Where to Get the Vehicle Annual Inspection Sticker?

2 Answers
MacJude
07/24/25 1:12pm
Vehicle annual inspection stickers can be obtained at the vehicle management office or traffic police station. Below are relevant details about the annual inspection: 1. Conditions: Vehicles whose condition does not match the records on the driving license or registration file, or whose license plates or driving licenses are damaged, incomplete, illegible, or self-made. 2. Notes: The vehicle's exterior must not be modified. The color of window tint or sunshade film should not be too dark (items inside the vehicle should be visible from one meter away; mainly applies to vans and trucks, but not to passenger cars with 5 seats or fewer). Vans and trucks must have enlarged rear license plate numbers. The number of spring leafs cannot be increased or decreased. The number of seats in vans cannot be more or less than specified. A fire extinguisher is required. The cargo compartment of box trucks cannot be modified (no side doors, no roof openings, no tailgate additions). The size of tires cannot be altered, and the tread patterns on tires of the same axle must be consistent. Vehicles with unresolved traffic violations or those impounded by the court cannot undergo annual inspection.
Was this review help?
14
0
Share
DiJoseph
08/11/25 7:16am
I just bought a used car recently, and the first thing I did was to get the annual inspection sticker. It turns out that the sticker is issued at the motor vehicle inspection station, provided that the vehicle passes the inspection. On the day I went, I brought my vehicle license, compulsory insurance policy, and ID card. After the inspector checked the vehicle and confirmed it was qualified, they directly affixed the sticker to the upper right corner of the windshield. The cost was about 100 to 200 yuan, and the whole process took 40 minutes. I heard that some cities have new policies supporting online appointments and home delivery, but locally, I still had to go in person. Don’t take the sticker placement lightly—if it’s crooked or missing, traffic police can fine you 200 yuan and deduct points, making driving stressful. The annual inspection sticker is valid for one year, and you’ll receive a reminder text a month before it expires. It’s best to arrange things in advance to avoid delays. Although it was my first time and a bit nerve-wracking, following the instructions made it go smoothly.
Was this review help?
2
3
Share
Expand All
More Forum Discussions

What brand is the Jialing Coco engine?

The Jialing Coco engine is a Honda brand. The Jialing CoCo is equipped with a single-cylinder engine with an actual displacement of 107CC, paired with a Delphi fuel injection system, which also complies with the current National 4 emission standards. The maximum power of this engine is 5.2kW, which is considered quite good for its class when paired with a 4-speed cycle, making it fully capable of meeting daily commuting needs. Additionally, this engine retains the kick starter, maintaining the classic retro charm of the 70s and 80s, and it can also be started with the kick starter in case the battery runs out of power. The wheels of this bike also feature chrome-plated wire-spoke rims, and the braking system uses the more classic drum brakes.
1
3
Share

What does it mean when the EA888 engine reports a too rich system in cylinder 1?

Reasons for the EA888 engine reporting a too rich system in cylinder 1: 1. Issues with the air flow sensor. 2. Not all air passing through the air flow sensor enters the cylinder, some leaks outside the closed system. 3. Damage to the control unit. Below is an introduction to the EA888 engine: 1. The EA888 is a large series with many different engine models, such as CWN, DKU, DKW, etc. The 330TSI engine is the EA888 third-generation B (commonly known as 3.5 generation) engine, while the 380TSI engine is the EA888 third-generation engine. The 3.5 generation engine is superior to the 3rd generation engine, meaning the 2.0T low-power engine is better than the 2.0T high-power engine. 2. The internal forging of the 2.0T low-power engine is different, leading to variations in the strength of certain engine components, such as the crankshaft. The 330TSI is equipped with a 2.0T inline 4-cylinder turbocharged low-power engine, paired with a 7-speed dual-clutch transmission, delivering a maximum power of 137KW and maximum torque of 320N·m. The 380TSI is equipped with a 2.0T inline 4-cylinder turbocharged high-power engine, also paired with a 7-speed dual-clutch transmission, delivering a maximum power of 162KW and maximum torque of 350N·m.
9
3
Share

Can the BMW R 1250 GS use 92 octane gasoline?

It is not recommended to use 92 octane gasoline. If a vehicle that requires 95 octane gasoline is filled with 92 octane, engine knocking may occur. This happens because using lower-octane fuel can cause resistance in the engine piston's upward movement, reduce engine efficiency, and lead to abnormal combustion of gasoline in the cylinders, resulting in noise and vibration. The issue stems from the different octane ratings of gasoline—the octane number measures a fuel's resistance to knocking. Higher-octane gasoline has better anti-knock properties. Due to its superior anti-knock performance, high-octane gasoline allows for smoother compression strokes in the engine. When the air-fuel mixture ignites during the power stroke, the better-compressed mixture burns more efficiently. With the same amount of fuel injection, each drop of gasoline burns more effectively, producing greater energy output.
3
3
Share

What to Do When There Is No Pressure in the Manual-Automatic Transmission Accumulator?

Accumulator charging pressure is related to the system pressure, generally between 70%~45% of the system's maximum working pressure. The accumulator is an energy storage device in hydraulic and pneumatic systems. It converts the energy in the system into compression energy or potential energy at the appropriate time and stores it. When the system requires it, the compression energy or potential energy is converted back into hydraulic or pneumatic energy and released to replenish the system. When there is a sudden increase in system pressure, it can absorb this part of the energy to ensure normal pressure throughout the entire system. The accumulator is under pressure when connected to the system. The bladder-type accumulator is filled with high-pressure nitrogen gas inside the bladder.
8
2
Share

Honda CD5 Engine Model

Honda CD5 engine model: F22B1 engine. This Accord was equipped with a 2.2-liter four-cylinder engine featuring Variable Valve Timing and Lift Electronic Control (VTEC). Honda CD5 engine model: J30A1 water-cooled V-type six-cylinder transverse-mounted engine. The fifth-generation Honda Accord-CD5, a completely redesigned model launched in 1994, featured new dimensions and increased interior space. The wheelbase was extended to 106.9 inches, and the overall length slightly increased to 185.6 inches. As an important milestone for the Accord and sedans in its class, the Accord was first equipped with a V6 engine in 1995. The Honda Accord CD5 indeed holds deep nostalgic memories for many people's childhoods, as owning an imported Honda Accord during that era was considered a symbol of affluence.
12
5
Share

What causes the flywheel noise in Audi A3?

Audi A3 flywheel noise causes: 1. Analysis of engine noise characteristics: Engine noises are often related to engine speed, load, temperature, and working cycle. By analyzing the characteristics of the noise, its variation pattern can be identified. 2. The relationship between noise and engine speed: The presence of most common engine noises depends on the engine's speed state. Noises only exist at idle or low speeds. Possible causes include: Excessive clearance between piston and cylinder wall; 3. Piston pin installed too tightly or connecting rod bearing installed too tightly; Excessive clearance between tappet and its guide hole; Wear of camshaft profile; Sometimes, a loose starter clutch causes pulley noise (more noticeable during speed changes). When maintaining a certain speed, the noise becomes chaotic, and short noises are emitted successively during rapid deceleration. Possible causes include: Cracked camshaft timing gear or loose fixing nut; Broken crankshaft; Loose piston pin bushing; Excessive axial clearance of camshaft or loose camshaft bushing.
18
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.