Where to Handle Motor Vehicle Scrapping?

1 Answers
MacAnastasia
07/30/25 12:30am
Motor vehicle scrapping procedures are handled at the local public security traffic management department (local vehicle management office). Conditions for motor vehicle scrapping: The vehicle has reached the service life limit for its category; after repair and adjustment, it still fails to meet the national safety technical standards for in-use vehicles; after repair, adjustment, or adoption of control technology, it still fails to meet national standards for atmospheric pollutant or noise emissions for in-use vehicles; the vehicle has failed to obtain an inspection compliance mark for three consecutive safety inspection cycles after the inspection validity period has expired. Required materials for motor vehicle scrapping: Vehicle license; vehicle registration certificate; license plates; for organizational vehicles, an organizational code certificate (copy) with official seal; for personal vehicles, the owner's ID card; accident vehicle certification materials; for organizational vehicles, the "Motor Vehicle Deregistration Application Form" and "Scrapped Vehicle Certificate" must bear an official seal (matching the name on the license), while personal vehicle owners must sign these documents.
Was this review help?
11
1
Share
More Forum Discussions

What is the wading depth of an EFI scooter motorcycle?

The wading depth of a scooter motorcycle is generally below the height of the exhaust pipe outlet. At this height, water immersion is completely safe. Since water does not enter the engine and does not even exceed the chassis height, you can generally start and drive the engine with confidence. Special reminders when wading: If slipping or idling occurs while wading, stop and turn off the engine immediately. If the motorcycle sways left and right and does not move forward, do not let the engine stall in the water. Solution for a flooded battery: It is recommended to go to a professional repair station and use a battery hydrometer to measure the specific gravity of the battery electrolyte. If the specific gravity is low, you can pour out the existing electrolyte, prepare a new electrolyte solution with the appropriate concentration as required, refill it, and then use a battery charger to recharge the battery.
11
1
Share

Can an A2 License Drive an A3 Vehicle?

An A2 driver's license cannot drive an A3 vehicle, nor can it drive an A1 vehicle. A1, A2, and A3 licenses are not interchangeable. To drive all these vehicle types, one must take separate exams. Below is relevant information about driver's licenses: 1. Levels: The A-class license is the highest level, B-class is secondary, and C-class is the standard level. A1, B1, and C1 form one series, while A2, B2, and C2 form another. 2. Special licenses: The A3 license is the least useful because it is essentially for a single vehicle type—city buses. Strictly speaking, an A1 license can also drive buses, as A1 is for large passenger vehicles. However, the A3 license can be obtained independently, which makes it unique. Therefore, the A3 license is a very special type, exclusively for the public transportation system.
4
4
Share

What is the reason why the boost pressure of the EA888 does not reach the limit?

The boost pressure of the EA888 not reaching the limit may be due to turbocharger air leakage or damage. Car engine maintenance methods: 1. Maintain the three filters: The three filters refer to the air filter, oil filter, and fuel filter. The three filters play a filtering role for air, oil, and fuel in the car engine, thus protecting the engine and improving its working efficiency. 2. Keep the crankcase well-ventilated: Most gasoline engines are now equipped with a PCV valve (Positive Crankcase Ventilation), but pollutants from blow-by gas can deposit around the PCV valve, potentially clogging it. Therefore, it is necessary to regularly clean the pollutants around the PCV valve. 3. Regularly clean the crankcase: During engine operation, high-pressure unburned gas, acid, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal powder from component wear to form sludge. Therefore, the crankcase should be cleaned regularly to maintain the cleanliness inside the engine.
6
5
Share

Is the simulated engine sound inside or outside the car?

Simulated engine sound is inside the car. Here is an introduction to related content about simulated engine sound: 1. Volkswagen: Volkswagen installs a speaker near the engine throttle and further enhances the engine sound effect by using audio files in the vehicle's computer. Currently, this system is installed in high-performance models such as the Volkswagen Golf GTI, Jetta GLI, and Golf R, producing amplified sounds. 2. BMW: The BMW M5 adopts a similar sound packaging method to provide drivers with better auditory effects. The system is called Active Sound Design. Its working principle involves pre-recording the engine sound, and then the vehicle's computer automatically adjusts the audio effect based on the actual engine speed during driving. Therefore, it's not without reason that many people refer to BMW as the master of sound effects.
17
5
Share

Is the C1 driver's license test difficult?

Compared to C2, C1 is relatively more challenging. There are two categories available for learning to drive and obtaining a driver's license: C1 and C2. The C1 license involves learning with manual transmission vehicles, which allows driving both manual and automatic transmission cars. On the other hand, the C2 license is for automatic transmission vehicles only, restricting the driver to automatic cars. Below are the differences between manual and automatic transmissions: 1. Automatic Transmission: Automatic cars only have an accelerator and brake pedal, without a clutch, making operation simpler. During the second test phase, you only need to control the brake to complete all test items. In the third phase, managing just the accelerator and brake is sufficient, eliminating concerns about stalling or rolling back. 2. Manual Transmission: Manual cars require the use of a clutch to control the vehicle while driving. Inaccurate clutch control can easily cause the car to stall, especially during hill starts where improper speed control may lead to stalling or failure.
4
4
Share

Should the Volkswagen Lavida use 92 or 95 octane gasoline?

Volkswagen Lavida uses 92 octane gasoline. Methods to check the suitable gasoline grade: Refer to the car's user manual, which records the recommended gasoline grade for the vehicle. The fuel cap will also indicate the fuel grade, recommending the optimal gasoline grade to use. Impact of using 95 octane gasoline in the Volkswagen Lavida: 95 octane gasoline has a higher isooctane content, which means the heptane content is reduced. Heptane affects the combustion speed, so 95 octane gasoline burns slower than 92 octane gasoline. If 95 octane gasoline is used in the Volkswagen Lavida, it may lead to incomplete combustion, resulting in insufficient power and even increased carbon deposits. As for fuel efficiency, since the combustion speed is slower, it may feel more fuel-efficient.
2
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.