude oil. 2. Semi-synthetic oil: Semi-synthetic oil is produced using semi-synthetic base oil, which is purified from mineral oil through hydrocracking technology. It is a mixture of mineral oil and full synthetic oil in a ratio of 4:6. The purity of semi-synthetic oil is very close to that of full synthetic oil, but its cost is slightly higher than mineral oil, making it an ideal transitional product from mineral oil to synthetic oil. 3. Full synthetic oil: Full synthetic oil is the highest grade of engine oil. It is derived from ethylene and propylene dispersed from natural gas or gas in crude oil, which then undergoes complex chemical reactions such as polymerization and catalysis to form a lubricating fluid composed of large molecules.
5
1
Share

What are the solutions for car door squeaking?

Solutions for car door squeaking: 1. Lubricate the hinges: The door and body are connected by hinges, similar to a household door. It's normal for hinges to squeak over time. To ensure smooth and quiet operation, apply lubricant every 2-3 months for maintenance. 2. Clean the door limiter: Another component connecting the door and body is the door limiter. Open the door to its maximum angle, clean the grease and dirt from the limiter arm, pin shaft, and connecting bracket surfaces, then apply an appropriate amount of grease to the upper and lower surfaces of the arm. 3. Check for seal aging: If the car has been used for a while, inspect whether the door seals have aged. Since seals are made of rubber, they can deteriorate and crack over time, leading to noticeable wind noise and friction sounds. If the seals are aged or damaged, it's recommended to replace them directly. Additionally, regularly clean dust and rainwater from the seal gaps to prevent aging.
11
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.