Where to Install the Long and Short Windshield Wipers?

1 Answers
ReeseDella
07/25/25 8:00am
Generally, the long wiper is installed on the driver's side, and the short wiper is installed on the passenger side. Below are the specific details about windshield wipers: 1. Design Principle: The reason for having one long and one short wiper is to ensure the driver's visibility remains unobstructed. In some car models, the wipers on both the driver and passenger sides are of the same length, primarily because the curvature of the windshield is relatively large. Using wipers of unequal length might result in missed spots during rain clearing. Some car models also feature a wiper on the rear windshield. 2. Working Modes: Windshield wipers have two working modes: one is the synchronized left-right mode, and the other is the cross-wiping mode. The synchronized left-right mode is more common in most car models, as it has a lower installation cost. The coverage rate of synchronized wiping is approximately 80%, while the cross-wiping mode offers a coverage rate of about 90%.
Was this review help?
9
1
Share
More Forum Discussions

How to use the cruise control on the Baojun 560?

Usage method of the cruise control on the Baojun 560: 1. Press the power button to turn on the system, at which point the cruise control indicator on the dashboard will light up; 2. Accelerate to the desired speed and press the set button, then you can release the accelerator pedal, and the speed will be fixed at the current level; 3. Use the "res+" and "set-" buttons to fine-tune the speed; 4. Methods to deactivate cruise control: step on the brake, press the cancel button, or press the power button. Taking the 2017 Baojun 560 iAMT Comfort model as an example: it is a compact SUV launched by SAIC-GM-Wuling, with dimensions of 4620mm in length, 1820mm in width, and 1750mm in height, and a wheelbase of 2750mm. It is equipped with a 1.8L naturally aspirated engine, delivering a maximum power of 101kw and a maximum torque of 186nm, paired with a 5-speed mechanical automatic transmission.
8
5
Share

What Causes Audi Auto Start-Stop Malfunction?

Generally, Audis have the start-stop system enabled by default. If it suddenly stops working, it might be due to accidentally pressing the auto start-stop button on the car, which turns the system off. 1. Check if the system is turned off. 2. Inspect whether the start-stop button switch is damaged. Below are the basic conditions for using the auto start-stop system: 1. The driver must operate the clutch, shift gears, and brake according to the conditions; 2. The engine speed must be below 1200r/min; 3. The coolant temperature must be between 25°C and 100°C; 4. The brake vacuum must be above 550mbar; 5. The battery temperature must be greater than or equal to -1°C but less than 55°C; 6. The difference between the set air conditioning temperature and the actual outlet temperature must be below 8°C.
6
0
Share

What are the correct operating steps for the Audi A4 automatic transmission?

Audi A4 automatic transmission correct operating steps: 1. Start the car with the gear lever in the P (or N) position; 2. When moving the gear to D (drive) or R (reverse), you must press the brake pedal; 3. After the gear is moved to the desired position, release the brake pedal, and the car will start moving forward. Begin accelerating to drive; 4. To stop, simply press the brake pedal to halt the car. For short stops, you can directly press the brake pedal. For slightly longer stops, you can shift to the N position, release the brake pedal, and use the handbrake to park. Taking the Audi A4 (imported) 2021 Avant Pioneer 40TFSI Fashion Dynamic model as an example: it is a mid-size car launched by Audi (imported), with a length, width, and height of 4762mm, 1847mm, and 1436mm respectively, and a wheelbase of 2825mm. It is equipped with a 2.0T turbocharged engine, with a maximum power of 150kw and a maximum torque of 320nm, matched with a 7-speed dual-clutch transmission.
1
4
Share

What is the difference between R16 and R17 car tires?

The differences between R16 and R17 car tires are as follows: 1. Size difference: R16 tires indicate that they are suitable for 16-inch rims, which are relatively smaller in size; while R17 tires indicate that they are suitable for 17-inch rims, which are relatively larger compared to R16. 2. Aspect ratio difference: Generally, the larger the size of the car tire, the lower the aspect ratio, and tires with lower aspect ratios have stronger capabilities in reflecting road information and handling lateral support during driving. Smaller car tires have higher aspect ratios, and tires with higher aspect ratios provide better comfort for the driver, but their ability to reflect road information and lateral support is relatively weaker. 3. Visual difference: The larger the tire size, the stronger the visual impact, making the car appear more imposing; while smaller tire sizes make the wheels appear less impressive, and the overall vehicle's demeanor may seem slightly lacking. The outer diameter of the tires on the same car is very similar, so the same car model can use either R16 or R17. The difference between these two rim sizes is reflected in the aspect ratio, meaning that from the side, the thickness of the tires is different. 4. Driving experience difference: R16 tires have thicker sidewalls, providing better cushioning on bumpy roads. R17 tires offer more responsive handling at high speeds, but the road feel is stronger on bumpy surfaces, with weaker cushioning capabilities.
16
5
Share

What Does the Clutch Pedal Mean?

Clutch pedal refers to the control device of the clutch assembly in a manual transmission car, serving as the 'human-machine' interaction part between the car and the driver. Relevant introduction about the clutch is as follows: 1. The clutch consists of friction plates, spring plates, pressure plates, and a power output shaft. It is arranged between the engine and the transmission, used to transmit the torque stored on the engine flywheel to the transmission, ensuring the vehicle delivers appropriate driving force and torque to the drive wheels under different driving conditions, belonging to the powertrain category. During semi-engagement, the clutch allows a speed difference between the power input end and the power output end, which means it transmits an appropriate amount of power through this speed difference. 2. If the clutch and throttle are not well-coordinated when starting the car, the engine may stall or the car may tremble during startup. The engine power is transmitted to the wheels through the clutch, with only about 1cm of reaction distance on the clutch pedal. Therefore, after depressing the clutch pedal and engaging the gear, when lifting the clutch pedal until the clutch friction plates start to contact each other, the foot should pause at this position while simultaneously pressing the throttle. Only after the clutch plates are fully engaged should the clutch pedal be completely lifted. This is the so-called 'two fast, two slow, one pause' method, meaning the pedal lifting speed is slightly faster at both ends, slower in the middle, with a pause in between.
2
1
Share

What are the penalties for speeding in urban areas?

Speeding penalties: No penalty for exceeding the speed limit by less than 10%; a fine and 3 demerit points for exceeding the speed limit by 10% to 20%. Below is expanded information on the dangers of speeding: 1. Decreased driver reaction ability, leading to fatigue and misoperation: Due to high speed, the driver has less time to observe and react to the surrounding environment, making it difficult to detect dangerous situations and take timely emergency measures. Additionally, as speed increases, the driver's vision deteriorates, often focusing ahead while neglecting the surroundings. Experiments show that as speed increases, the driver's gaze becomes more fixed on distant points, the field of vision narrows, and vision becomes more blurred. 2. Increased reaction distance: As speed increases, the reaction time of both the driver and the vehicle lengthens. When a vehicle travels at 60km/h (16.6m/s), the average reaction time from recognizing danger to applying the brakes is about 0.7 to 1 second, with a reaction distance of approximately 17 meters (free travel distance). At 120km/h, the reaction distance increases to about 39 meters (free travel distance). 3. Extended braking distance: Higher speeds reduce the vehicle's braking performance, lower the friction coefficient, and extend the braking distance, making it harder to stop the vehicle promptly when needed. The braking distance is proportional to the square of the vehicle's speed; doubling the speed quadruples the braking distance. Additionally, the centrifugal force during turns increases.
15
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.