···
Log in / Register

Where to Handle Traffic Violation Points Deduction?

4 Answers
SanElle
07/29/25 1:39am
Different scenarios for handling points deduction due to traffic violations are as follows: 1. On-the-spot ticket issuance: If a traffic police officer issues an on-the-spot penalty decision for a vehicle violation, you must bring your ID card, driver's license, vehicle registration certificate, and the penalty ticket to the local traffic detachment or brigade to handle the violation. In this case, the violation must be processed at the location where it occurred; it cannot be handled in your home jurisdiction. Please take note. 2. Electronic surveillance ticket: If the violation is captured by electronic surveillance without an on-the-spot ticket being issued, after checking the violation record on the traffic management bureau's website, if it falls under the general summary procedure category, it can be handled in a different location. Otherwise, the violation must be processed at the local traffic management department where the violation occurred.
Was this review help?
12
1
Share
Ian
08/12/25 11:31am
I've got a clear understanding of how to handle traffic violation points now. I had a personal experience recently when I was caught changing lanes carelessly and got 3 points deducted. There are actually several ways to deal with it. The most straightforward method is to visit the traffic police station's violation handling window, bringing your vehicle license, driver's license, and ID card – you can get it done on the spot. If you find it troublesome, you can use the Traffic Management 12123 App, which is super easy to operate. After real-name authentication, you can directly pay the fine, and the deducted points will be automatically recorded in the system. If the violation occurred in another city, you can also handle it either at the vehicle's registration location or where the violation happened. Remember to deal with it as soon as possible; don't wait until the annual inspection and end up in a rush. A friend of mine learned this the hard way. Also, a reminder to everyone: it's best to handle it in person to avoid making a wasted trip due to incomplete documents.
Was this review help?
13
1
Share
Expand All
OElisa
10/02/25 2:49am
I just finished handling the traffic violation points deduction last week. There are three most reliable channels: first, the license processing halls at various traffic police stations, just bring your driver's license and ID card; second, the Traffic Management 12123 app on your phone, which is now widely used by young people for self-service processing; third, designated bank branches, as some banks can collect traffic violation fines on behalf. Pay special attention to check the accepting unit on the ticket to avoid wasting time by going to the wrong place. The processing must be completed within 15 days, otherwise a 3% late fee will be charged daily. I recommend that new drivers take photos of their documents as backup when handling violations, which makes it easier to reprint proofs if needed. By the way, remember to check how many points you have left on your driver's license.
Was this review help?
14
4
Share
Expand All
MiaAnn
11/15/25 4:32am
Dealing with traffic violation points requires targeted approaches. For local violations, the fastest way is to handle them directly at the traffic police station. For out-of-town violations, you can choose to process them either at the vehicle's registered location or the violation location. The Traffic Management 12123 App is indeed convenient now—just bind your license plate to handle it online. When processing, preparing three essential documents is a must: original ID card, driver's license, and vehicle registration certificate. If points deduction requires on-site handling, the process involves confirming the violation, signing the penalty slip, paying the fine, and automatic points deduction by the system. Remember, helping friends deduct points is strictly monitored—it's best to handle it personally. Don't discard penalty slips randomly; all violations must be settled before passing the annual inspection.
Was this review help?
17
2
Share
Expand All
More Forum Discussions

What are the reasons why a car cannot engage reverse gear?

Here are the reasons why a car cannot engage reverse gear: Clutch not fully depressed: For manual transmission cars, the clutch pedal must be fully depressed to shift gears. Simply pressing the clutch pedal deeper can resolve this issue. Gear teeth alignment: Many cars do not have synchronizers installed for the reverse gear. When attempting to engage reverse, the teeth of two gears might be perfectly aligned, causing the gear to get stuck and preventing engagement. In this case, simply shift into a forward gear first and then try engaging reverse again. During gear shifting, transitioning from a higher gear to a lower gear can easily cause impact between gear teeth or spline teeth, and the synchronizer's role is to prevent such impacts. Transmission malfunction: If there is an issue with the car's transmission, it is recommended to visit a 4S shop for repair. The required repair costs might be relatively high, and the repair time could be lengthy.
1
1
Share

What is the normal tire pressure for car wheels?

Car tire pressure is generally considered normal within the range of 230-250kpa. However, the specific normal tire pressure should be based on the manufacturer's recommended value, which can usually be found in the car's user manual, on the label near the driver's door (B-pillar), in the drawer next to the driver's seat, or on the fuel tank cap. The hazards of both underinflated and overinflated tires are as follows: Hazards of underinflated tires: Increased friction coefficient with the road surface, leading to higher fuel consumption. The friction between the tire and the ground multiplies, causing a sharp rise in tire temperature, softening of the tire, and a rapid decrease in strength. This can result in a tire blowout when driving at high speeds. Hazards of overinflated tires: Reduced tire friction and adhesion, affecting braking performance. This can cause steering wheel vibration and deviation, reducing driving comfort. It accelerates uneven wear of the tread pattern in the center of the tire, increasing the risk of tire bulging and stone trapping. Overinflation also causes excessive stretching and deformation of the tire cords, reducing the tire's elasticity. This leads to increased impact during driving and higher road noise.
10
0
Share

How to Deal with Severe Peeling of Car Seats?

Car seat aging and peeling cannot be repaired. It is recommended to purchase genuine leather seat covers online and install them on the seats, or visit a roadside car decoration shop to have a new set of genuine leather seats custom-made, then remove the original leather and replace it. If this situation occurs during the car's warranty period, you can inquire at a 4S shop and ask them to provide a corresponding solution. However, such cases are relatively rare, but it's worth a try if it happens. Seat maintenance methods: 1. Regularly clean genuine leather seats: Do not wait until stains appear before cleaning. 2. Periodically apply genuine leather protectants: Products like leather protection wax can also be used to effectively extend the lifespan of genuine leather seats. 3. Avoid leaving the car under direct sunlight for prolonged periods: This can easily lead to leather aging and hardening.
18
4
Share

What does a mobile speed enforcement zone mean?

Mobile speed enforcement is a method of speed detection. The movable speed detection devices used by speed enforcement vehicles parked on the roadside can freely adjust their direction and capture speeding vehicles from different angles. Below is relevant information about mobile speed enforcement: 1. Definition: Mobile speed enforcement is a method of speed detection. The movable speed detection devices used by speed enforcement vehicles parked on the roadside can freely adjust their direction and capture speeding vehicles from different angles. In other words, they can photograph either the rear or front license plates, with the specific difference being the parking position of the enforcement vehicle and the direction of the speed detection device. 2. Practical situation: In actual operations, the method of photographing rear license plates is mostly used. If the method of photographing front license plates is adopted, when there are many vehicles, it may be difficult to capture the actual speeding vehicle because oncoming vehicles traveling normally can easily block the license plate of the speeding vehicle.
9
3
Share

What is the best engine oil for Dongfeng Nissan Sylphy?

Nissan Sylphy is best suited with the original 5W30 engine oil. The selection factors and precautions for adding engine oil are as follows: Factors for selecting engine oil: It depends on factors such as the vehicle model and engine. The most basic selection of engine oil type should be based on the vehicle model. When purchasing engine oil, it is necessary to consult the relevant customer service or auto repair shop. The choice of engine oil can also be based on the requirements of the engine. It is unnecessary to use overly advanced engine oil in engines with lower requirements, nor should lower-grade engine oil be used in engines with higher requirements. If the engine is in good condition and the seasonal temperature is low, it is advisable to use engine oil with lower viscosity to ensure smooth oil flow. In high-temperature seasons or when the engine is severely worn, using high-viscosity engine oil is beneficial for forming an oil film and reducing engine wear. Precautions for adding engine oil: Different types of engine oil should not be mixed. If changing from high-grade to ordinary engine oil, the existing oil should be completely drained, and the lubrication system should be cleaned thoroughly to avoid mixing. The amount of engine oil added should be slightly lower than the maximum mark on the oil dipstick, and it should not be overfilled. Overfilling has adverse consequences. Excessive engine oil increases the rotational resistance of the crankshaft, reduces the engine's output power, and may lead to oil entering the combustion chamber and participating in combustion.
13
3
Share

What Causes Loud Ignition Noise in Wall-Mounted Boilers?

Here are the reasons for loud ignition noise in wall-mounted boilers: Excessive impurities in natural gas: Wall-mounted boilers primarily rely on natural gas for energy supply, so the quality of natural gas is closely related to the performance of the boiler. If the natural gas contains many impurities, it can easily cause explosive combustion, resulting in loud noises from the boiler. Aging components of the wall-mounted boiler: In addition to the quality of natural gas, the service life of the wall-mounted boiler is also a factor to consider. After prolonged use, the burner and proportional valve of the boiler may age to some extent, leading to incomplete combustion of gas. This can also cause explosive combustion of natural gas, resulting in loud noises from the boiler. Poor circulation in the boiler system pipes: If the circulation in the system pipes of the wall-mounted boiler is poor, the issue is relatively easy to resolve. It is usually caused by noise from the system air pump, and the solution is to open the system exhaust valve to release the air. Damaged fan in the wall-mounted boiler: If the boiler produces noise immediately upon startup, it is mostly due to the destruction of the fan's dynamic balance, caused by vibration. Replacing the fan is necessary to eliminate the noise.
13
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.