Where to Collect the Inspection Compliance Label?

2 Answers
DeHarper
09/05/25 2:26am
Inspection compliance labels can be obtained at the Vehicle Management Office or the Traffic Police Brigade. The procedure for collecting the inspection compliance label is as follows: 1. For vehicles exempt from inspection within 6 years, under the condition of no major accidents, they are exempt from on-site inspection, but every two years, the annual inspection sticker and green environmental protection sticker must be collected from the Vehicle Management Office. At the time of inspection, bring your ID card, vehicle registration certificate, and the current valid compulsory traffic insurance policy to the Vehicle Management Office for processing; 2. Upon arrival at the Vehicle Management Office, submit your documents to the staff at the designated window. After the information is entered, you can proceed to the next window to directly collect the annual inspection sticker and environmental protection sticker; 3. The annual inspection sticker and green environmental protection sticker for exempt vehicles are free of charge and issued at no cost, but a copy of the vehicle registration certificate is required for each sticker when collecting them, which can be prepared in advance; 4. Arrange your time reasonably. The exempt inspection stickers can be applied for up to 60 days in advance. Late collection will result in fines and demerit points; 5. Before collecting, check if there are any traffic violations associated with the vehicle. If there are, they must be resolved first; otherwise, the process will not be completed.
Was this review help?
4
0
Share
ReaganLynn
09/17/25 3:08am
I just had my vehicle inspected recently, so I know all about getting the inspection sticker! Nowadays, it's mostly electronic inspection stickers that can be checked directly through the 12123 app. However, some regions still require paper stickers, which you can get right at the inspection station service window after the inspection. If it's a new car registration inspection sticker, the sales consultant at the 4S dealership will stick it directly on your windshield. Remember to bring the original vehicle registration certificate and the owner's ID card. After paying the fee, the staff will print it out for you in just two minutes. Inspection stations are highly efficient—last time I got my car inspected, before I could even sit down, they handed me a brand-new inspection sticker. Never try to forge a sticker yourself. Nowadays, traffic police can tell if it's fake just by scanning your license plate, and if caught, you'll face fines and points without question.
Was this review help?
3
2
Share
Expand All
More Forum Discussions

How to Lock the Doors of a Crown Car?

Crown car door locking methods are: 1. Press the lock button on the car remote key to lock the doors; 2. Use the mechanical key to lock the doors. The Crown has body dimensions of: length 5020mm, width 1805mm, height 1480mm, a wheelbase of 2925mm, and a fuel tank capacity of 70 liters. The Crown is equipped with a 2.0T turbocharged engine, delivering a maximum power of 173 kW and a maximum torque of 350 Nm, paired with an 8-speed automatic transmission. It features a front suspension type of double-wishbone independent suspension and a rear suspension type of multi-link independent suspension.
12
5
Share

Why Does the Car Shake Violently During Emergency Braking?

The reasons for severe shaking during emergency braking are as follows: During high-speed braking, when the brake disc is constrained by the brake caliper, an uneven brake disc surface can cause vibrations. These vibrations are transmitted to the vehicle body and steering wheel through the tie rods and suspension, resulting in body shaking and unstable steering. The harmful effects of emergency braking on the car are as follows: 1. Emergency braking damages the brake pads and significantly impacts the braking system. It also accelerates tire wear, reducing the tire's lifespan. 2. Emergency braking suddenly increases the vehicle's load, placing additional strain on the engine and transmission, which can harm these systems. 3. It reduces the lifespan of the clutch system. 4. It increases fuel consumption.
12
3
Share

How to adjust the time on Q7?

q7 time adjustment method is: 1. Set through the MMI system, select the SETUP system button; 2. Select the time setting, rotate the knob left or right to adjust the date and time, and press the knob to confirm. The Q7 body dimensions are: length 5067mm, width 1970mm, height 1731mm, wheelbase 2996mm, fuel tank capacity 85 liters. The Q7 is equipped with a 2.0T turbocharged engine with a maximum power of 180kW and a maximum torque of 370Nm, matched with an 8-speed automatic transmission. The drivetrain is front-engine four-wheel drive, and both front and rear suspensions use multi-link independent suspension.
14
3
Share

What brand is the Lynk & Co 05?

Lynk & Co 05 is a premium luxury brand vehicle jointly established by Geely and Volvo. Taking the 2020 Lynk & Co 05 as an example, its body dimensions are: length 4592mm, width 1879mm, height 1628mm, wheelbase 2734mm, minimum ground clearance 213mm, and curb weight 1738kg. The 2020 Lynk & Co 05 is equipped with a 2.0L turbocharged engine, with a maximum horsepower of 254 and a maximum torque of 350 Nm. It is paired with an 8-speed automatic transmission. The front suspension type is MacPherson independent suspension, and the rear suspension type is multi-link independent suspension.
8
3
Share

What is the fuel tank capacity of the MG 5?

The 2021 MG 5 comes in 11 models, all with a fuel tank capacity of 45 liters. The vehicle is equipped with either a 1.5-liter turbocharged engine or a 1.5-liter naturally aspirated engine. The transmission options include a 5-speed manual transmission, an 8-speed continuously variable transmission (CVT), and a 7-speed wet dual-clutch transmission. The vehicle adopts a front-engine, front-wheel-drive layout. In the same class, the 2021 Ford Escort has a fuel tank capacity of 50 liters, while the 2022 Chevrolet Cavalier has a 36-liter tank. During actual refueling, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity specified by the manufacturer is measured from the bottom of the tank to the safe fill level. There is additional space from the safe fill level to the tank opening, which is designed to accommodate fuel expansion due to temperature increases, preventing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the calibrated tank capacity. To check the remaining fuel level, drivers can observe the fuel gauge on the right side of the instrument panel, marked with 'E' and 'F'. When the needle is close to 'E', it indicates low fuel, while nearing 'F' means the tank is nearly full.
7
0
Share

How to Remove the High-Mount Stop Lamp on a Cruze?

1. First, empty the trunk and lift the mat above the spare tire; remove the self-tapping rivets on the left, right, and center. 2. Remove the plastic panel below the trunk lid and the felt panels on both sides, then unscrew the lamp holder's fixing screws. Loosen the clips and pull out the lamp holder. 3. Additional Information: The high-mount stop lamp is generally installed on the upper part of the rear of the vehicle to make it easier for vehicles behind to notice when the front vehicle is braking, thereby helping to prevent rear-end collisions. It is also known as the third brake light, high-mounted brake light, or third stop lamp.
11
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.