Where to Exchange Invoices for Chengdu Metro?

1 Answers
DiAngelina
07/23/25 11:18pm
Subway reimbursement invoices are generally obtained at the customer service center of the destination station. Passengers need to present their purchased tickets at the station's customer service center before exiting to request an equivalent invoice. If you exit the station, the single-journey ticket will be reclaimed by the gate, and the customer service center will not be able to verify the passenger's exact ticket purchase information. How to Prevent Fraud in the Rail Transit Area: When riding the rail transit, passengers should never be tempted by small gains. If you encounter strangers who claim to have found cash, gold jewelry, or other valuables and propose sharing them, or who try to sell you supposedly antique treasures at low prices, or if you experience issues with your transportation card when entering the station and a seemingly helpful stranger offers assistance, remain vigilant. First, if you encounter difficulties, seek help from certified staff. Second, report any suspicious individuals to the authorities promptly. Third, do not disclose personal information to strangers, such as your home address, ID card number, mobile phone number, bank account details, or passwords.
Was this review help?
7
5
Share
More Forum Discussions

What is the normal tire pressure for the X-Trail?

The normal tire pressure range for the X-Trail is 2.4-2.5 bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2 bar in winter and reduced by 0.1 bar in summer. This data is based on the international GBT2978-2008 standard. The X-Trail 2.5L high-end model is equipped with a tire pressure monitoring alarm system, which can be viewed on the dashboard. While driving, the tire pressure monitoring system automatically monitors the tire pressure and displays specific values. Other models can only check the tire pressure using external instruments. Generally, a tire pressure exceeding 2.8 bar is considered too high, and a tire pressure below 2.0 bar is considered too low. Hazards of overinflated tires: Reduced friction and adhesion of the tires, affecting braking performance; causes steering wheel vibration and deviation, reducing driving comfort; accelerates wear on the central tread of the tire, shortening its lifespan; increases vehicle vibration, indirectly affecting the lifespan of other components; causes excessive stretching and deformation of the tire cords, reducing elasticity and increasing the load on the vehicle while driving. Hazards of underinflated tires: Increased friction coefficient with the road surface, leading to higher fuel consumption; makes the steering wheel heavy and prone to deviation, posing safety risks; increases movement in various parts of the tire, causing abnormal heat due to excessive rolling; reduces the functionality of the cords and rubber, leading to delamination or cord breakage and excessive friction with the rim, damaging the tire bead and causing abnormal wear; multiplies friction between the tire and the ground, rapidly increasing tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may result in a tire blowout. If the tire pressure monitoring indicator lights up (a yellow symbol with an irregular circle, no stamp on top, four small spikes at the bottom, and an exclamation mark inside), there are generally three possible reasons: Abnormal tire pressure: Usually triggers an alarm when below 1.8 bar or above 3.0 bar. In this case, the tires need to be checked and the pressure adjusted. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure is not reset in time, the system will still record the previous data, causing the tire pressure monitoring indicator to light up. Simply reset the tire pressure to resolve this issue. Damaged tire pressure sensor: The tire pressure sensor, used to monitor tire pressure, is installed inside the tire and connected to the tire inflation valve. If the sensor is damaged during driving, it can also trigger the tire pressure warning light. For sensor damage, the only solution is to replace it with a new one.
12
0
Share

What is the battery model of the Sylphy?

Sylphy's battery model is 55B24L. The battery is an essential part of a car and can be divided into traditional lead-acid batteries and maintenance-free batteries. It has the advantages of not requiring any liquid addition, easy connection to terminals, and long power storage time. The following are the functions of the battery: 1. When starting the engine, it provides a strong starting current (about 10A) to the starter; 2. When the generator is overloaded, it can assist the generator in supplying power to electrical equipment; 3. When the engine is idling, it supplies power to electrical equipment; 4. The battery is also a large-capacity capacitor that can protect the car's electrical appliances; 5. When the generator's terminal voltage is higher than the electromotive force of the lead battery, it converts part of the electrical energy into chemical energy for storage, that is, charging.
16
0
Share

What is the minimum ground clearance of the 10th-generation Accord?

The minimum ground clearance of the 10th-generation Accord is 100mm, which is caused by the lower rear suspension. Here is an introduction to the suspension: 1. The suspension refers to all the force-transmitting connection devices between the car's frame and axle. 2. Its function is to transmit the forces and torques acting between the wheels and the frame, and to cushion the impact force transmitted from uneven road surfaces to the frame or body, reducing the resulting vibrations to ensure smooth driving. Extended content: The 10th-generation Accord adopts a rear multi-link independent suspension. Due to the use of a subframe structure, the multi-link design is more flexible, and the subframe bears most of the impact force, providing strong cushioning.
3
4
Share

Does the Envision require decoding when replacing the battery?

The Envision requires the vehicle's computer to decode when replacing the battery; otherwise, even if a new battery is installed, it still won't charge. Precautions for battery replacement: Visually inspect the battery casing for cracks, corrosion, or signs of burning; use a voltmeter to measure the voltage between the casing and ground, ensuring it does not exceed 20V, as higher voltages pose an electric shock risk; after installing the new battery, use a Mercedes-Benz-specific computer to perform a battery test run. Car battery maintenance tips: Avoid parking the car in an open parking lot for extended periods. If long-term parking is necessary, remove the battery to prevent freezing damage; car batteries need regular charging, as prolonged disuse leads to gradual self-discharge and eventual failure. Therefore, start the car periodically to recharge the battery.
14
4
Share

How to Lift the Wiper of Sagitar?

Steps to lift the wiper of Sagitar: 1. First, activate the winter mode by turning the ignition switch to the end without starting the engine. 2. Then return to the off position and pull the wiper switch downward once, and the wiper will lift up. Extended content: 1. The electric windshield wiper is driven by a motor and generally consists of a wiper arm, wiper blade assembly, rubber blade, blade holder, blade support, wiper arm spindle, wiper base plate, motor, reduction mechanism, drive linkage, drive linkage hinge, wiper switch, and wiper switch knob. 2. Of course, wipers equipped with a wiper ECU also include an electronic control unit (ECU). The electric windshield wiper is driven by a motor, with the left and right wiper blades pressed against the outer surface of the windshield by the wiper arms. The motor drives the reduction mechanism to rotate, and through the drive linkage system, it performs reciprocating motion, causing the wiper arms and blades to swing left and right to wipe the windshield.
4
2
Share

What is the length of the Mazda Axela model?

Here is an introduction to the Mazda Axela model: 1. The length of the Mazda Axela sedan version has been increased, and the wheelbase of both versions has been extended by 25mm compared to the current model. 2. The dimensions of the hatchback version are 4459mm in length, 1797mm in width, 1440mm in height, with a wheelbase of 2725mm. 3. The dimensions of the Mazda 3 Axela sedan version are 4662mm in length, 1797mm in width, and 1445mm in height, with the same wheelbase. Here is additional information about the Mazda Axela: 1. Advantages of the Mazda Axela: The powertrain is excellent, featuring a 1.5-liter four-cylinder naturally aspirated engine paired with a 6-speed automatic transmission, maximizing power output efficiency. 2. Outstanding handling: The steering system is perfectly tuned, offering precise control. Even when taking corners without deceleration, the body remains stable with no lateral movement or noticeable sway. 3. Consistently low fuel consumption: Approximately 6.5 liters per 100km in urban areas and around 6.2 liters per 100km on highways, making it an ideal choice for daily commuting. 4. Disadvantages: Regarding auxiliary features, the car is equipped with a keyless start function (so-called one-button start). However, keyless start and keyless entry should ideally be paired for convenience, eliminating the need for drivers to take out their keys. 5. Space issues: As a compact sedan, the rear space is not particularly spacious, and there is a noticeable hump in the middle of the floor, making the car less advantageous in terms of space.
8
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.