···
Log in / Register

Where to Check Tire Pressure on the Oshan X5 Dashboard?

4 Answers
IsabelleMarie
09/06/25 5:33am

Press the SET button to display tire pressure data on the dashboard. Oshan X5: The Oshan X5 features a coupe-like design, measuring 4.5 meters in length and 1.9 meters in width, with a height of 1.58 meters. Its wide and low stance exudes a sporty and fashionable appeal. It boasts an oversized front grille with a cascading 3D waterfall design, complemented by chrome accents, giving the vehicle a dynamic and unique appearance that stands out, reminiscent of a sports car. Oshan X5 Engine: The X5 is equipped with the newly developed Blue Whale 1.5T engine, a modular technology platform pioneered in China. It incorporates advanced features such as an electromagnetic-controlled twin-turbo system, dual-outlet integrated exhaust manifold, intelligent variable valve control system, water-cooled starter, full-time variable displacement oil pump, and multiple noise-reduction technologies. These enable the X5 to deliver instant power with a maximum output of 132 kW and 300 Nm of torque, while achieving a combined fuel consumption of just 6.2L per 100 km. It offers a smooth, fuel-efficient, and worry-free driving experience, along with enhanced quietness and comfort.

Was this review help?
8
4
Share
Reed
09/18/25 5:24am

I recently purchased an Oshan X5 and have been pondering this issue as well. Typically, the tire pressure is displayed on the dashboard screen in front of the driver, visible after starting the vehicle. However, to locate the specific position, you need to start the engine with the car key, then look for the buttons on the left or right side of the steering wheel—usually labeled with arrows or 'Menu.' Press them gently a few times, and the small display in the center of the dashboard will cycle through the options. The tire pressure information is generally tucked away in the vehicle data menu. After selecting it, the pressure values for each tire will appear. If you can't see it, it might be because the tire pressure monitoring system hasn't been initialized or there's a fault. You can try turning off and restarting the vehicle or checking the user manual. As a new car owner, I believe regularly checking tire pressure is crucial—it helps prevent blowouts and saves fuel, especially during long trips when extra attention is needed.

Was this review help?
5
3
Share
Expand All
RobertMarie
11/01/25 5:49am

Driving experience tells me that checking tire pressure on the Oshan X5 dashboard is quite straightforward. After starting the engine, focus your eyes on the combination meter in front of the steering wheel, where there's a digital display. You need to operate the control buttons on the steering wheel, such as the left and right page-turning buttons, to switch to the vehicle information section. The tire pressure data is usually clearly listed in this category. Remember, some cars may not display it on the main screen by default, requiring manual switching. The tire pressure values are real-time, and if they fall below 2.5Bar or show a red warning, it's time to inflate. Taking half a minute to check before driving can prevent accidents and extend tire life, which is much better than dealing with repairs after problems arise.

Was this review help?
2
5
Share
Expand All
CarmenLynn
12/15/25 5:57am

Buddy, the tire pressure for the Oshan X5 is displayed on that small square screen on the dashboard. After starting the car, use the left and right buttons on the steering wheel to navigate through the menu options. Find the 'Vehicle Status' or a similar label, click into it, and the tire pressure numbers will pop up. Keep an eye on it to make sure it's not too high or too low, to save fuel and prevent rapid tire wear. If you can't find it, the system might be frozen—try restarting it or checking the manual.

Was this review help?
2
2
Share
Expand All
More Forum Discussions

What is the horsepower of the Geely Boyue?

Geely Boyue has a maximum horsepower of 163ps. Taking the 2021 Geely Boyue as an example, it is a 5-door, 5-seater compact SUV with body dimensions of: length 4519mm, width 1831mm, height 1694mm, wheelbase 2670mm, fuel tank capacity 58l, and curb weight 1575kg. The 2021 Geely Boyue is equipped with a 1.8t turbocharged engine, with a maximum power of 120kw, maximum power speed of 5500rpm, maximum torque speed ranging from 1500rpm to 4500rpm, and is paired with a 6-speed manual transmission.
3
3
Share

How is a car battery charged?

Car battery charging method is: 1. Open the front cover of the car and take out the battery charger; 2. Connect the positive terminal of the battery to the positive terminal of the power source, and the negative terminal of the battery to the negative terminal of the power source. Methods to check for insufficient car battery power are: 1. The car horn sound becomes weaker; 2. The car struggles to start, indicating battery discharge; 3. The battery fault light turns on. Precautions for car battery charging are: 1. Battery voltage below 10% of the rated voltage will cause battery discharge; 2. Avoid water entering the battery during charging; 3. Connect directly to the battery for charging, avoid removing the battery to prevent data loss.
16
0
Share

What Causes the Rattling Noise When the Atenza Goes Over Bumps?

Atenza's rattling noise when going over bumps is caused by loose component screws. It is necessary to visit a 4S shop to check the loose parts and tighten the screws. Below is a related introduction to the Atenza: 1. Body Dimensions: The Atenza has a body length, width, and height of 4870mm, 1840mm, and 1445mm respectively, with a wheelbase of 2830mm. 2. Powertrain: This car uses two engines, one is a 2.0-liter naturally aspirated engine, and the other is a 2.5-liter naturally aspirated engine; paired with a 6AT transmission. (1) 2.0-liter naturally aspirated engine: The engine has a maximum power of 158 horsepower and a maximum torque of 202 Nm. The engine's maximum power speed is 6400 rpm, and the maximum torque speed is 4000 rpm. This engine is equipped with a variable valve timing control system and direct fuel injection technology, and uses an aluminum alloy cylinder head and block. (2) 2.5-liter naturally aspirated engine: The engine has a maximum power of 192 horsepower and a maximum torque of 252 Nm. The engine's maximum power speed is 6100 rpm, and the maximum torque speed is 3250 rpm. This engine is equipped with a variable valve timing control system and direct fuel injection technology, and uses an aluminum alloy cylinder head and block.
8
0
Share

When should the original timing belt be replaced?

The original timing belt should be replaced when the vehicle reaches 80,000 kilometers. The functions of the timing belt are: 1. To drive the engine's valve train, ensuring the intake and exhaust valves open and close at the correct times; 2. To guarantee the engine cylinders can properly intake and exhaust air. The replacement procedure for the timing belt is: 1. Remove the valve cover and the timing belt housing; 2. Rotate the crankshaft to position the first cylinder at top dead center, then secure the crankshaft with the fixing bolt; 3. Rotate the intake and exhaust camshafts—there are grooves at the rear of the camshafts—align the grooves of both camshafts horizontally; 4. Remove the old belt and install the new one; 5. Ensure there is no gap at the crankshaft position sensor during installation to avoid triggering fault codes.
20
1
Share

How to Install a Belt?

The method for installing a belt is as follows: 1. Align the ignition marks of the crankshaft and camshaft; 2. Place the belt on the crankshaft pulley and smoothly guide it upwards from the side opposite the tensioner pulley to place it on the camshaft pulley; 3. Then fold the belt into the side of the tensioner pulley and tighten the tensioner. The belt is an important component of the engine's valve timing system, ensuring accurate intake and exhaust timing by connecting to the crankshaft and matching a specific transmission ratio. Steps for replacing the belt: 1. Lift the car with a jack; 2. Remove the engine undercover; 3. After removing the undercover, the generator belt will be visible; 4. Remove the exposed old generator belt; 5. Install the new engine belt. Situations requiring belt replacement: 1. Abnormal belt wear; 2. Belt folding failure; 3. Belt impact load.
14
0
Share

How to Disassemble the Wuling Hongguang Key?

The method to disassemble the Wuling Hongguang key is: 1. Use a flathead screwdriver to pry open the side opening of the key; 2. Open the key casing along the pried gap. Taking the 2019 Wuling Hongguang S3 as an example, it belongs to the mid-size SUV category, with body dimensions of: length 4655mm, width 1735mm, height 1790mm, a wheelbase of 2800mm, a fuel tank capacity of 49 liters, and a curb weight of 1380kg. The 2019 Wuling Hongguang S3 is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 99PS, a maximum power of 73kW, a maximum torque of 140Nm, and is paired with a 6-speed manual transmission.
11
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.