Where to Find BMW PIN Code?

Is the Tiguan equipped with a dry or wet dual-clutch transmission?

Tiguan is equipped with a wet dual-clutch transmission. Below is a partial introduction to dry and wet dual-clutch transmissions: 1. The difference between dry and wet dual-clutch transmissions lies in the connection medium between the driving and driven plates: dry dual-clutch transmissions rely on air for transmission, while wet dual-clutch transmissions use oil. 2. The advantage of dry dual-clutch transmissions is their high mechanical transmission efficiency. 3. The advantage of wet dual-clutch transmissions is their ease of operation and lower failure rate. Below is a partial introduction to the Tiguan: 1. Place of production: The Tiguan is a car produced by Shanghai Volkswagen. 2. Fuel tank capacity and basic configuration: The fuel tank capacity is 63L, equipped with front seatbelt reminder, child seat interface, and engine electronic anti-theft system.

5

1

Share

What are the differences between Emgrand GC7 and Emgrand EC7?

The differences between Emgrand GC7 and Emgrand EC7 include: different exterior dimensions, different engines, and different maximum torque. The specific details are as follows: Different exterior dimensions: Classic Emgrand: Length × Width × Height (mm) 4635 × 1789 × 1470. Emgrand EC7: Length × Width × Height (mm) 4632 × 1789 × 1470. Different engines: Classic Emgrand: 98kW (1.8L naturally aspirated) engine. Emgrand EC7: 1.5L inline 4-cylinder naturally aspirated engine. Different maximum torque: Classic Emgrand: Maximum torque (Nm/rpm) 170/4400. Emgrand EC7: Maximum torque (Nm/rpm) 140/4400.

14

1

Share

What does 'nosignal' mean on a BMW display?

When a BMW displays 'nosignal', it means there is no signal, indicating that the display is not receiving any signal from the main unit and therefore cannot show any content. Reasons for 'nosignal' appearing: Interference with the operation of the reversing camera may occur when the car is first started; the probe of the reversing camera may be damaged or the photosensitive signal of the chip may be blocked due to prolonged use; poor contact in the wiring, you can check the connection between the reversing radar wiring and the vehicle's installed wiring; if the reversing camera on the car is part of a navigation and reversing camera integrated unit, the failure of the reversing camera function may be due to a damaged navigation card slot. Introduction and functions of the reversing camera: The reversing camera, also known as a parking assist system, or reversing visual system, or vehicle monitoring system, is widely used in various large, medium, and small vehicles for reversing or driving safety assistance.

18

2

Share

How to install seat covers on the rear seats of the Lavida?

The steps to install seat covers on the rear seats of the Lavida are as follows: First, locate the two buckles under the rear seats, then lift the left and right sides of the seats firmly upwards. After placing the seat covers, press them down directly onto the corresponding buckles to complete the installation. The Lavida (LAVIDA) is an independently developed A-segment car by Shanghai Volkswagen. It measures 4605mm in length, 1765mm in width, and 1460mm in height, with a wheelbase of 2610mm. In terms of power, the Lavida is equipped with a 1.6L inline four-cylinder multi-point fuel injection engine, delivering a maximum power of 77 kW and a maximum torque of 155 Nm. The front suspension features a MacPherson strut independent suspension, while the rear suspension uses a torsion beam non-independent suspension.

18

3

Share

How to Set the Automatic Door Lock for Sagitar?

To set the automatic door lock for the Sagitar, follow these steps: First, press the brake pedal of the Sagitar, then shift the gear lever to P position and release the brake pedal. Next, press the one-touch start button continuously, close all four doors, and hold down the lock button on the driver's door for more than 10 seconds to complete the setup. The Sagitar is a compact car under FAW-Volkswagen, with dimensions of 4544mm in length, 1760mm in width, and 1461mm in height, and a wheelbase of 2578mm. It is equipped with three types of engines: 1.4TSI, 1.8TSI, and a 1.6L naturally aspirated engine.

12

4

Share

What are the steps to clear the maintenance reminder for a Polo?

Clearing the maintenance reminder for a Polo involves the following steps: 1. Insert the car key but do not turn it yet; 2. Firmly press the mileage reset button located below the speedometer and continue holding it for the next steps; 3. While holding the reset button, turn the key to the self-check position without starting the engine, still keeping the button pressed; 4. Hold the reset button for more than 10 seconds, then release it to successfully clear the reminder. The Polo is a compact car under SAIC Volkswagen, with body dimensions of 3970mm in length, 1682mm in width, and 1462mm in height, and a wheelbase of 2470mm. It is equipped with Volkswagen's high-power version EA211 1.4T turbocharged engine, delivering a maximum power of 150ps and a maximum torque of 250nm, paired with a 7-speed DSG dual-clutch transmission.

17

3

Share

Where to Find BMW PIN Code?

Is the Tiguan equipped with a dry or wet dual-clutch transmission?

What are the differences between Emgrand GC7 and Emgrand EC7?

What does 'nosignal' mean on a BMW display?

How to install seat covers on the rear seats of the Lavida?

How to Set the Automatic Door Lock for Sagitar?

What are the steps to clear the maintenance reminder for a Polo?

What does the BMW 480a11 permanent fault mean?

How to Remove the Grille of the Buick New Excelle?

Will an automatic transmission car move without pressing the accelerator when in gear?

How to Start the Car When the Keyless Entry Key is Dead?