Where to go for second-hand car transfer in Fangshan?

2 Answers
LaIan
07/25/25 3:17pm
Pay the transaction fee at the used car trading market in the vehicle's location and obtain the transaction invoice. Enter the inspection information at the inspection station, and return the original license plate for destruction. The process of second-hand car transfer: The used car trading market in the vehicle's location verifies that the relevant vehicle is a normal and legal vehicle in the transaction. How to handle second-hand car transfer: Bring the transaction invoice and the original and photocopied documents of both the buyer and seller, and hold all the materials to queue up at the vehicle management office's certification hall for processing. After reviewing the materials, the registration and inspection officer will enter the registration information and issue an acceptance receipt. The vehicle owner will then collect the vehicle license, vehicle registration certificate, license plate, and complete the business process at the certification window in the hall.
Was this review help?
20
2
Share
DiJulia
08/11/25 9:23pm
I recently completed a used car transfer in Fangshan and had to make several trips before getting it done. Actually, you can just go to the Changyang Vehicle Inspection Station of the Fangshan Traffic Brigade or the Fangshan Vehicle Management Office. The address is near Changyang Town in Fangshan District, and you can search for the exact location using navigation. It opens at 9 AM on weekdays with fewer people. The process is quite simple—bring copies of the original owner’s ID, the purchase invoice, the vehicle registration certificate, and your own documents. First, go through a safety inspection in the testing area to check lights and brakes, then pay the fee at the window, which costs a few dozen yuan plus transaction tax. Remember to arrive early to avoid long queues at noon. After the transfer, don’t forget to ask about license plate photos and insurance renaming. The whole process takes half a day at most, and the service in Fangshan is quite good with high efficiency.
Was this review help?
16
5
Share
Expand All
More Forum Discussions

Can Tap Water Be Used for Windshield Washers?

Windshield washer fluid cannot be replaced with tap water. Tap water lacks cleaning properties and contains impurities that may clog the washer nozzles. Below are detailed reasons why tap water should not be used as a substitute for windshield washer fluid: 1. Especially in winter, tap water should never be used. Low temperatures can cause tap water to freeze. When liquids freeze, they expand, potentially damaging the washer fluid reservoir and, in severe cases, the rubber hoses. 2. During winter, always use a product with a sufficiently low freezing point. If the washer fluid's freezing point is too high, it may also freeze. 3. After refilling the washer fluid, always securely fasten the reservoir cap to prevent dust or impurities from entering. 4. If the washer nozzles become clogged, it is recommended to replace them with new ones.
15
0
Share

Why does the fuel gauge always show not full after refueling?

Reasons why the fuel gauge shows not full after refueling are as follows: 1. Occasionally, it may be a normal phenomenon. The fuel tank was not actually full, and the fuel nozzle jumped because gasoline vapor 'pushed' the nozzle to jump. 2. If the refueling speed is too fast, it will generate expanding vapor. Additionally, if the carbon canister solenoid valve is closed at this time, the gasoline vapor in the carbon canister will accumulate more and more. After the fuel nozzle jumps, there is some vapor between the fuel inlet and the fuel tank. 3. If the fuel gauge often shows not full after refueling, it indicates a problem. The most common issue is a problem with the fuel pump's float. Solution: Replace the fuel pump.
1
2
Share

How to use navigation in GAC Trumpchi GS3?

GAC Trumpchi GS3 navigation method: You need to open the navigation software, click on 'Find Route', enter the starting point and destination, select the destination, click 'Confirm', then click 'Start Navigation', and follow the instructions to drive. Only the Luxury and Premium versions of the Trumpchi GS3 come equipped with a GPS navigation system; other versions require aftermarket installation. The GAC Trumpchi GS3 is a compact SUV under the GAC Trumpchi brand, with dimensions of 4350mm in length, 1825mm in width, and 1655mm in height, and a wheelbase of 2560mm. Depending on the version, the GAC Trumpchi GS3 offers features such as automatic air conditioning, rear air vents, seat heating, one-button start, keyless entry, rearview camera, electronic parking brake, auto hold, and an 8-inch multimedia system. For smartphone connectivity, it supports Baidu Carlife but does not have native CarPlay functionality.
19
1
Share

How to Handle Car Paint Repair Interfaces?

Steps for handling car paint repair interfaces are as follows: 1. Choose a dust-free space. 2. Use 3M sandpaper or 2000-grit sandpaper to remove the clear coat at the interface location. 3. Apply the base coat, being careful not to spray beyond the interface area. 4. Apply the clear coat—the first layer should cover the base coat area, while the second layer should not fully cover the interface area, leaving a gap of about five centimeters. 5. Sprinkle interface solution on the interface area to properly treat it. Clean off any mud or sand around the damaged area. If the scratch is deep, apply putty. Before applying putty, use P240 sandpaper to roughen the damaged area to enhance putty adhesion. Mix an appropriate amount of body filler and hardener evenly. When applying the putty, first fill in the dents or scratches firmly, then use a scraper at a 45-degree angle to level the damaged area, which should be slightly higher than the surface of the part. Use an iodine-tungsten lamp to speed up drying. Once dry, sand it smooth with P320 sandpaper, then polish it with P800 sandpaper before applying primer. For shallow scratches, directly sand the damaged area smooth with P320 sandpaper. The radius from the center of the damage to the feathered edge should ideally be 60-100MM. Then, polish it with P800 sandpaper. Use an air gun to clean off any moisture and dust from the surface and gaps. Mask off an 80CM radius around the damaged area with masking paper before applying primer. When spraying primer, ensure the air pressure is not too high—keep it below 2KPa, and use a wet-on-wet half-spray technique.
6
4
Share

How to adjust the time on GAC Trumpchi GS4?

Method to adjust the time on GAC Trumpchi GS4: 1. Start the GAC Trumpchi GS4, open the vehicle display screen, and click the settings icon in the lower right corner; 2. Click on the date and time on the display screen; 3. Click on the set time on the display screen; 4. Modify the time on the display screen; 5. After modifying the time, click the return button on the display screen. The Trumpchi GS4 is a compact SUV under the Trumpchi brand, with a body length of 4545mm, width of 1856mm, height of 1668mm, and a wheelbase of 2680mm. The trunk volume of the Trumpchi GS4 is 470 liters without folding the rear seats, and 1560 liters after folding the rear seats.
4
5
Share

How to turn on the heating in GAC Trumpchi GS4?

Method to turn on the heating in GAC Trumpchi GS4: First press the AUTO button to activate the air conditioning system inside the car, then adjust the fan speed, and finally press the temperature increase button to turn on the heating. The Trumpchi GS4 is a compact SUV with dimensions of 4545mm in length, 1856mm in width, and 1668mm in height, with a wheelbase of 2680mm. This model is equipped with a 1.5-liter turbocharged engine across the entire lineup. This engine delivers 169 horsepower and a maximum torque of 265 Nm, capable of outputting maximum power at 5000 rpm and maximum torque between 1700 to 4000 rpm. The engine is paired with either a 6-speed manual transmission or a 6-speed automatic transmission.
19
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.