Where to insert a USB drive for music playback in Volkswagen Tharu?

First Maintenance: Fully Synthetic or Semi-Synthetic?

First Maintenance: Fully Synthetic or Semi-Synthetic? The choice between fully synthetic or semi-synthetic oil for the first maintenance can be decided based on personal needs. The specific details are as follows: 1. Based on engine displacement: For a 1.5L engine, use fully synthetic oil for the first maintenance, then switch to semi-synthetic oil. Using semi-synthetic oil is not good for the engine as it can cause increased engine wear and noise. 2. Based on usage: If you frequently drive at high speeds (above 160 km/h), with high RPMs and frequent vehicle use, it's best to use fully synthetic oil, which is heat-resistant and does not degrade. Information about the first maintenance is as follows: 1. First maintenance: It is the first mandatory maintenance after the new car leaves the factory. In China, except for imported models, domestic and joint-venture models generally offer free first maintenance. 2. First maintenance time: Different brands and models may have different requirements, but most require the first maintenance to be done within 3,000 to 5,000 kilometers or three to six months. When choosing the time and mileage for the first maintenance, try not to exceed the recommended limits.

12

4

Share

How to Open the Trunk of an Old Bora?

Press and hold the trunk button on the remote key to open the trunk of an old Bora. Below is an introduction to the trunk: 1. Overview: The trunk can be opened or closed electrically or via remote control. To open the trunk, simply press the button inside the car or on the remote key, and the trunk will open automatically. To close the trunk, press the close button inside the trunk, the close button inside the car, or the remote key, and the trunk will close automatically. 2. Structure: The basic structure consists of two core drive rods. The drive rod, through the main shaft driver, is composed of an inner tube and an outer tube. The motor and gear inside the inner tube drive a threaded main shaft that moves along a threaded nut fixed to the inner side of the outer tube. The electric strut uses an electric main shaft located inside the motor within the strut to open and close the trunk lid, with springs also assisting in the opening operation. 3. Functions: Manual and automatic opening: The driver or passenger can open or close the trunk by pressing the trunk switch inside the vehicle, using the remote car key, or by sensing with a hand or any object in the corresponding area of the trunk, making it easy and quick to store items in the vehicle. Intelligent anti-pinch function: When closing the trunk, sensors detect obstacles. If the electric trunk encounters an obstacle during opening or closing, it will move in the opposite direction, effectively preventing injuries to children or damage to the vehicle. Emergency lock function: In case of an emergency requiring immediate closure of the trunk, the trunk can be stopped at any time during opening or closing by using the remote key or the trunk switch inside the vehicle, allowing for flexible control. Height memory function: The opening height of the trunk can be adjusted. The owner can set the final opening height of the trunk via manual control buttons according to their usage habits. Simply press the trunk switch to open it to the desired height, then lightly press the switch for more than 5 seconds until a beep is heard, and the trunk opening height setting is complete. The next time the trunk is opened, it will automatically rise to the set height.

17

2

Share

Does wheel hub color change require registration?

According to the "Motor Vehicle Inspection Work Regulations," changing the color of wheel hubs does not require registration, but the size of the wheel hubs must not be altered. For changes to the vehicle body color, Article 6 of Chapter 2 of the "Road Traffic Safety Law" stipulates that if the color change area does not exceed 30% of the vehicle's surface, no change registration is required. Conversely, if it exceeds 30%, registration is required, and the change must be recorded within 10 days after the color alteration. Precautions for vehicle color change: Before changing the color of a motor vehicle, it is necessary to consult the local vehicle management office where the vehicle is registered to confirm whether the region permits color changes. If the region does not support this practice, registration procedures cannot be completed after the change, and the vehicle must be restored to its original color. Documents required for applying to change the vehicle body color: "Motor Vehicle Change Registration Application Form." Identity proof of the vehicle owner and agent. Motor vehicle registration certificate. Motor vehicle driving license. Additionally, according to the "Motor Vehicle Registration Regulations," owners are no longer required to apply in advance to the vehicle management office. They can first change the vehicle color, install body kits, replace the engine, etc., and then apply for change registration with the vehicle management office. According to Article 10, registered motor vehicles must apply for change registration under the following circumstances: Change of body color. Replacement of the engine. Replacement of the body or frame. Replacement of the entire vehicle due to quality issues. Change of use nature, such as converting a commercial vehicle to non-commercial or vice versa. Change of the vehicle owner's residence in or out of the jurisdiction of the vehicle management office. Furthermore, according to Article 15 of the "Road Traffic Safety Law of the People's Republic of China": Police cars, fire trucks, ambulances, and engineering rescue vehicles must be painted with designated patterns and equipped with alarms and warning lights as required. Other motor vehicles are prohibited from using similar patterns, alarms, or warning lights. Article 56 of the "Motor Vehicle Registration Regulations" states that if the body color is changed without following the required registration procedures, the public security traffic management department may issue a warning or impose a fine. The vehicle may also be impounded and required to revert to its original color.

2

1

Share

Does the 2021 Audi Q3 have a particulate filter?

The 2021 Audi Q3 2.0T models do not have a particulate filter, while the 1.4T models are equipped with one. The 2021 Audi Q3 lineup consists of 9 variants, all of which comply with the China VI emission standards. A particulate filter is a ceramic filter installed in the exhaust system of diesel engines, designed to capture particulate emissions before they are released into the atmosphere. It can reduce soot emissions from diesel engines by more than 90%, and the captured particulate matter is subsequently burned off during vehicle operation. How the particulate filter works: The diesel particulate filter is coated with metals such as platinum, rhodium, and palladium. The black smoke containing carbon particles emitted by the diesel engine enters the particulate filter through a dedicated pipe. Inside, a densely arranged bag-type filter captures the carbon particles on a metal fiber felt filter. When the accumulated particulate matter reaches a certain level, an automatic igniter at the end burns off the captured carbon particles, converting them into harmless carbon dioxide that is then released. To check if the 2021 Audi Q3 has a particulate filter, you can use the following three methods: 1. Refer to the and to see if the particulate filter function is mentioned. Additionally, carefully check the fault codes in the manual for any indicators related to the "particulate filter" warning light. 2. Check the label on the oil filler cap. If it clearly specifies 0W-20 grade oil, it indicates the presence of a particulate filter. 3. Inspect the exhaust pipe behind the catalytic converter for an additional cylindrical section. If present, that is the particulate filter.

4

1

Share

What are the methods to deal with fogging on the windshield?

Press the defogging button, turn on the air conditioning cooling (A/C) switch, set the temperature to the lowest, and turn on the external circulation to defog. Both cold and warm air can be used to defog the car windows, but warm air is slower than cold air. The most effective method is to use cold air, which blows dry cold air directly onto the glass, preventing water vapor from condensing on the glass and achieving the purpose of defogging. The method of using warm air to defog is the same as using cold air, but it should be noted that warm air should not be used on rainy days as it may initially worsen the fogging. When the car windows fog up, the external circulation should be turned on. The reasons for car window fogging: There is a certain temperature difference between the inside and outside of the car. If the temperatures inside and outside the car are different, the surface with the lower temperature will have a lower saturated vapor pressure than the surrounding environment, causing water vapor to gather on the glass surface and form tiny water droplets, resulting in fogging. Methods to defog car windows: Air conditioning cooling: Use the air conditioning's dehumidification function to reduce air humidity and remove fog. In summer, especially when multiple people enter the car and the air conditioning is not turned on in time, the exhaled air has high humidity, and the windshield will quickly fog up. At this time, you can turn on the air conditioning to blow cold air onto the windshield, using the dehumidification function to remove the fog quickly. If the humidity is too high and the air conditioning is not effective, you can slightly open a window to quickly reduce the humidity inside the car. Of course, combining this with the air conditioning will yield faster results. Air conditioning warm air: Use the method of reducing the temperature difference to remove fog. In winter, blowing warm air onto the glass can quickly raise the temperature of the windshield, reducing the temperature difference between the inside and outside surfaces of the window and preventing heavy fogging. However, it should be noted that the rear and side windows heat up more slowly, so it takes longer to remove all the fog. Whether the air conditioning is automatic or manual, turning it on helps with dehumidification. The temperature control should not be set to the coldest position, as this may cause the outer surface of the windshield to fog up over time. Applying anti-fog spray for prevention: Spray a small amount of anti-fog agent on the car windows and wipe it clean to remove dirt and stains. While polishing the glass, a thin transparent protective film is formed, effectively preventing water vapor from condensing on the glass and forming fog. This is especially useful in cold winters. Alternatives to anti-fog spray include dish soap, soapy water, glycerin, alcohol, or saline solution. After drying, wipe off any excess residue with a chamois or soft dry cloth to ensure the windows remain fog-free for several days. Opening windows for air circulation: If the fog inside the car is not too heavy, you can open the windows on both sides to create air circulation between the inside and outside of the car, reducing the temperature difference and allowing the fog to dissipate slowly. The principle of this method is the same as using cold air from the air conditioning. The downside of opening windows is obvious: it is not suitable during rain, snow, on highways, or when the fog is heavy. Rear window heating: Most cars have a rear window heating function, though the button location may vary. Turning on the rear window heating switch will remove the fog in about a minute. Turning on external circulation: On rainy days in spring or autumn, you can turn on the external circulation to blow air onto the windshield. Opening windows may not be suitable, and turning on the air conditioning may feel too cold. At this time, you can turn on the external circulation and adjust the air vent to blow onto the windshield, quickly lowering the temperature on the inner side of the windshield and making the fog disappear.

5

Share

What is the cancel button on a car?

On a car, the cancel button is used to deactivate the cruise control. The cruise control system, also known as speed control, automatic driving system, etc., will temporarily stop cruising when the cancel button is pressed during cruise operation, and the cruise set indicator light on the temperature gauge will turn off. The principle of cruise control is that the cruise control unit reads the pulse signal from the speed sensor and compares it with the set speed, then issues commands to the servo mechanism to adjust the throttle opening, increasing or decreasing it to maintain the set speed. This helps reduce driver fatigue, minimizes unnecessary speed variations, and saves fuel.

5

3

Share

Where to insert a USB drive for music playback in Volkswagen Tharu?

First Maintenance: Fully Synthetic or Semi-Synthetic?

How to Open the Trunk of an Old Bora?

Does wheel hub color change require registration?

Does the 2021 Audi Q3 have a particulate filter?

What are the methods to deal with fogging on the windshield?

What is the cancel button on a car?

Does the Buick GL8 have a spare tire?

Why can't the rear seats of the Mercedes-Benz E-Class be folded down?

What kind of engine oil is good for China VI vehicles?

What are the major maintenance items for the Volkswagen Tiguan?