Where to Get the 4th Year Inspection for a New Car?

1 Answers
DelElla
07/25/25 4:51pm
For the fourth year of a motor vehicle, it falls under regular annual inspection. For passenger vehicles with 7 seats or fewer, you only need to bring the vehicle registration certificate, the owner's ID card, and a valid compulsory traffic insurance policy. The vehicle owner can apply for the inspection compliance mark at the vehicle management office of the registration location within three months before the expiration of the motor vehicle inspection validity period. Overview of Vehicle Inspection: Vehicle inspection refers to the annual examination of vehicles that have been issued formal license plates and registration certificates, conducted according to the "Technical Conditions for Motor Vehicle Operation Safety." The purpose is to check the main technical conditions of the vehicle, encourage enhanced maintenance, ensure the vehicle is always in good condition, and guarantee driving safety. Vehicle Inspection Schedule: For commercial passenger vehicles, inspections are required once a year within the first 5 years. After 5 years, inspections are required every 6 months. For trucks and large or medium-sized non-commercial passenger vehicles, inspections are required once a year within the first 10 years. After 10 years, inspections are required every 6 months. Motor vehicle inspections are divided into initial inspections and regular inspections.
Was this review help?
1
2
Share
More Forum Discussions

What are the consequences of being caught speeding by electronic surveillance and having 12 points deducted?

If you are caught by an electronic surveillance camera and have 12 points deducted, you must report to the local traffic police department within 15 days of the violation. Here is the relevant information: 1. If you exceed the speed limit by more than 50%, you will have 12 points deducted at once and be fined 500 yuan. 2. The fine will double progressively as the speeding increases, up to a maximum of 2,000 yuan for exceeding the speed limit by more than 100%. The driver must report to the traffic management department of the public security authority at the place where the motor vehicle driver's license was issued or where the violation occurred within 15 days. 3. Attend a seven-day course on road traffic safety laws, regulations, and related knowledge. 4. After completing the course, the vehicle management office must administer an exam on road traffic safety laws, regulations, and related knowledge within 20 days. If the exam is passed, the points will be cleared, and the driver's license will be returned. If the exam is failed, the driver must continue attending the course and retake the exam.
16
3
Share

What to Do with China 5 Vehicles Under China 6 Standards?

After the implementation of the China 6 emission standards, China 5 vehicles can still be driven, but the arrival of China 6 will affect the vehicle's resale value. More information about China 6 is as follows: 1. China 6 refers to the phase of the motor vehicle exhaust emission testing standards. Additionally, there is a fuel standard. The fuel standard and the automobile emission standard are two completely different concepts, but they are interdependent. The implementation of the new fuel standard means that fuels that do not meet the standard will be discontinued. 2. Since the release of the China 6 emission standard on December 23, 2016, the testing methods, implementation time, and specific numerical requirements for the sixth-stage light vehicle emissions have also been announced. The China 6 emission standard is set for the content of pollutants in motor vehicle exhaust emissions. 3. Compared to the currently implemented China 5 emission standard, the China 6 standard is more stringent.
8
1
Share

What to Do If the Original Driver's License Continues to Be Used After a Replacement?

Article 63 of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses" stipulates: If a motor vehicle driver's license is lost, the motor vehicle driver shall apply for a replacement to the vehicle management office at the place where the driver's license was issued or elsewhere. After the motor vehicle driver replaces the driver's license, the original motor vehicle driver's license becomes invalid and must not be used further. Therefore, after replacing the driver's license, the original one is automatically invalidated. Additional information: 1. Article 95 of the "Road Traffic Safety Law": If a motor vehicle driven on the road does not display a motor vehicle license plate, does not have an inspection qualification mark or insurance mark, or does not carry the vehicle registration certificate or driver's license, the traffic management department of the public security organ shall detain the motor vehicle, notify the party to provide the corresponding plates, marks, or complete the necessary procedures, and may impose penalties in accordance with Article 90 of this Law. 2. The "Regulations on the Application and Use of Motor Vehicle Driver's Licenses" stipulate: If a motor vehicle driver commits any of the following violations, one point will be deducted.
15
2
Share

What procedures are required for a driver's license refund?

Bring your original ID card to the Vehicle Management Office's certification hall to complete the cancellation procedures. Below is relevant information about the driver's license: 1. Definition: A motor vehicle driver's license is a legal certificate issued by the management department after a person who is legally allowed to learn to drive a motor vehicle has studied, mastered traffic regulations and driving skills, and passed the examination, permitting them to drive a certain type of motor vehicle. 2. Order of examination subjects: Conducted in sequence as traffic regulations and related knowledge (referred to as Subject 1), field driving (Subject 2), road driving (Subject 3), and safety and civilization knowledge (Subject 4). During the examination, if a candidate fails the previous subject, the following subjects will not proceed. Subjects 2 and 3 can be taken once with one retake opportunity. If the retake is still unsuccessful, the examination is terminated. Within the validity period of learning to drive, reapplying for the examination is allowed, with the maximum number of reapplications determined by local traffic management departments, and the interval between examinations must be no less than 10 days.
1
5
Share

Should a scratched tire sidewall be replaced?

Vehicle tires are generally recommended to be replaced every 50,000 to 80,000 kilometers. As long as there are no obvious cracks or aging marks on the tire surface, you can check the distance between the wear indicators in the main drainage grooves and the wear layer. There are also triangular wear indicators on the tire crown. If the wear position is almost level with the wear indicators in the drainage grooves or the wear indicators on the crown, it means the tire needs to be replaced. Below is an introduction about tires: 1. If you want better noise reduction and comfort: It is recommended to choose Michelin. If you prefer better wear resistance and handling, consider Pirelli, Goodyear, or Bridgestone. For balanced performance, Continental is a good choice. Michelin and Continental use silica as an additive, which enhances comfort and noise reduction, while other brands typically use carbon black. If the scratch is on the tire sidewall, examine the deepest part of the damage. If the cords are visible, the tire must be replaced immediately. 2. If the cords are not visible: Monitor the area for any bulging in the following days. If a bulge appears, the tire must be replaced. If there is no bulging and the cords are not visible, and only a small cut is present in the sidewall rubber, you can drive to a tire shop to have the damaged area repaired.
15
1
Share

Where is the engine number located on the Mercedes-Benz GLE43?

The engine number of the Mercedes-Benz GLE43 is located on the driver's side underneath the vehicle. You need to lift the car, remove two underbody panels and a heat shield, and it can be found in the gap between the exhaust and the engine. The meaning of the engine number is as follows: First part: Includes the product series code, generation symbol, and regional or manufacturer code. The manufacturer selects the corresponding letters as needed, but they must be approved and filed by the industry standard regulatory body. Middle part: Consists of symbols for the number of cylinders, cylinder arrangement type, stroke, and cylinder diameter. Rear part: Comprises symbols for structural features and usage characteristics. End part: Distinguishing symbol. When differentiation is needed due to improvements or other reasons within the same product series, the manufacturer selects appropriate symbols to represent this. The rear part and the end part can be separated by a '-'.
10
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.