Where to Find the Spark Plug Model Number?

1 Answers
Kyle
07/30/25 8:29am
Generally, the ceramic part of a spark plug is marked with the model number. What is a Spark Plug: A spark plug is a crucial component of the ignition system in a gasoline engine. It introduces high voltage electricity into the combustion chamber and generates a spark by jumping across the electrode gap, thereby igniting the combustible air-fuel mixture in the cylinder. Components of a Spark Plug: A spark plug mainly consists of a terminal nut, insulator, terminal stud, center electrode, side electrode, and metal shell. Types of Spark Plugs: Main types of spark plugs include: standard spark plugs, projected insulator spark plugs, electrode spark plugs, seat-type spark plugs, surface-gap spark plugs, and surface-discharge spark plugs. Location of Spark Plugs: Spark plugs are installed on the side or top of the engine. In early designs, spark plugs were connected to the distributor via ignition cables. Over the past decade, most car engines have adopted direct connection between ignition coils and spark plugs.
Was this review help?
9
0
Share
More Forum Discussions

What Causes Frost on the Inside of Car Windows in Winter?

The reason for frost forming on the inside of car windows in winter is the temperature difference between the inside and outside of the vehicle. The interior temperature is higher than the outdoor temperature, causing the car windows to come into contact with the colder external environment. This results in the condensation of moisture from the cabin air on the glass, forming frost. Solutions to prevent frost on car windows in winter include: 1. Applying anti-fog spray, which forms a transparent protective film on the glass; 2. Using the air conditioning's dehumidification function to reduce air humidity; 3. Utilizing the warm air function of the air conditioning to minimize the temperature difference and eliminate frost on the windows. Methods to avoid frost on car windows in winter are: 1. Applying soapy water, detergent, ethylene glycol, glycerin, or polyvinylpyrrolidone; 2. Coating with thick plastic film treated with silicon and then applying hydroxyethyl methacrylate silicone; 3. Applying a solution of carboxymethyl cellulose and salt to the glass.
1
5
Share

How to Replace Brake Fluid in a Car?

Car brake fluid replacement steps are: 1. Park the vehicle on level ground and turn off the engine, open the hood and drain the fluid from the reservoir; 2. Use a funnel to fill the reservoir with new brake fluid; 3. Use a jack to lift the vehicle, starting with the rear wheels to remove the tires; 4. Remove the rubber dust cap on the brake caliper; 5. Use a wrench to loosen the bleeder screw and attach a rubber tube to it, connecting it to a drain bottle; 6. Go inside the car and press the brake pedal while observing the fluid drainage until the fluid level in the reservoir under the hood reaches the lower limit; 7. Start the vehicle and test the brakes in a relatively safe area.
2
5
Share

Is the Ford Edge compliant with China 6 emission standards?

Ford Edge is compliant with China 6 emission standards. China 6 refers to the regulations on the emission limits of harmful gases such as carbon monoxide, hydrocarbons, nitrogen oxides, particulate matter, and soot from vehicle exhaust. The Ford Edge is a 5-door, 5-seat SUV with body dimensions of 4878mm in length, 1925mm in width, and 1734mm in height, a wheelbase of 2850mm, and a fuel tank capacity of 69 liters. It is equipped with a 2.0L turbocharged engine and an 8-speed automatic transmission, delivering a maximum power of 180 kW at 5500 rpm and a maximum torque of 390 Nm between 2500 and 3500 rpm.
16
4
Share

What are the techniques for shifting gears in a manual transmission?

Techniques for shifting gears in a manual transmission: 1. Take a five-speed car as an example, start in first gear, and shift to second gear when the speed reaches 10 km/h; 2. Shift to third gear when the speed is above 20 km/h but below 40 km/h; 3. Shift to fourth gear when the speed reaches above 40 km/h but below 55 km/h; 4. Shift to fifth gear when the speed reaches above 70 km/h. For cars with more than five gears, you can shift up one gear for every increase of about 10 to 15 km/h in speed; 5. Pay attention to the engine RPM when shifting gears, and it's best to shift around 2500 RPM; 6. If you notice the vehicle shaking while driving, it means the engine is operating at a low speed with a high gear. You should quickly downshift according to the speed, while ensuring proper coordination between the throttle and clutch; 7. Press the clutch pedal all the way down, then release the throttle, and quickly shift to the corresponding gear. Generally, the reverse gear position is located at the front left or rear right, and different vehicles may have different methods for engaging reverse gear. A manual transmission, also known as a manual gearbox, is a car that adjusts speed by manually moving the gear lever to change the gear engagement position inside the transmission, altering the gear ratio to achieve the desired speed. The gear lever can only be moved when the clutch is depressed.
13
1
Share

How to turn on the high beam lights on an Audi A6?

Audi A6 turns on the high beam lights by: 1. There is a switch on the left side of the driver's compartment, turn the switch to turn on the headlights; 2. Press down the handle on the left side of the steering wheel to turn on the high beam lights. The Audi A6 is a mid-size to large car. Taking the 2021 Audi A6 as an example, its body dimensions are: length 4951 mm, width 1886 mm, height 1483 mm, wheelbase 2925 mm, and fuel tank capacity 73 liters. The 2021 Audi A6 is equipped with a 2.0-liter turbocharged engine, with a maximum power of 140 kW and a maximum torque of 320 Nm.
1
1
Share

Does the Golf 7 have tire pressure monitoring?

Golf 7 is equipped with tire pressure monitoring, which is controlled by the ABS system. Its functions include: 1. Providing timely alerts when there are signs of tire danger, reminding the driver to take appropriate measures to avoid accidents; 2. Keeping the tires operating within the specified pressure and temperature range, reducing tire damage and extending their service life; 3. Monitoring tire pressure in real-time to avoid abnormal tire pressure and reduce wear on the suspension system. The Golf 7 is a compact car under FAW-Volkswagen. Taking the 2021 Golf as an example, its body dimensions are: length 4296mm, width 1788mm, height 1471mm, with a wheelbase of 2636mm.
9
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.