Where to Find the Manufacturing Date of Car Tires?

2 Answers
PiperLee
07/24/25 1:12pm
Car tire dates are located on the outer side of the tire. More information about car tire dates is as follows: 1. The car tire date consists of four digits "AABB". The first two digits "AA" represent the week of the year, and the last two digits "BB" represent the year. 2. The 11-digit number and letters immediately following the "DOT" letters on the tire sidewall indicate the identification number or serial number of the tire. The last four digits of the serial number represent the manufacturing date of the tire. 3. The format of the tire manufacturing date code: the first two digits indicate the production week, and the last two digits indicate the production year. For example, if the last four digits of DOT are 0807, it means the tire was produced in the 8th week of 2007, i.e., late February 2007. 4. The manufacturing dates of all four car tires should be consistent and not significantly different from the car's manufacturing time.
Was this review help?
14
1
Share
LaKarter
08/11/25 7:16am
I learned when changing tires that the date is found on the sidewall! Usually near the rim, look closely for a small oval or square printed on the sidewall with four digits like '1623', which indicates the tire was produced in the 16th week of 2023. Key points: the last two digits represent the year, and the first two digits represent the week number—don’t mistake it for other codes. Why is this important? Tires stored or used for over six years can age and become brittle, affecting safety. I always clean the sidewall while washing the car to check the date. When buying used tires or a new car, I also pay attention to the production date to avoid tires that have been in stock for too long. Other tips: While you're at it, check the tread wear depth and any cracks. Proper maintenance can extend tire life by several years. I’ve made it a habit to do this before every long trip—it gives me peace of mind.
Was this review help?
18
4
Share
Expand All
More Forum Discussions

What is the concept of a liquidation car?

Liquidation cars refer to vehicles disposed of after a 4S dealership goes out of business. These cars are sold as bare vehicles without after-sales service, and maintenance needs to be done at other 4S dealerships. When a 4S dealership undergoes normal liquidation and closes down, all inventory is sold at discounted wholesale or retail prices. Vehicles sold this way are priced slightly lower than normal, but not significantly lower than regular promotional prices. Purchasing such liquidation cars is generally problem-free as they come with complete documentation. It's important to note that after a 4S dealership closes, other dealers of the same brand can still provide warranty services. Therefore, even if the 4S dealership closes, as long as the car manufacturer remains operational, the vehicle's warranty won't be affected. According to legal regulations, the warranty should be covered by either the manufacturer or the seller. If the seller goes out of business, you can contact the manufacturer directly.
3
5
Share

What is the wheelbase of the Hafei Saibao?

The wheelbase of the Hafei Saibao is 2440mm, with overall dimensions of 3945*1695*1695mm in length, width, and height. Both front and rear tires are sized at 185/65R147. Below are the detailed specifications of the Hafei Saibao: In terms of power, the vehicle is equipped with a 1.5L naturally aspirated engine and a 5-speed manual transmission. It delivers a maximum power of 76kw, a maximum torque of 130Nm at 4500RPM, and a maximum horsepower of 103PS, with peak power achieved at 6000RPM. Regarding wheel brakes, some or all models of the Hafei Saibao feature a handbrake for the parking brake, front disc brakes, and rear drum brakes. The Hafei Saibao's front suspension is a MacPherson independent suspension, while the rear suspension is a multi-link independent suspension.
15
3
Share

What Causes the Abnormal Noise When a Car Turns?

Abnormal noises when a vehicle turns may be caused by the turn signal reset mechanism, aging of the steering tie rod ball joint, steering gear failure, damaged stabilizer bar, or friction between plastic components. Specific causes and solutions: Turn signal reset: If the turn signal is activated while turning, the noise might come from the rebound latch of the automatic reset mechanism. This situation is generally not a cause for concern. Aging steering tie rod ball joint: If the steering tie rod ball joint is aging, it can cause steering wheel vibration and noise. The usual solution is to replace the steering tie rod ball joint and perform a wheel alignment afterward. Steering gear failure: If the noise during steering is very loud, it might be due to excessive gear clearance in the steering gear, which requires replacement of the steering gear. Damaged stabilizer bar: Loose or damaged stabilizer bar bushings can cause noise not only during steering but also when driving on uneven roads. Loose stabilizer bar bushings can often be fixed by adding shims. Friction between plastic components: Since steering wheels are typically made of plastic, colder temperatures can harden the plastic, potentially causing friction noises. Regular inspection of plastic components and timely replacement are necessary in such cases.
9
2
Share

What Causes Loud Engine Noise During Acceleration?

Engine noise during acceleration can be caused by exhaust pipe leaks, dirty throttle valves, engine misfires, or transmission issues. Exhaust pipe leaks: When there is a leak in the intake or exhaust pipe, the vehicle produces a loud roaring sound as the exhaust flow rate increases during acceleration. Dirty throttle valve: During acceleration, the engine load increases, requiring the throttle valve to open wider and more fuel to be injected. If the throttle valve fails to open to the optimal position due to dirt buildup, it can result in poor air-fuel mixture ratio, causing noise during acceleration. Engine misfire: Engine misfire refers to one or more cylinders not functioning properly, typically manifesting as insufficient power, severe exhaust pipe vibration, and clearly audible "popping" or "thumping" sounds from the engine. Transmission issues: The buzzing sound during acceleration may not always come from the engine; it could also be due to worn transmission bearings or insufficient lubrication fluid, leading to friction. To address loud engine noise during acceleration, you can replace the exhaust pipe, clean carbon deposits from the throttle valve, inspect the condition of ignition coils and spark plugs in each cylinder, add lubrication fluid to the transmission, or install soundproofing equipment in the vehicle.
2
1
Share

Can Car Covers Provide Sun Protection?

Car covers can provide sun protection. They are made from specialized sun-resistant fabrics, using materials that can block UV transmission, reflecting or absorbing ultraviolet rays. Other functions of car covers: Car covers can protect the vehicle's paint and prevent accelerated aging of car interiors and tires due to UV exposure. They also offer protection against acid rain and dust. In winter, they can prevent frost and snow buildup on the car. Additionally, they provide anti-theft benefits and are flame-retardant, protecting the car body from damage caused by fireworks or firecrackers. Types of car covers: Single-layer car cover: This type offers excellent dust and sun protection. Its silver color provides effective UV resistance. These covers are lightweight, weighing about 1kg, but have a relatively short lifespan of about 2 years. They are not waterproof or scratch-resistant. Double-layer flame-retardant car cover: These covers offer sun protection, dust resistance, waterproofing, scratch resistance, and flame retardancy. The fabric uses a thermal lamination technology that combines two different functional materials, then employs high-tech double-coated fabric for precision stitching. These covers have a longer lifespan, typically over 3 years, with a moderate weight of about 1.5kg. Nano-material car cover: Made from nano flame-retardant materials, these covers provide outstanding dust, sun, rain, and scratch protection, along with excellent flame retardancy. They are relatively lightweight, usually around 2kg, and have a long lifespan of 4-5 years.
7
2
Share

What Happens When Speed and Gear Don't Match?

If the speed is relatively high while the gear is low, the car is prone to phenomena such as weak acceleration, sluggish throttle response, and jerking. Conversely, if the speed is low while the gear is high, the car is more likely to stall or shake during driving. In actual driving, prolonged use of gears that don't match the speed will increase wear between the transmission gears, leading to larger gear meshing gaps and thereby reducing the transmission's lifespan. Speed ranges corresponding to each gear in a manual transmission: First Gear: The starting gear, used when the car moves from a standstill or climbs steep slopes, with speeds generally around 10 km/h. Second Gear: The driving gear. It serves as a transitional gear for acceleration after starting or for low-speed driving, with speeds generally around 20 km/h. Third Gear: The acceleration gear. From this gear onward, you can coordinate with the throttle to accelerate, increasing the car's speed to a certain level. It's used at speeds between 20-40 km/h and is commonly used for city driving. Fourth Gear: The medium-high speed driving gear. This is generally the highest gear used on urban roads except for elevated sections, typically employed at speeds around 60-70 km/h depending on the vehicle. Fifth Gear: The high-speed gear. Used only on elevated roads, highways, etc., generally at speeds of 80 km/h or above.
6
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.