Where to Get the Novice Driver Sticker?

1 Answers
StAdaline
07/29/25 9:29pm
Novice driver stickers are generally available at the respective automotive training schools. Here are some important considerations during the probationary period of a driver's license: Requirement for Highway Driving: During the probationary period, drivers are not allowed to drive on highways alone. If a probationary driver operates a motor vehicle on a highway, they must be accompanied by a licensed driver who has held a driver's license for the same or higher vehicle class for at least three years. The accompanying driver should sit in the front passenger seat to provide guidance. Failure to have a qualified accompanying driver may result in fines. Displaying the Novice Driver Sticker: It is mandatory to display the novice driver sticker during the probationary period. Even when borrowing or renting a car, the sticker must be properly affixed as required by regulations. Driving without the sticker is not permitted. Accumulating 12 Penalty Points: Accumulating 12 penalty points will require retaking the driving tests. While it is possible to receive penalty points during the probationary period, extra caution is advised to avoid accumulating 12 points. If a probationary driver accumulates 12 points, their driver's license will be revoked, requiring them to reapply and retake all driving tests from the beginning (Theory Test, Practical Test, and Road Test).
Was this review help?
12
3
Share
More Forum Discussions

Is it necessary to clean the three-way catalytic converter of the New Transit?

The three-way catalytic converter of the New Transit needs to be cleaned. Generally, the three-way catalytic converter should be inspected and cleaned as needed every 30,000 kilometers. It is advisable to clean the three-way catalytic converter whenever the fuel injectors, throttle valve, and intake tract are serviced. Additionally, it is best to clean the three-way catalytic converter before the annual vehicle inspection to ensure smooth passage of the exhaust emission test. When fuel quality is poor, the fuel contains sulfur, phosphorus, lead, and manganese from anti-knock agents. These chemical components form chemical complexes inside the three-way catalytic converter after combustion and exhaust emission. Due to its honeycomb structure, the three-way catalytic converter is prone to clogging. The use of manganese-containing anti-knock agents in fuel, sulfur- and phosphorus-containing antioxidants in lubricants, and traffic congestion can easily lead to poisoning, failure, and clogging of the three-way catalytic converter. As a crucial component for exhaust gas treatment, the three-way catalytic converter significantly reduces pollutants in vehicle emissions, and all exhaust gases pass through it. If the three-way catalytic converter is damaged or clogged, it is akin to a blocked exhaust pipe, resulting in a noticeable decrease in vehicle power, increased fuel consumption, and severe exhaust pollution.
16
0
Share

What is the actual fuel consumption of the Roewe i6 MAX?

Fuel consumption is 7.8L per 100 kilometers. Below is relevant information: Roewe i6 MAX: The Roewe i6 MAX is a new sedan from SAIC Roewe. The "i" in the model name stands for intelligent, indicating that the Roewe i6 MAX will continue to leverage Roewe's advantages in intelligent connectivity; "MAX" stands for "Make Attitude Xtreme," meaning "premium quality, born to be extreme." Exterior: In terms of appearance, the Roewe i6 MAX is the first sedan to showcase the digital rhythm design concept, featuring the Ronglin Spreading Wings grille created through parametric design. The Roewe i6 MAX adopts the Ronglin Spreading Wings grille, with the Ronglin pattern units inside the grille designed using computational methods. The headlights are connected to the grille, with the daytime running lights featuring a simple T-shape that integrates with the decorative strip running through the headlights. The position lights use a semi-thick-walled light-emitting structure, combining the functions of daytime running lights, turn signals, and position lights into one, reducing size and enhancing simplicity and elegance. The L-shaped fog light trim below visually complements the downward trend of the headlights.
15
3
Share

What to Do When the Car's Primer is Scratched?

There are three ways to deal with scratches on the car's primer: 1. For minor scratches, which are mostly caused by trees or plants, wash the car clean, apply coarse wax in a circular motion first, then fine wax, wiping in the same direction from the inside out for a longer time. Finally, wipe off the wax with a clean cloth, and you will see the small scratches disappear. If the scratches remain, there are two possibilities: insufficient polishing time or the scratches being slightly deep. 2. Wash and dry the car, shake the touch-up pen before use to mix the paint evenly. Before touching up, stick adhesive tape on both sides of the scratch to make the process easier and prevent the touch-up pen from painting other areas. After the touch-up paint dries, polish it with fine wax. 3. Scratches that expose the primer can easily cause the metal to rust, so surface rust removal and rust prevention are necessary. Wash and dry the car, apply rust remover to the scratched area, wait about 15 minutes, then wipe off the rust remover with a clean cloth and apply rust inhibitor. After applying the rust inhibitor, wait a few minutes before spraying with spray paint. Before spraying, cover the surrounding area of the scratch with newspaper. If dealing with scratches that expose the primer is difficult, it is recommended to seek professional help at a repair shop.
14
1
Share

Can Unopened Engine Oil from 2014 Still Be Used?

2014's unopened engine oil generally cannot be used. The shelf life of unopened engine oil is typically around 5 years. If the oil has been stored for too long, its chemical composition may deteriorate, and it is recommended not to continue using it to avoid damaging valve seals and the engine. Below are some precautions for using engine oil: Under proper storage conditions, engine oil can last for 4 to 5 years. Once opened, its sealed storage period is generally about one year. The greater the temperature fluctuations and humidity in the storage environment, the faster the oil will deteriorate. For every 10-degree Celsius increase in temperature, the lifespan of the oil is halved. Avoid leaving the oil cap open and exposing it to sunlight. The correct method is to store the oil in a sealed, cool place. Poor sealing can lead to oxidation when the oil comes into contact with air, and high temperatures accelerate this oxidation process. If the engine oil in the car has been used for a relatively long period, such as covering half the usual maintenance interval mileage, the storage time should be reduced. It is recommended to replace the oil if it has been stored for more than 3 months before the next use. Leftover oil from maintenance, if stored properly, can be kept for about one year.
10
2
Share

What type of oil does the Orlando use?

The Orlando should use semi-synthetic or fully synthetic oil. There are three types of engine oils used in vehicles: mineral oil, semi-synthetic oil, and fully synthetic oil, each serving different purposes. Compared to semi-synthetic and mineral oils, fully synthetic oil offers better performance and provides superior protection for the engine. The Orlando is a compact SUV launched by Chevrolet, equipped with a 1.3T turbocharged engine. This engine delivers a maximum power of 120 kW and a maximum torque of 230 Nm. In terms of the transmission system, it is paired with a 6-speed automatic transmission.
3
3
Share

What Energy Sources Do New Energy Vehicles Use?

New energy vehicles primarily utilize fuel cells, hybrid power, and hydrogen energy. New energy vehicles refer to vehicles powered by energy sources other than gasoline or diesel engines, including solar energy, among others. New energy vehicles encompass four main types: Hybrid Electric Vehicles (HEV), Battery Electric Vehicles (BEV, including solar-powered vehicles), Fuel Cell Electric Vehicles (FCEV), and other new energy vehicles (such as those using supercapacitors, flywheels, and other high-efficiency energy storage devices). Battery Electric Vehicles (BEV) are vehicles that rely solely on a single battery as the energy storage power source. They use the battery to store energy, which is then supplied to the electric motor to drive the vehicle. Hybrid Electric Vehicles (HEV) are vehicles with a drive system composed of two or more individual drive systems that can operate simultaneously. The driving power is provided by one or more of these systems depending on the actual driving conditions. HEVs come in various forms due to differences in components, layout, and control strategies. Fuel Cell Electric Vehicles (FCEV) use electricity generated through electrochemical reactions between hydrogen and oxygen in the air, catalyzed in fuel cells, as their primary power source. Essentially, FCEVs are a type of BEV, differing mainly in the working principle of the power battery. Hydrogen engine vehicles are powered by hydrogen engines. Unlike conventional engines that use diesel or gasoline, hydrogen engines use gaseous hydrogen as fuel. These vehicles achieve true zero emissions, releasing only pure water, and offer advantages such as no pollution, zero emissions, and abundant reserves.
8
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.