Where to Go for the Second-Year Inspection of a New Car?

1 Answers
StephanieMarie
07/28/25 11:36pm
No inspection is required in the second year. More information about vehicle inspection is as follows: 1. According to Article 11 of the "Opinions on Strengthening and Improving Motor Vehicle Inspection Work": Starting from September 1, 2014, a trial exemption system for inspection is implemented for non-operational passenger cars and other small and mini passenger vehicles (excluding vans and vehicles with 7 or more seats) within 6 years of registration. 2. For non-operational passenger cars and other small and mini passenger vehicles (excluding vans and vehicles with 7 or more seats) within 6 years of registration, when a biennial inspection is required, the vehicle owner can directly apply for the inspection label from the traffic management department of the public security authority by providing the compulsory traffic accident liability insurance certificate and the vehicle and vessel tax payment or exemption certificate, without the need to undergo safety technical inspection at an inspection institution.
Was this review help?
7
1
Share
More Forum Discussions

What is the fuel tank capacity of the Tiguan?

Currently, there are 6 Tiguan models on sale. The fuel tank capacity of the 330TSI version is 60 liters, while the 380TSI version has a fuel tank capacity of 62.5 liters. This data is published by the automobile manufacturer, and Tiguan owners can also check it on the vehicle's configuration sheet. The Tiguan requires 95-octane fuel, with a fuel consumption of 6.6 to 7.7L per 100 kilometers. A full tank can cover a distance of 812 to 919 kilometers. During daily driving, it is necessary to always pay attention to the remaining fuel level in the tank. This is usually observed through the fuel gauge inside the car. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments. It is advisable to refuel when there are only 2 segments left to avoid running out of fuel midway. During actual refueling, the amount of fuel may exceed the marked capacity. This is because the fuel tank capacity marked by the manufacturer is measured from the bottom of the tank to the safe limit. There is additional space from the safe limit to the tank opening, which is designed to accommodate fuel expansion due to temperature increases without causing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the marked tank capacity.
10
1
Share

How to Fold Down the Rear Seats of the Teana?

The rear seats of the Teana cannot be folded down. Below is an introduction to the rear seats of the Teana: Rear seat folding methods include proportional folding and full folding. The correct steps to adjust car seats are: 1. Adjust to a suitable sitting position; 2. Adjust the seat height; 3. Adjust the backrest angle; 4. Adjust the seat distance. The dimensions of the Teana are 4901mm in length, 1850mm in width, and 1450mm in height, with a wheelbase of 2825mm. It is equipped with a CVT continuously variable transmission. The car has a top speed of 197 km/h, a fuel tank capacity of 61.3L, a maximum horsepower of 156, and a front-wheel drive system.
18
3
Share

How to Replace a Mercedes Car Key?

Mercedes car keys can be replaced at 4S stores or auto parts markets. More details about car key replacement are as follows: 1. Most car keys are equipped with electronic chip anti-theft technology, using two-way communication between the key and the vehicle. When the key ID verification is successful, the CAN communication sends a signal to the BCM to allow engine start-up. Only keys with registered ID codes in the BCM and ECM can start the engine. 2. 4S stores use specialized diagnostic computers and software to register keys. After initializing the ignition key, the key ID code is registered step by step. Auto parts markets may use password decryption methods to match keys, which has lower security. 3. For vehicles with smart keys, simply re-register the key. For mechanical keys with chips, 4S stores need to replace the steering lock to register the key and recommend replacing all mechanical lock cylinders in the vehicle.
7
4
Share

Do China VI new cars still need a break-in period?

China VI new cars still require a break-in period. Here is relevant knowledge about new car break-in: 1. China VI is merely a national emission standard for testing pollutant levels in exhaust gases, which has no direct relationship with the break-in period. Therefore, any new car still needs to undergo proper break-in. 2. In the past, due to less advanced automotive manufacturing processes, produced components were relatively rough and did not fit together perfectly when installed in vehicles, necessitating a break-in period for these parts to adapt to each other. 3. Today's automotive industry can utilize industrial robots and automated programming to manufacture more precise and durable automotive components that can operate smoothly immediately after installation. Although modern vehicles have lower break-in requirements, this doesn't mean they don't need any break-in at all.
13
4
Share

How many times can the Subject 1 test be scheduled at once?

You can schedule up to three times for the Subject 1 test at once. Here is some information about scheduling the Subject 1 test: 1. Scheduling rules: For the C1 driver's license Subject 1 test, you have five opportunities to retake the test. Each retake requires paying a retake fee and rescheduling. 2. Regulations: According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses": Article 37 states that each subject test can be taken once, and if the test is failed, it can be retaken once. If you do not take the retest or fail the retest, the current test session is terminated, and the applicant must reschedule the test. However, Subject 2 and Subject 3 tests must be scheduled at least ten days later. If the Subject 3 safety and civilized driving knowledge test is failed, the passed road driving skills test results remain valid.
14
4
Share

What are the body dimensions of the Fengjun 7?

Fengjun 7 has a length, width, and height of 5395mm/1800mm/1760mm, which are official data. The length of Fengjun 7 refers to the distance between two vertical lines perpendicular to the vehicle's longitudinal symmetry plane and touching the outermost protruding parts at the front and rear of the car. The width refers to the distance between two planes parallel to the vehicle's longitudinal symmetry plane and touching the outermost rigid fixed protruding parts on both sides of the vehicle. The height refers to the distance between the highest point of the vehicle and the supporting plane of the vehicle. The turbocharged engine of Fengjun 7 has a maximum power of 115kw and a maximum torque of 345 Nm. The maximum power speed of this engine is 3600 rpm, and the maximum torque speed is 1400-2800 rpm. It is equipped with direct injection technology and uses an aluminum alloy cylinder head and cast iron cylinder block. This engine is matched with a manual transmission (MT). There are national regulations regarding the dimensions of vehicles. According to the national standard "GB1589-89," the total width of a vehicle does not include rearview mirrors. The limitation on vehicle width is to provide sufficient lateral clearance for overtaking between adjacent lanes. This means that in the national standard, the significance of vehicle width data is to ensure enough space during overtaking, preventing accidents due to excessive width or situations where road markings are narrower than the vehicle's width. Additionally, national regulations stipulate that the total width of a vehicle must not exceed 2.5m to meet the usage requirements of public roads.
7
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.