Where to Get Maintenance After Luxgen Discontinued Production?

1 Answers
StAlaina
07/30/25 4:38am
After Luxgen discontinues production, subsequent maintenance and repairs can be carried out at 4S stores or third-party professional maintenance and repair shops. Below are the specific details about car 4S stores: 1. Sales and After-sales: 4S stores can be divided into sales and after-sales sections. Sales are further categorized into new car sales, used car sales, large customer sales, beauty and accessory sales, etc. After-sales include routine maintenance, insurance accident claims, manufacturer warranty claims, car insurance sales, etc. 2. Brand Dealers: As car brand dealers, 4S stores must adhere to the requirements of the original equipment manufacturer (OEM), including unified store design, standardized management, consistent service standards, unified car brand culture, and uniform market activity themes. Car brand manufacturers also have certain assessments for the operating conditions of 4S stores, as they represent the brand culture and value of the car, serving as the direct channel for users to interact with the car brand.
Was this review help?
14
5
Share
More Forum Discussions

What Causes the Failure of the Driver's Window to Roll Up or Down?

Reasons for the failure of the driver's window to roll up or down include damaged wiring, motor overheating, aging rubber seals, and loss of initial data. Damaged Wiring: If there is a burnt smell or unusual noises inside the door panel when holding down the window button for a long time, it is likely that the window lift motor components are damaged, and immediate repair at a service center is necessary. Motor Overheating: To protect the power supply circuit, most window lift motors are equipped with an overheating protection mechanism. If the components overheat for any reason, the motor will enter an overheating protection state, causing the window to fail to roll up or down. Immediate repair at a service center is required. Aging Rubber Seals: The inability of the window glass to roll up or down is often caused by mechanical jamming. Simply cleaning the guide rails and applying some lubricant can resolve the issue. However, if the problem is due to aging or deformation of the rubber seals, new seals need to be replaced. Loss of Initial Data: Disconnecting the battery or the power or ground wire of the window control module during maintenance of other systems can cause the loss of the window's initialization data, leading to the failure of the window to roll up or down. In this case, the power or ground wire of the window control module needs to be reconnected.
4
5
Share

What does the ECO display mean in Hyundai Mistra?

When the ECO indicator appears on the vehicle, it indicates that the economy mode has been activated. ECO is an English abbreviation derived from Ecology (environmental protection), Conservation (energy saving), and Optimization (power). The ECO mode is further divided into active ECO driving mode and passive ECO driving mode. ECO mode is categorized into active and passive types. The difference lies in the fact that the active type has its own dedicated button, allowing the driver to choose whether to activate it. When the driver presses the ECO mode switch, the dashboard indicator light will illuminate, and the vehicle will automatically adjust settings such as throttle opening, transmission shift logic, and air conditioning output power. The passive ECO mode does not have a dedicated button. When the ECO indicator on the dashboard lights up, it serves merely as a reminder function. The ECO system automatically evaluates driving behavior, and if the current driving operation achieves the optimal fuel supply, the dashboard will simultaneously display the ECO indicator. Most vehicles employ the active ECO driving mode, which comes with its own switch button. Therefore, it can be activated during daily driving. However, there is no need to enable ECO mode when driving at speeds exceeding 120 km/h, during idle parking, in N/P gear, or in manual mode, especially when climbing hills, as it would not reflect the fuel-saving characteristics of ECO mode. Additionally, ECO mode typically becomes ineffective under the following circumstances: When the vehicle speed exceeds 120 kilometers per hour, the system prioritizes speed, causing the ECO mode to deactivate automatically. During idle parking or when in N/P gear or manual mode, the ECO mode may also become ineffective. When high torque output is required, such as when climbing hills, the engine control unit prioritizes ensuring sufficient power to drive the vehicle, and the ECO mode will not function in such scenarios.
7
3
Share

How often should the air filter of the Leiling be replaced?

According to the maintenance manual of the Leiling, the air filter should generally be replaced every 40,000 kilometers or during every other maintenance service. If the driving environment is poor, it is recommended to clean the air filter every 5,000 kilometers to reduce the buildup of throttle sludge. The location of the car's air filter element varies depending on the intake form and the engine structure. It is usually located in the air filter on the engine intake pipe. There are two types of air filters in cars: dry and wet. Dry filters are made of paper or organic materials, while wet filters are made of metal mesh. The function of the air filter is to filter out particulate impurities in the air, ensuring that sufficient clean air enters the cylinders and preventing floating dust from being sucked into the engine, which could accelerate the wear of the piston group and cylinders. Air filter: It is a type of filter, also known as an air filter cartridge, air cleaner, or style. It is mainly used in engineering vehicles, cars, agricultural vehicles, laboratories, sterile operating rooms, and various precision operating rooms as an air filter. During operation, the engine sucks in a large amount of air. If the air is not filtered, the floating dust in the air will be sucked into the cylinders, accelerating the wear of the piston group and cylinders. Larger particles entering between the piston and cylinder can cause severe cylinder scoring, which is particularly serious in dry and sandy working environments. The air cleaner is installed in front of the carburetor or intake pipe to filter out dust and sand from the air, ensuring that sufficient and clean air enters the cylinders. Dirty air cleaner: Using a dirty air cleaner while driving can cause insufficient engine intake, incomplete fuel combustion, leading to unstable engine operation, reduced power, and increased fuel consumption. Therefore, the air cleaner must be kept clean. The car air cleaner is a device that removes particulate impurities from the air. It consists of one or several air filter components, and its main function is to filter out harmful impurities in the air before they enter the cylinders to reduce early wear of the cylinders, pistons, piston rings, valves, and valve seats. Therefore, before air enters the cylinders, it must pass through the fine filtration of the air cleaner. Notes about air filters: An air filter that has been in use for some time is more efficient than a new one. This is because the impurities already adsorbed by the air filter help it capture more tiny dust particles. A dirty-looking air filter does not necessarily mean it is no longer functioning properly. The driving time or mileage of the vehicle is only a reference. Whether to replace the filter depends on the actual situation, such as whether it can no longer allow sufficient air to pass through. The air cleaner must ensure that it filters out impurities in the air while allowing enough air to enter the engine.
14
3
Share

What are the engine codes for Audi?

Audi's 1.4-liter turbocharged engine is coded as EA211, while the 2.0-liter turbocharged engine is coded as EA888. Audi is a premium luxury brand under the Volkswagen Group, and most Audi vehicles utilize Volkswagen engines, though not identical. The majority of Audi's sedans and SUV models are equipped with either the 1.4-liter or 2.0-liter turbocharged engines, with the latter available in different power outputs due to varying tuning. Audi's engines are designed to deliver greater power and torque while simultaneously improving fuel efficiency and reducing emissions.
17
0
Share

Which company owns Weilan?

Currently, there is no Weilan car, but there is NIO, which belongs to NIO Inc. Here are the specific details about NIO: 1. NIO is a Chinese automotive brand, established in November 2014, with its headquarters in Shanghai. 2. NIO is a global smart electric vehicle company that focuses on producing high-tech, intelligent, and electric vehicles. 3. NIO's corporate philosophy is to create fully intelligent electric vehicles, which not only save resources and protect the environment but also provide users with a convenient, comfortable, and intelligent driving experience.
9
0
Share

What type of suspension does the Porsche 911 use?

The Porsche 911 utilizes MacPherson strut independent suspension and multi-link independent suspension, with electric power steering. The Porsche 911 is a supercar under the Porsche brand, featuring a family-style design language in its exterior. The oval-shaped headlight clusters are a distinctive and recognizable characteristic, equipped with matrix LED lighting. The 2020 Porsche 911 is powered by a 3.0T engine, paired with an 8-speed dual-clutch transmission. The 3.0T engine delivers a maximum output power of 283 kW and a peak torque of 450 Nm, with a top speed of 293 km/h and a 0-100 km/h acceleration time of 4.2 seconds.
14
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.