Where to Collect the Vehicle Inspection Sticker and What to Bring?

1 Answers
DeAlejandro
07/30/25 6:52am
To collect the vehicle inspection sticker, you need to bring the vehicle registration certificate, compulsory traffic insurance (CTI), and your ID card to the vehicle management office. Below is relevant information about auto insurance: 1. Compulsory Traffic Insurance (CTI): A mandatory national auto insurance that provides coverage for the other party's property and personal safety. 2. Special Coverage for Non-Deductible: The most important aspect of this insurance is its absolute deductible-free feature. 3. Vehicle Damage Insurance: This insurance primarily covers the vehicle itself. If the car is involved in an accident or suffers damage due to natural disasters, these losses can be compensated by the insurance company through vehicle damage insurance. 4. Third-Party Liability Insurance: This insurance mainly covers the personal injury and property damage of a third party in a traffic accident. To supplement the coverage limit of CTI, a comprehensive third-party liability insurance is necessary.
Was this review help?
13
4
Share
More Forum Discussions

What is the Standard for a Three-Stage Car Wash Sedimentation Tank?

The standard for a three-stage car wash sedimentation tank is that the masonry strength must meet requirements, the slope must be strictly controlled, and reverse slopes are not allowed. Below is relevant information about three-stage sedimentation tanks: 1. Principle: Sedimentation tanks utilize the principle that when the downward sedimentation speed of suspended impurity particles in the water flow is greater than the flow velocity of the water moving upward, or when the downward sedimentation time is less than the time it takes for the water to flow out of the sedimentation tank, the particles can separate from the water flow to achieve water purification. 2. Construction requirements: Use an excavator to level the site, ensuring there are no debris. Use a total station to measure and mark out the precise location of the sedimentation tank. Use an excavator to dig the sedimentation tank, with a digging depth of 2.4m, length of 9.5m, and width of 4.8m.
20
0
Share

What are the new regulations for elderly scooters on the road?

According to the non-motor vehicle registration station, elderly scooters in Beijing are currently not allowed on the road and cannot be licensed. Here is some information about filing non-personal motor vehicles on 12123: Notes: The vehicle to be filed must be a small car or a small new energy vehicle. Users can only file up to 3 non-personal motor vehicles at the same time, and the same motor vehicle can be filed by a maximum of 3 non-owner users at the same time. Filing methods: The first method is to scan the QR code of the vehicle to be filed, take relevant photos as prompted, fill in detailed information, and enter the SMS verification code of the owner of the vehicle to be filed. The second method only requires entering the SMS verification code of the owner of the vehicle to be filed, and the system will automatically approve it in the background.
9
2
Share

Is Shock Absorber Housing Repair a Major Accident?

Shock absorber housing repair is a major accident. Here is relevant information about 4S dealerships: Business scope of 4S dealerships: For a brand in a region, there are usually several 4S dealerships, primarily determined by the city's scale. Competition exists among these dealerships even though they represent the same brand. Currently in China, standard 4S dealerships only exist in cities at municipal level or above, while some county-level cities don't have automotive 4S dealerships. Characteristics of 4S dealerships: They are established according to manufacturers' unified standards with consistent models. Authorized by manufacturers, they can only sell single-brand vehicles. Within the manufacturer's permitted pricing range, they attract customers with the most competitive prices to reflect brand value and maintain brand reputation. However, it's important to understand correctly that 4S dealerships shouldn't be regarded as automobile manufacturers themselves.
10
1
Share

Reasons for Subaru Idle Vibration After Overhaul?

Subaru idle vibration after overhaul may be caused by carbon deposits on the throttle idle motor. It is necessary to clean the throttle carbon deposits, which can be done at a maintenance point. Idle refers to the operation of the engine without load, only overcoming the friction resistance of its internal components, without external power output. The minimum speed to maintain stable engine operation is called idle speed, which is one of the five basic operating conditions of the engine. When adjusting the idle speed, the speed should not suddenly increase or decrease, otherwise it will cause early wear of the engine. Idle speed can be adjusted by changing the throttle opening size and idle fuel supply. Generally speaking, the best idle speed is the minimum speed at which the engine does not vibrate within the idle range and has good acceleration performance. The phenomenon of idling is that the car is stationary while the engine is running "thumpingly," burning fuel in vain, which is indeed a waste. At this time, the mechanical work generated by gasoline combustion is consumed by the friction of internal parts.
10
3
Share

Is Deep Brake Maintenance Necessary?

Deep brake maintenance is necessary. Here are the relevant details: 1. Regular Inspection: The brake is one of the important systems of a car, operating in a very harsh environment. If this system fails, there is danger at any time, so the brake system should be inspected and maintained regularly. Some abnormal conditions may occur in the brake system, such as brake noise, deviation, insufficient braking force, soft brake pedal, abnormal brake wear, etc. 2. Regular Maintenance: Use solvent-based cleaners to clean the surface of the brake friction components and their heat dissipation channels. Note that cleaners containing lubricating ingredients should not be used to avoid soaking rubber. Use high-temperature resistant (above 600°C) and impact-resistant lubricants on the moving parts of the brake friction components to provide lubrication, auxiliary heat dissipation, and filling, avoiding uneven wear. Note that high-temperature resistant lubricants such as grease should not be used, as they can have the opposite effect once burned off.
13
5
Share

How much does a full car paint job with Parrot paint cost?

Parrot paint full car paint job costs around 2500. Here is some information about vehicle painting: Reasons: Rainwater generally contains acidity, and acid rain can cause significant damage to car paint, easily leading to oxidation of the paint surface and loss of gloss. Consequences: After rain, the air is relatively humid, which affects the drying speed of the painted surface. However, the moisture after rain reduces the amount of dust in the air, which is beneficial for painting. Precautions: If the car has just been painted, be careful not to let the newly painted areas come into contact with water or dust. It's best not to drive the car out on rainy days because the new paint is still delicate and may leave marks when exposed to rainwater, which can be unsightly and sometimes cannot be removed even by polishing. It's advisable to park the car in a garage at night.
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.