Where to Collect the Vehicle Annual Inspection Sticker?

1 Answers
OscarFitz
07/24/25 9:44pm
Vehicle annual inspection stickers are collected at the local vehicle management office. Related details are as follows: 1. Precautions for annual inspection: Before the inspection, ensure all traffic violations are settled and fines are paid. Bring the vehicle registration certificate, copy of the compulsory traffic insurance policy, and the owner's ID card for the inspection. 2. Definition of annual inspection: Vehicle annual inspection (or motor vehicle inspection) refers to the annual safety technical inspection conducted on vehicles that have obtained official license plates and registration certificates. The purpose is to examine the main technical conditions of the vehicle, encourage enhanced maintenance, and ensure the vehicle remains in good condition for safe driving.
Was this review help?
6
1
Share
More Forum Discussions

What does gear mismatch mean?

Gear mismatch refers to the mismatch between speed and the selected gear. Here are the detailed explanations: Gear introduction: First gear within 10 km/h, second gear between 10-20 km/h, third gear between 20-30 km/h, fourth gear between 30-40 km/h, and fifth gear can be used above 40-50 km/h. Effects of gear mismatch: Increased component wear: Prolonged mismatch can accelerate component wear and lead to premature damage to the engine and transmission; Insufficient engine power: It can easily cause the engine to stall due to insufficient power or make the engine struggle, resulting in vehicle vibration. Transmission gears: In the transmission gears, gears with smaller numbers are called low gears. The smaller the number, the greater the gear ratio and traction, and the lower the speed. Gears with larger numbers are called high gears. The larger the number, the smaller the gear ratio and traction, and the higher the speed.
15
4
Share

Does a higher gear mean faster speed?

Higher gear means faster speed, here are the details: High gear: The higher the gear, the faster the speed, but it does not mean greater horsepower. First gear has the most horsepower. For steeper slopes, first gear is chosen instead of fifth gear. When overtaking, greater horsepower is essential to quickly accelerate with a press of the throttle. If you try to overtake in fifth gear, the speed increases very slowly, which makes overtaking risky. Low gear: The lower the gear, the greater the horsepower, and the higher the engine speed. When the throttle is fully pressed in fifth gear, you may find that the speed does not increase. If you downshift to a lower gear like third or second for climbing, pressing the throttle will result in a very rapid surge of power. This is the principle of downshifting to overtake.
16
4
Share

What car has an inverted H logo?

The inverted H logo belongs to Honda. Here are the specific details: Introduction: Honda refers to Honda Motor Co., Ltd., which is the world's largest motorcycle manufacturer, and its automobile production and scale also rank very high globally. History: The company was founded in September 1948 by Soichiro Honda, with its headquarters in Tokyo and over 180,000 employees. Today, Honda has become a multinational automobile and motorcycle production and sales group. The name 'Honda' originates from the Honda Motorcycle Company established by Mr. Soichiro Honda in 1948. 'Honda' is the surname of Mr. Soichiro Honda. The 'H' in the logo is the first letter of 'Honda' in pinyin.
2
3
Share

Will points be deducted for changing lanes by crossing the diversion line?

Points will be deducted for changing lanes by crossing the diversion line. Below are the specific details: Introduction to diversion lines: Diversion lines are prohibited markings used to indicate that vehicles must follow the prescribed route and are not allowed to cross or drive over the lines. If a vehicle crosses or drives over the diversion line, the police may impose penalties such as "a warning and 3 points deducted" or "a fine and 3 points deducted" on the driver. Purpose of diversion lines: The purpose of diversion lines is to ensure that every vehicle can "stay in its lane," serving to regulate, guide, and warn traffic, thereby reducing traffic accidents. Use of diversion lines: Diversion lines are mainly used at intersections that are too wide, irregular, or have complex driving conditions, at ramp entrances of interchanges, or at other special locations.
5
4
Share

Should You Press the Clutch or the Accelerator When Reversing?

Press the clutch when reversing. Here are the details: Reversing on flat ground: The car does not require much power to reverse. Simply pressing the clutch to engage the semi-engagement point and using the brake is sufficient for control. Reversing on a slope: When the clutch alone cannot provide enough power, lightly pressing the accelerator can supplement the required power. Here is additional information: Clutch: The clutch is located inside the flywheel housing between the engine and the transmission. The clutch assembly is secured to the rear plane of the flywheel with screws, and the output shaft of the clutch serves as the input shaft of the transmission. Function of the clutch: The clutch is a common component in mechanical transmissions, allowing the drivetrain to be engaged or disengaged as needed.
15
0
Share

What to Press When Reversing?

Press the clutch when reversing. Here are the specific details: Reversing Process: When reversing, first press the clutch pedal to disengage the clutch, which cuts off the power connection between the engine and the transmission. Then, shift into reverse gear and slowly release the clutch pedal until the car starts moving gradually. Reversing Technique: You can also use the semi-engaged state (half-clutch) when reversing. Just slowly lift the clutch pedal until the vehicle overcomes the resistance and starts moving, then hold the pedal at that position. Reversing Precautions: Always check the rear surroundings before reversing. Do not rely too much on electronic reversing aids, and ensure it is safe before proceeding.
1
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.