Where to Get a Replacement Car Key When Lost?

1 Answers
AdrielLee
07/29/25 4:08pm
When a car key is lost, there are generally two methods to get a replacement: one is to go directly to a car 4S dealership, and the other is to visit an auto parts market. Below is more related information: 1. Differences between going to a 4S dealership and an auto parts market: The biggest difference between going to a 4S dealership and an auto parts market is the price. At a 4S dealership, even an ordinary key can cost several hundred to over a thousand yuan, and some high-end keys may even cost tens of thousands. In contrast, the auto parts market has a price advantage, typically costing at least half the price of a 4S dealership. 2. Getting a key at a 4S dealership is more reliable: However, price isn't the only factor to consider; the method of operation is also important. A 4S dealership creates a brand-new smart car key. The lost key's code is invalidated in the system, and a new code is generated and activated. This method is safer because even if someone finds the lost key, it will no longer work to unlock the car. On the other hand, the auto parts market uses a method of cracking to create a key identical to the lost one. While this key can unlock the car and start the engine, there is a risk: if someone else finds the lost key, they can still use it to open the car. Therefore, it is recommended to go to a 4S dealership for a replacement key. Although the price is higher, it is more reliable and eliminates safety risks.
Was this review help?
8
2
Share
More Forum Discussions

How long does the battery of a car key generally last?

Generally, the battery life of a remote key is about 2-3 years, depending on the frequency of use. Different car models may vary, so it's difficult to determine the exact replacement time. Don't panic if the battery runs out. Most remote keys come with a spare mechanical key inside, and some have a button to automatically pop it out. Here are some precautions regarding the use of car keys: 1. Do not place it with electronic devices: Since smart keys use low-intensity radio waves, they may not function properly in the presence of magnetic interference. 2. Avoid dropping or throwing it: Smart keys are most vulnerable to being dropped from a height. While the outer shell is usually sturdy, the internal circuitry is less resistant to impact and can be easily damaged by severe collisions. 3. Do not leave the spare key inside the car: If a car key is lost due to improper storage, it can cause a lot of trouble, especially for smart keys. Once lost, not only does it need to be replaced, but it also requires re-matching with the car's computer system.
14
4
Share

What Could Cause Excessive Oil Pressure?

There are three main causes of excessive oil pressure. Below are the related reasons: 1. Excessive oil viscosity. The viscosity of the oil is closely related to its quality. Higher viscosity means better resistance to high temperatures, and vice versa. However, higher viscosity is not always better. It's essential to use an oil grade that matches your engine. 2. Pressure relief valve blockage or improper adjustment. To prevent excessive oil pressure in the lubrication system, which can increase engine power consumption and cause leaks at sealed connections in the oil circuit, a pressure relief valve is installed in the main oil passage or oil pump. Its function is to limit the oil pressure in the lubrication system to ensure it does not exceed the specified value. Therefore, a faulty pressure relief valve is one of the causes of excessive oil pressure. 3. Oil filter blockage. The oil filter is a critical component for filtering oil. If it becomes blocked, the consequences are similar to those of a blocked pressure relief valve. Therefore, it's important to regularly inspect and maintain the oil and filter, ensuring the quality of the added oil meets the required standards.
13
3
Share

What to Do If Novice Drivers Tend to Cross Lane Lines?

Solutions for novice drivers who tend to cross lane lines: While driving, try to stay in the center of the lane, leaving about 60 centimeters of space on both sides. When your line of sight aligns with the intersection of the dashboard and the pillar and coincides with the center line, the car body is exactly 60 centimeters away from the center line. Here are some related details: 1. Lines that novice drivers must not cross include solid white lines, solid yellow lines, etc. Dashed white lines and solid white lines are the most common markings on roads. Dashed white lines and solid white lines are used to separate lanes traveling in the same direction. In sections with dashed lines, actions like changing lanes or overtaking are allowed. However, solid white lines, such as those on bridge roads, do not permit crossing or overtaking. If you happen to cross a solid line under a surveillance camera, you will be penalized. 2. Solid yellow lines are used to separate lanes traveling in opposite directions. Single solid yellow lines are used for single lanes, while double solid yellow lines are used for multiple lanes. Whether single or double solid lines, crossing or pressing on them is not allowed. Therefore, actions like overtaking or making U-turns are considered violations. Dashed yellow lines are commonly seen on narrow roads where lane borrowing is often necessary due to road conditions. In areas with dashed yellow lines, actions like crossing, borrowing lanes, overtaking, or making U-turns are not considered violations.
4
1
Share

What size tires fit 16-inch rims?

16-inch rims are compatible with tires ranging from 185 to 275mm in width. Tires are circular elastic rubber products mounted on metal rims, designed for various vehicles or machinery to roll on the ground. They support the vehicle body, absorb external shocks, maintain contact with the road surface, and ensure driving performance. The functions of tires include: 1. Supporting the entire weight of the vehicle, bearing the load, and transmitting directional forces and moments; 2. Working with the vehicle suspension to cushion impacts during driving and dampen resulting vibrations; 3. Protecting vehicle components from severe vibrations and premature wear, adapting to high-speed performance, and reducing driving noise; 4. Transmitting traction and braking torque, ensuring good adhesion between the wheels and the road surface, and enhancing the vehicle's power, braking, and off-road capabilities.
10
0
Share

What is a starter composed of?

Modern starters consist of three main components: the electric motor, the transmission mechanism, and the control device. Specifically designed to start the engine, starters require high torque and therefore draw a large current, often reaching hundreds of amperes. This characteristic distinguishes them from generators. Below is an introduction to modern starters: 1. The DC starter is composed of a DC series-wound motor, an operating mechanism, and a clutch mechanism. Designed specifically to start the engine, it requires high torque and draws a large current, often reaching hundreds of amperes. The starter uses a DC series-wound motor, with both the rotor and stator wound with relatively thick rectangular-section copper wire. The drive mechanism employs a reduction gear structure, while the operating mechanism uses an electromagnetic attraction method. 2. Transmission mechanism (engagement mechanism): During engine startup, it engages the starter's drive gear with the flywheel ring gear to transmit the starter's torque to the engine crankshaft. After the engine starts, it automatically disengages the gear. 3. Electromagnetic switch: The starter's control device, which controls the circuit's on/off state.
18
5
Share

Can Spark Plugs Be Reused After Cleaning?

If the wear level is low after cleaning, spark plugs can continue to be used. Generally, they should be replaced after driving 40,000 to 60,000 kilometers under normal maintenance conditions. However, this may vary depending on the brand and engine type, so it is recommended to follow the user manual. Platinum spark plugs should be replaced at 40,000 kilometers, ordinary nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers. Steps for replacing spark plugs: Open the engine hood, lift the plastic cover of the engine, and remove the high-voltage wires. Mark each cylinder's position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. While removing them, check for external debris such as leaves or dust and ensure they are thoroughly cleaned. Place the new spark plug into the spark plug hole, hand-tighten it a few turns, and then use the socket to tighten it further. Reinstall the high-voltage wires in the firing order and secure the cover.
18
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.