Where to Insert the Key When the Lavida's One-Button Start Has No Power?

3 Answers
LeFrancisco
07/29/25 11:29am
When the Volkswagen Lavida's one-button start key runs out of power, after opening the car door, place the smart key into the storage box behind the handbrake to enable one-button start. Definition of Car One-Button Start: It is a part of smart cars, a button device designed to simplify the ignition process, and it can also be used to turn off the engine. The car one-button start can be modified at the original key lock position or installed as an independent panel. Functions of One-Button Start: Automatic unlocking. Automatic locking. Automatic window closing. Automatic anti-theft. One-button start. One-button engine shut-off. Automatic locking before driving. Automatic unlocking when parking and turning off the engine.
Was this review help?
19
4
Share
TaliaFitz
08/13/25 7:12pm
Having driven for a lifetime, I once encountered a situation where my Lavida's push-to-start system ran out of battery. Actually, the keyhole is hidden in a small groove under the lower trim panel on the right side of the steering wheel. You can pry open the plastic cover with the end of the key and insert it to start the car—just be careful not to force it and damage the cover. There was a time when I returned from a business trip to find my car dead, and I was frantic. But once I found the keyhole and inserted the key, it worked perfectly. I think it's a pretty reliable design. I recommend everyone regularly check their battery status and keep an emergency jump starter in the car just in case, especially when driving in suburban areas or on long trips—this little trick can be a lifesaver. After all, safety comes first. Also, always carry your key with you and don’t forget to keep a spare in your bag.
Was this review help?
13
0
Share
Expand All
DelHailey
10/08/25 4:38am
I haven't been driving for long. Last time when the Lavida's one-button start malfunctioned, I panicked. A friend told me there's a protective panel in front of the steering wheel that can be pried open to insert the key for starting. I tried it myself, felt a hard spot, used the key to pop open the cover and insert it - it really worked! Learned quickly but also had an embarrassing moment. Now I know cars are designed this way for emergencies, with the keyhole hidden behind the inner panel. When the battery dies, solve it quickly - don't wait until midnight to get stuck roadside needing help. I always keep a small manual in my bag with the steps written down, simple yet practical.
Was this review help?
11
5
Share
Expand All
More Forum Discussions

How Long Does a BMW System Upgrade Take?

BMW system upgrades typically take around 2 hours. A system upgrade involves programming the vehicle, and the modules that require programming cannot be manually selected. Here is a detailed introduction about BMW cars: 1. Overview: BMW cars refer to vehicles produced by Bayerische Motoren Werke AG (abbreviated as BMW). The main series models include the 1, 2, 3, 4, 5, 6, 7, and 8 series. 2. Logo: The logo features a double-circle design with the letters "BMW" inscribed above the double circles. The entire emblem resembles the blue sky, white clouds, and a continuously rotating propeller, symbolizing BMW's long history and the company's consistent purpose and goals.
15
4
Share

What are the differences between Polo GTI and Golf GTI?

1. Different appearance: The Polo GTI is relatively plain, featuring only the GTI-specific alloy wheels and the GTI badges on the front grille and rear trunk. The Golf GTI comes with a specially designed aerodynamic kit from Volkswagen, giving it a commanding and stylish yet steady presence. 2. Different space: The Polo is an A0-class sedan with a relatively cramped interior, making it less suitable for larger individuals. The Golf is a standard A-class sedan that can meet the needs of most people.
5
3
Share

What is the reason for the broken spring of the Bora shock absorber?

Bora shock absorber spring breakage is caused by poor linkage coordination. The following are methods to check whether the shock absorber is damaged: 1. External surface: Generally, the external surface of the shock absorber is dry. If oil seeps out or hydraulic oil leaks from the piston rod, the shock absorber is damaged. 2. Rough roads: When driving on rough roads or speed bumps, if abnormal noises occur from the wheels, the shock absorber is damaged. Below are extended notes on Bora car first maintenance considerations: 1. Appointment: Make an appointment in advance. 2. Essentials: Bring necessary items such as the maintenance manual and vehicle license. 3. Records: Record any faults or questions encountered during daily driving and inform the staff during the first maintenance registration.
12
1
Share

What is the working principle of ABS?

ABS system, also known as the Anti-lock Braking System, operates on the following principle: During braking, ABS monitors speed signals from each wheel speed sensor. It closes the normally open input solenoid valve for wheels that begin to lock, maintaining constant braking force. If the wheel continues to lock, it then opens the normally closed output solenoid valve. This keeps the braking state at its optimal point, ensuring the best braking performance and maximum driving safety. ABS, short for Anti-lock Braking System, functions by automatically controlling the braking force during vehicle deceleration to prevent wheel lock-up. It maintains the wheels in a rolling-sliding state (with a slip ratio of about 20%), thereby maximizing the adhesion between the tires and the road surface. The ABS system primarily consists of four components: wheel speed sensors, electronic control unit (ECU), hydraulic unit, and ABS warning light. The wheel speed sensors detect the motion state of each wheel, generating sinusoidal AC electronic pulse signals. These signals are then processed by a modulator, converted into digital signals, and transmitted to the electronic control unit. The central electronic control unit (ECU) receives input signals from the wheel speed sensors. Using these parameters, it calculates wheel speed, vehicle speed, and slip ratio. Based on the slip ratio, it determines wheel status and issues control commands to the hydraulic unit. The hydraulic unit adjusts brake line pressure according to control commands, with the regulation process including pressure maintenance, pressure increase, and pressure reduction. The ABS warning light alerts the driver to potential system malfunctions. If the ABS warning light illuminates, it is advised not to continue driving. An illuminated ABS light indicates a malfunction in the vehicle's anti-lock braking system. During emergency braking, locked wheels could cause the vehicle to skid uncontrollably, preventing the driver from decelerating or adjusting the vehicle's trajectory, which poses significant safety risks.
6
1
Share

How Many Hours Are Required for Driver's License Check-in?

Driver's license check-in hours are as follows: 1. Subject 1: 12 credit hours. 2. Subject 2: 14 to 16 credit hours, including 2 hours of theory and 12 to 14 hours of practical vehicle operation. 3. Subject 3: 24 credit hours, including 16 hours of theory and 24 hours of practical vehicle operation. 4. The daily study time for the driver's license must not exceed 4 credit hours. Additional information: When students practice in the car, they must fingerprint on the check-in calculator installed in the training vehicle and swipe the time card. After finishing the practice, they must swipe the card again. The card will record the student's driving practice time. Only when the required hours are met can the student schedule the exam.
13
5
Share

Differences Between Volkswagen Talagon and Teramont?

The main differences between Volkswagen Talagon and Teramont are as follows: Launch time differs: Teramont debuted in March 2017, while Talagon was officially launched in June 2021. Price varies:
5
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.