Where to Insert the Memory Card for the Mercedes-Benz GLB Dash Cam?

1 Answers
SanFinn
07/29/25 5:48pm
Mercedes-Benz GLB dash cam memory card slot is usually located on the side of the device. The exact position may vary depending on the product model and type. For rearview mirror dash cams, the memory card slot is typically on the top of the device, while for hidden or compact dash cams, it is usually on either side of the device. Below is some related information about dash cams: 1. A dash cam is a device that records images, sounds, and other relevant information during vehicle operation. After installation, it can record the entire driving process in video and audio, providing evidence in case of traffic accidents. 2. Different dash cam products have varying appearances, but they generally consist of the following basic components: Host unit: includes a microprocessor, data storage, real-time clock, display, lens module, operation keys, printer, data communication interface, etc. If the host unit does not include a display or printer, it should have corresponding data display and print output interfaces.
Was this review help?
1
3
Share
More Forum Discussions

What is the mirror on the windshield called?

The mirror on the windshield is called the interior rearview mirror. Function: It is used to observe the rear road conditions when the car is reversing and to observe the surrounding conditions of the vehicle while driving. It is used to observe the rear road conditions when the car is reversing and to observe the surrounding conditions of the vehicle while driving. Material: Domestic car rearview mirrors generally use silver and aluminum as the reflective coating materials, and some use chromium. Currently, abroad, chromium mirrors have replaced silver and aluminum mirrors for car rearview mirrors. Maintenance: Regularly purchase anti-fog agents to remove water from the rearview mirror. If visibility is obstructed by rain while driving, it may lead to accidents.
18
1
Share

Does the Jiapeng 48q motorcycle require license plate registration?

Jiapeng 48q motorcycle requires license plate registration. According to regulations, 48CC two-wheeled light motorcycles need to be registered with blue light motorcycle license plates, and drivers must obtain at least an F-class driver's license to legally ride on the road. Since these so-called 48CC motorcycles are actually 50CC, and some even use 100 or 125 engines with falsely labeled displacement, some regions require them to be registered with yellow license plates and require an E-class license for road use. Light motorcycles require license plate registration: Motorcycles are classified as motor vehicles. According to the Road Traffic Safety Law, motor vehicles must be registered before they can be driven on the road. Therefore, motorcycles also need to be registered. 48CC motorcycles fall under the category of light motorcycles (with engine displacement above 36cc (exclusive) and up to 50cc (inclusive), requiring blue license plates), and drivers must hold an F-class license to operate them. Requirements for applying for motorcycle license plates: To apply for a light motorcycle license plate, applicants must provide the light motorcycle's certificate of conformity, purchase receipt, third-party liability insurance certificate, and unit certification to the local public security authority for processing. After passing inspection, the light motorcycle license plate and registration certificate will be issued.
10
3
Share

What Causes the Automatic Headlights to Fail After Battery Replacement?

The failure of automatic headlights after battery replacement may be due to power interruption during the replacement process, leading to the loss of headlight-related functions. For high-end vehicles, it is necessary to perform a power-continuous battery replacement. If the vehicle's electrical network is interrupted during the replacement, various control modules may lose data and functionality. Solution: Use an automotive diagnostic tool to retrieve fault codes and check if the functionality can be restored through initialization. Solution: Inspect the power supply and grounding of the headlight control module to ensure they are functioning properly. Solution: Measure the headlight sensor switch to check if it is damaged.
1
2
Share

Can Beginners Drive on the Duku Highway?

Beginners can drive on the Duku Highway. Restrictions on vehicle types: All vehicles with seven seats or fewer are allowed on the entire Duku Highway. The following vehicles are prohibited: passenger vehicles with more than seven seats, trucks with a rated load capacity of more than 5 tons, hazardous chemical transport vehicles, trailers (full trailers, center-axle trailers, semi-trailers), three-wheeled vehicles, low-speed trucks, tractors, and agricultural machinery. Exceptions include highway maintenance vehicles, military and police vehicles on duty, emergency rescue vehicles, and engineering rescue vehicles. Follow the road signs: "New drivers" are generally inexperienced, and their speed tends to increase unconsciously while driving. Combined with a lack of experience in navigating curves, it is essential to pay attention to road traffic signs, adhere to speed limits, and slow down when seeing warning signs for curves to avoid accidents caused by excessive speed.
19
4
Share

Why Does a New Car Make a Clicking Sound?

There are reasons why a new car makes a clicking sound. Quality Factors: Depending on the car model, the noise in a new car may be due to quality issues, assembly process problems, material defects, or mechanical failures. Human Factors: Improper operation, such as inaccurate gear shifting or incomplete clutch engagement, can cause significant noise while driving a new car. Internal Vehicle Factors: The noise in a new car might be due to issues with the engine mounts; if the oil dipstick is not tightened after checking the engine oil, or if the coolant cap is not properly secured after refilling, it can also cause noise. Fuel system malfunctions, such as water molecules seeping into the fuel system due to prolonged outdoor parking, can lead to noise. Solution: If there is noise from the car doors, it is best to have it inspected at a 4S shop to determine whether it is a quality issue or an engine malfunction.
13
2
Share

Does the new Jetta have a rear anti-collision beam?

The new Jetta does not have a rear anti-collision beam, but it is equipped with a front anti-collision beam. The function of the rear bumper is to absorb impact force. For minor collisions, the rear bumper is designed to be sacrificed to ensure the integrity of the vehicle's chassis and prevent deformation. The bumper covers most of the front and rear areas of the car, primarily absorbing and mitigating external impacts, serving as a safety device to protect the front and rear parts of the vehicle body. The Jetta lineup includes models such as the VS3, VS5, and VS7. Among them, the Jetta VS5 has a body length, width, and height of 4419mm, 1841mm, and 1616mm respectively, with a wheelbase of 2630mm. It is powered by a 1.4T turbocharged engine paired with a 5-speed manual transmission. This engine delivers a maximum power of 110kW and a maximum torque of 250Nm.
8
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.