···
Log in / Register

Where to Handle Vehicle Transfer in Fuzhou?

4 Answers
LukeLee
07/29/25 1:48am

It is processed at the local Vehicle Management Office of the Traffic Management Brigade. Below are the relevant details: 1. Conditions for Application: For vehicles where the ownership of a registered motor vehicle has been transferred, the current owner must apply for transfer registration at the vehicle management office of the registration location within 30 days from the date of vehicle delivery. Before applying, all traffic violations and accident liabilities related to the vehicle must be resolved. 2. Required Materials: 'Motor Vehicle Registration, Transfer, Cancellation/Transfer Application Form' (1 original copy); Proof of identity of the current vehicle owner (1 original and 1 copy); Proof or certificate of motor vehicle ownership transfer (1 original copy); Motor vehicle registration certificate (original); Motor vehicle driving license (original); Vehicle Identification Number (VIN) rubbing (1 original copy).

Was this review help?
2
0
Share
MacHaley
08/12/25 11:43am

When I first came to Fuzhou for work last year, I needed to transfer a vehicle. I remember the main place for vehicle transfer in Fuzhou is the Vehicle Management Office of the Fuzhou Traffic Police Detachment, located at No. 101 Fuxia Road, Cangshan District. The transportation there is quite convenient, accessible by subway or bus. I was a bit nervous on my first visit, but the staff were friendly. You can go directly to the hall with basic documents like your ID card and vehicle registration certificate. It's better to go early, especially on weekends when it's crowded. I arrived at 9 a.m. and finished in less than an hour. The process felt smooth, and I even chatted with some newcomers nearby, reminding them to check if the vehicle had any traffic violations to avoid extra trips. Overall, the experience was less complicated than I imagined, and handling things in a new city wasn't difficult.

Was this review help?
20
1
Share
Expand All
ChristopherFitz
10/02/25 3:05am

I've been driving for over a decade and have handled several vehicle transfers at the Fuzhou DMV, located at 101 Fuxia Road. I know the place like the back of my hand. My advice: always check the operating hours before heading there, especially to avoid holidays and unnecessary queues. Bring the original owner's documents, contracts, and photos – their one-stop service makes things hassle-free. Last year when helping a friend with a transfer, checking the opening hours online beforehand saved us a lot of time. Pro tip: make sure the vehicle insurance is complete; missing this can cause frustrating back-and-forth trips. Efficiency is key – choose a weekday visit and you'll get your new certificate within half an hour, avoiding delays that could disrupt your vehicle use.

Was this review help?
1
4
Share
Expand All
DeMackenzie
11/15/25 4:48am

As a homemaker, when I went through the vehicle transfer process in Fuzhou, I chose the vehicle management office located on Fuxia Road in Cangshan District, which is close to our home. Just remember the address is No. 101. It's not convenient to bring children, so try to choose less crowded times, such as weekday afternoons. You need to bring all the family's relevant documents, like ID cards and driver's licenses. The process is simple: first, take a number and wait for your turn, then fill out the forms—nothing too technical. I went with a neighbor auntie, and she shared that preparing copies in advance can speed things up. If the wait is long, you can play with your phone or bring a book to pass the time. After finishing, you can visit the nearby mall—treat it like a little outing. Just be careful not to let the kids run around; safety comes first. Overall, it was pretty easy to handle.

Was this review help?
10
0
Share
Expand All
More Forum Discussions

What is the issue with the Audi hydraulic oil elbow bushing noise?

Audi hydraulic oil elbow bushing noise issue is caused by valve oil leakage and joint detachment. Below is the relevant introduction: 1. Introduction: Audi is a renowned car developer and manufacturer, with its logo featuring four interlocking rings. It is now a subsidiary of Volkswagen Group, headquartered in Ingolstadt, Germany. 2. Main models: Audi A1, Audi A3, Audi A4, Audi A5, Audi A6, Audi A7, Audi A8, Audi Q1, Audi Q2, Audi Q3, Audi Q5, Audi Q7, Audi Q8, Audi TT, Audi R8, and the S, RS performance series, etc.
17
2
Share

Why are second-hand Besturn B50 cars so cheap?

First, the pricing is not high; second, the sales of new cars are not good, with continuous price reductions leading to depreciation of used cars; third, the marketing is poor. Additional information is as follows: 1. In terms of comfort: The Besturn B50 continues to optimize vibration and noise control, achieving improvements in areas such as passing noise and constant-speed driving vibration noise, enhancing the quietness of the cabin space. At the same time, the Besturn B50 is also equipped with an audio system configuration, such as the addition of an AUX interface, forming two external audio source playback functions with USB, providing users with more choices. 2. In terms of configuration: The Besturn B50 adds a cornering assist lighting system, which can automatically control the cornering lights (front fog lights) based on changes in driving conditions and vehicle status. In addition, new safety equipment includes a reminder for the front passenger seatbelt not being fastened, anti-whiplash seats, full hidden airbags, central locking, and headlight level adjustment.
1
5
Share

Tesla's Maximum Wading Depth?

Tesla's maximum wading depth is 138mm. Tesla's wading depth is determined by the height of the vehicle's chassis, which is the ground clearance listed in the model's parameter configuration table. Generally, the greater the ground clearance, the higher the chassis, and the higher the safety factor when passing through waterlogged roads. Therefore, in terms of safe wading depth, the advantages of off-road vehicles and SUVs are obvious. However, for most compact and small cars with low chassis, the position of the vehicle's air intake should be used as a benchmark when passing through waterlogged roads. If the air intake is below the water level when wading, water will be sucked into the engine's cylinders. Since water cannot be compressed like air, it will cause severe damage to the engine's mechanical components (such as connecting rods, pistons, crankshafts, etc.). Therefore, the wading depth must not exceed the height of the engine's air intake. Alternatively, installing a wading snorkel can increase the height of the engine's air intake, thereby increasing the maximum wading depth. If wading is unavoidable, the following safe and correct operations should be performed: Before wading, always turn off the auto start-stop function to prevent the engine from automatically restarting after stalling in water, which could lead to severe damage if water enters the engine. Assess the underwater road conditions based on the passage of preceding vehicles and choose an appropriate entry point. Observe the path taken by other vehicles and follow their tracks at low speed, avoiding sudden acceleration or deceleration. On roads prone to water accumulation, use warning water level markers, trees, or other vehicles' wheels and doors as reference points to estimate water depth before deciding whether to proceed. Know your vehicle's safe wading depth. If the water depth exceeds half the tire height or the engine's air intake, avoid entering the water and choose an alternative route instead.
11
4
Share

Should the Nissan Sylphy ECO Mode Be Turned On?

In congested urban traffic conditions, turning on the ECO mode yields the best results, while it is unnecessary during high-speed driving. In stop-and-go city traffic, strong power is not required, and frequent acceleration and braking lead to higher fuel consumption. Activating the ECO mode in such scenarios not only reduces fuel consumption but also enhances driving comfort. Scenarios where ECO mode is unnecessary: There are a few situations where ECO mode is not needed: 1. When the car is driving at high speeds (up to 100km/h), even if ECO is turned on, the vehicle's computer will prioritize speed, causing the ECO mode to automatically deactivate. 2. When high torque output is required, such as when climbing hills, the engine computer will prioritize delivering sufficient power to drive the vehicle, and the ECO mode will automatically deactivate. Location of the ECO button: The ECO button is typically located on the left side of the car, marked with the letters 'ECO.' Some models feature a green button, making it easily identifiable.
12
2
Share

Do I Need to Change to Snow Tires When Driving to Northeast China During the Spring Festival?

Driving to Northeast China requires snow tires, as their grip performance is significantly better than regular summer tires or all-season tires. If you encounter icy roads, most vehicles without snow tires will be unable to move. Snow tires help vehicles achieve optimal braking performance on winter roads. Snow tires, also known as winter tires, are made by adding certain additives to ordinary rubber during production, ensuring the tires do not harden significantly in winter. Regular tires tend to become very hard in winter, reducing their grip and making them prone to slipping in snowy conditions. The tread material of snow tires is softer, and their specially formulated silica-mixed rubber compound allows for tighter contact with smooth ice surfaces, generating greater friction than all-season tires. This improves the vehicle's handling and safety on icy roads. Tires are rubber products, and prolonged use leads to aging. Therefore, it is recommended that car owners replace their tires regularly. Generally, tires should be replaced every four years. When purchasing tires, make sure to check the production date clearly.
16
2
Share

Where is the China VI Emission Standard Implemented?

The China VI emission standard has been implemented ahead of schedule in regions such as Beijing-Tianjin-Hebei, Yangtze River Delta, Pearl River Delta, Chengdu-Chongqing, Fenwei Plain, and Inner Mongolia. Specific provinces and cities include Beijing, Tianjin, Hebei, Shanxi, Shandong, Henan, Shanghai, Jiangsu, Zhejiang, Anhui, Shaanxi, some cities in Inner Mongolia, Guangdong, Chongqing, Sichuan, and Hainan. The early implementation regions are based on national-level documents such as the 'Blue Sky Defense Battle' and the 'Action Plan for the Battle Against Pollution by Diesel Trucks,' combined with statistics, leading to the issuance of the 2019 document on the early implementation of the China VI standard in these provinces and cities. For light vehicles (such as cars, SUVs, pickup trucks, and micro trucks), the normal implementation time for the China VI standard is July 1, 2020. For general-purpose heavy-duty vehicles, the implementation date is July 1, 2021.
14
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.