···
Log in / Register

Where to Insert the USB Flash Drive in Haval F7?

1 Answers
SanCollin
07/30/25 2:43am
The USB flash drive in Haval F7 is inserted in the storage compartment below the gear lever. The interior of Haval F7 adopts the Haval family's wrap-around cockpit design, especially the center console that significantly tilts towards the driver. The use of a full LCD instrument panel, a large central control LCD screen, and a through-type air conditioning outlet enhances the technological atmosphere inside the car. The dimensions of Haval F7 are 4620mm in length, 1846mm in width, and 1690mm in height, with a wheelbase of 2725mm. The exterior of Haval F7 follows the space technology aesthetic design language, with the front grille upgraded to a shield style and a new golden color added. The aggressive hexagonal matte border of the front grille, combined with the honeycomb mesh, gives the entire front face a very concise, sharp, and technology-filled appearance. The full LED rear combination headlights echo the front lights, and the tank track-style lower protective plates at the front and rear highlight the off-road elements of this urban SUV. The through-type tailgate trim integrates with the turn signals and reverse lights, creating a stronger sense of unity.
Was this review help?
18
1
Share
More Forum Discussions

What is the purpose of car ABS?

The purpose of car ABS is to continuously switch between the critical point of tire sliding and rolling, effectively shortening the braking distance and preventing the vehicle from skidding during emergency braking. The working principle process of car ABS is: 1. The ABS system monitors the rotation speed of the four wheels. When a wheel is about to lock, the system releases the brake of that specific wheel, allowing it to resume rotation; 2. After the wheel is about to resume rotation, braking hydraulic pressure is applied to that wheel; 3. When the wheel is about to lock again, the system releases the brake of that specific wheel; 4. The system repeats the above process multiple times within one second to maximize the potential of the brakes and ensure the stability and normal operation of the vehicle.
17
5
Share

What Causes the BMW 740 to Shake During Rapid Acceleration?

Reasons for the BMW 740 shaking during rapid acceleration: Severe Engine Carbon Buildup: The most common cause of car shaking is a dirty throttle body or excessive carbon buildup in the fuel injectors. When there is too much carbon buildup inside the engine, the gasoline sprayed by the cold start injector is largely absorbed by the carbon deposits, resulting in an overly lean air-fuel mixture during cold starts and making it difficult to start. In this situation, the car will only start easily once the carbon deposits have absorbed enough gasoline to reach saturation. After starting, the gasoline adsorbed on the carbon deposits is then drawn into the combustion chamber by the engine's vacuum suction, causing the air-fuel mixture to become too rich. The engine's combustible mixture alternates between being too lean and too rich, leading to idle shaking after a cold start. Ignition System Issues: Check the condition of the spark plugs, high-voltage wires, and ignition coils. Poor performance in the ignition system or inadequate spark plug firing can also cause this type of problem. Unstable Fuel Pressure: If you have already cleaned the engine carbon deposits, throttle body, replaced the fuel gasket and spark plugs, but still notice the car shaking at idle, it is recommended to visit a 4S shop to check whether the fuel supply pressure and intake pressure sensor are functioning properly. Abnormal fuel pump pressure or incorrect readings and poor performance of the intake pressure sensor can also cause the car to shake.
19
4
Share

Does the replacement of the front windshield for Skoda Octavia require an original factory part?

Skoda Octavia front windshield replacement does not require an original factory part. Windshield: The function of the windshield is to provide a survival space for passengers. When impacted and shattered, the glass breaks into small pieces with blunt edges, minimizing harm to occupants. Currently, most car front windshields are made of laminated tempered glass or zoned tempered glass, which can withstand strong impacts. Zoned tempered glass is a new type of tempered glass that undergoes special treatment to maintain a certain level of clarity when cracked upon impact, ensuring the driver's field of vision remains unaffected. Precautions for windshield replacement: Do not wash the car for three days after replacing the windshield. Remove the tape securing the windshield position after three days. Avoid driving on excessively bumpy roads, sudden braking, and rapid acceleration to prevent windshield displacement. Do not insert parking permits or other cards into the gap between the front windshield and the dashboard. Avoid driving on highways and keep the maximum speed below 80 km/h. Do not apply window tinting within seven days. After rear windshield replacement, do not open the windows while driving for three days to prevent displacement caused by wind pressure.
14
1
Share

How to Set the Tire Pressure for Buick Verano?

Buick Verano tire pressure setting method: Select the tire pressure mode on the dashboard, press and hold the checkmark button to enter the learning mode, then inflate and deflate the tires in sequence to complete the setting. The dimensions of the Buick Verano are: length 4723mm, width 1802mm, height 1476mm, with a wheelbase of 2700mm. The Buick Verano is equipped with a 1.3L three-cylinder turbocharged engine, delivering a maximum horsepower of 165PS, maximum torque of 240Nm, and maximum power of 121kW. The maximum power speed is 5600rpm, and the maximum torque speed ranges from 1500 to 4000rpm. It is paired with a CVT continuously variable transmission.
2
4
Share

What Causes Manual Transmission Shudder During Startup?

Manual transmission shudder during startup is caused by: 1. Insufficient engine power; 2. Loose connection between the transmission and chassis; 3. Uneven engagement of the clutch pressure plate and clutch friction disc. The correct method for starting a manual transmission is: 1. Fully depress the clutch; 2. Shift into first gear; 3. Turn on the left turn signal; 4. Sound the horn as a reminder; 5. Release the handbrake; 6. Gently lift the clutch with the left foot; 7. As the vehicle begins to move, stabilize the clutch with the left foot, avoiding any pressing or lifting to prevent stalling. Hold steady for 3 seconds, then slowly release the clutch while gently pressing the accelerator with the right foot. Gradually release the accelerator, fully depress the clutch to shift to second gear, and repeat the process to shift to third gear, ensuring a smooth and stable vehicle startup.
19
1
Share

What engine is used in the Toyota RAV4?

The Toyota RAV4 is equipped with 2.0L and 2.5L naturally aspirated engines. The 2.0L engine has a maximum power output of 126kW and a maximum torque of 209Nm. In terms of the transmission system, the 2.0L engine is paired with a CVT continuously variable transmission. The 2.5L engine delivers a maximum power of 178kW and is matched with an eCVT continuously variable transmission. The Toyota RAV4 has dimensions of 4570mm in length, 1845mm in width, and 1715mm in height, with a wheelbase of 2660mm. It has a minimum ground clearance of 195mm and a curb weight of 1420kg.
5
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.