Where to Check the Tire Pressure Monitoring in the Tayron?

Why is the steering wheel not straight after wheel alignment?

After a wheel alignment, if the steering wheel becomes crooked, it may be due to inaccurate wheel alignment data. Therefore, it is recommended not to perform wheel alignment unnecessarily when there are no issues with the car. Wheel alignment is a maintenance procedure that should only be performed when problems arise. Performing it unnecessarily can lead to inaccurate wheel alignment data. Here are some related details: 1. Hazards of inaccurate wheel alignment data: (1) If the wheel alignment data is inaccurate, it can pose a threat to the tires, the vehicle, and even driving safety. The most common issue is affecting the stability of the car's straight-line driving, causing it to drift either to the left or right, requiring the driver to constantly adjust the steering wheel. (2) It can also lead to instability when the car is turning, as problems with wheel alignment affect the tire contact position and direction, disrupting balance during turns. (3) Issues with wheel alignment can also impact the car's acceleration, braking, and suspension load, causing uneven tire wear and potential tire blowouts, which can compromise driving safety. 2. Situations that require wheel alignment: (1) Damage to the chassis and suspension caused by an accident. (2) Abnormal tire wear. (3) Unusual car performance, especially drifting. (4) Removal of axle or suspension components.

15

0

Share

Is changing the color of rearview mirrors illegal?

It is not illegal. According to regulations, modifying the vehicle's color within 30% of the body is allowed. Both decals and paint are permissible, as long as they do not exceed 30% of the vehicle's surface and avoid colors used by police, hospital, military, or engineering vehicles. Additional information: 1. Introduction to rearview mirrors: Rearview mirrors are tools that allow drivers to directly obtain information about the rear, sides, and lower parts of the vehicle while seated in the driver's seat. For the convenience of drivers and to prevent traffic accidents and ensure personal safety, all countries mandate the installation of rearview mirrors on vehicles, and all mirrors must be adjustable. 2. Interior rearview mirror: The interior rearview mirror allows drivers to check the rear situation without significantly changing their forward view while driving. 3. Exterior rearview mirrors: Passenger vehicles typically mount exterior rearview mirrors on the doors. In Japan, some passenger vehicles also mount them on the fenders. 4. Undercarriage mirrors: Undercarriage mirrors enable drivers to see areas beyond the front and rear wheels beneath the vehicle body through the mirror directly in front of the driver's seat. This helps drivers spot people or obstacles near the wheels or the vehicle's sides when reversing or starting forward, preventing injuries, damage to objects, or vehicle harm, thus providing convenience and safety to the driver.

14

2

Share

What Are the Tips for Selecting License Plates During Used Car Transfer?

There are no tricks. The process of selecting license plates for used car transfers is the same as for new car registrations—90% luck and 10% fate. Many people hope to pick a good number when selecting license plates, such as consecutive numbers or triple-digit repeats, but this is nearly impossible. Over a decade ago, it was still possible to randomly get a perfect license plate number. More details are as follows: DMV 50-to-1 Selection: Most car owners selecting plates for new cars basically use the DMV's 50-to-1 random selection system. They have 90 seconds to choose a number and submit it. This method relies purely on luck—you might get a decent number, but it could also be unsatisfactory. Custom Selection: Custom selection allows you to filter based on your preferences. You can input your favorite digits, and the system will generate plates containing those numbers. However, don’t expect numbers like "666," "888," or "123"—they’ve long been taken. Online Selection: Online selection is relatively simpler and offers a higher chance of getting a good number. Simply download the "Traffic Management 12123" app, click "Pre-select License Plate," then choose "New Car Selection" for new vehicles or "Used Car Selection" for used cars.

19

1

Share

Do I Need to Replace the Ignition Coil When Changing Spark Plugs?

If the original ignition coil is not damaged and has no electrical leakage, replacement is unnecessary. Remove the ignition coil and observe the end connected to the spark plug. If it appears whitish or dark yellow, it indicates high-voltage electricity has penetrated the ignition coil. If the whitish discoloration is severe, replacement is required. Procedure for changing spark plugs: Open the engine hood, lift the plastic cover of the engine, and remove the high-voltage distributor wires. Mark each cylinder's position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. During removal, check for external debris like leaves or dust and ensure thorough cleaning. Place the new spark plug into the spark plug hole, hand-tighten it a few turns, then use the socket to tighten it further. Reinstall the removed high-voltage distributor wires in the ignition order and secure the cover. Spark plug replacement interval: Under normal maintenance conditions, replace spark plugs every 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine type, so it's advisable to follow the user manual. Refer to the following standards for maintenance replacement: platinum spark plugs at 40,000 km, standard nickel alloy spark plugs at 20,000 km, and iridium spark plugs at 60,000-80,000 km.

13

1

Share

What is the reason for the outer edge of the brake disc not being worn?

The reason why the outer edge of the brake disc is not being worn is introduced: The brake pads are uneven, and the brake pads should be replaced in time. Car brake pads, also known as car brake linings, refer to the abrasive materials fixed on the brake drum or brake disc that rotates with the wheel. The friction linings and friction blocks bear external pressure and generate friction to achieve the purpose of vehicle deceleration. The following is the relevant introduction about brake pads: 1. Brake pad maintenance: The braking effect of the car is determined by the brake pads, which are very important for the vehicle. Daily inspection and protection are indispensable. Under normal driving conditions, the brake shoes should be checked every 5,000 kilometers. Not only the remaining thickness should be checked, but also the wear state of the shoes, whether the wear on both sides is the same, whether the return is free, etc. Any abnormal situation must be dealt with immediately. When the thickness of the brake pads is about 0.5 cm, they should be replaced. 2. Brake pad replacement: It is best to replace the brake pads with the original spare parts provided by the manufacturer. Only in this way can the braking effect between the brake pads and the brake disc be the best, and the wear is the smallest. After replacement, be sure to step on the brakes several times to eliminate the gap between the shoes and the brake disc, otherwise, the first step may not brake, which can easily cause an accident.

10

3

Share

What is the process for reporting a car accident to insurance?

Here is the insurance process after a car accident occurs: 1. Notify the insurance company: After an insurance incident occurs, the policyholder should promptly notify the insurance company of the incident's time, location, cause, extent of losses, policy number, insured subject matter, insurance type and category, and policy duration. If the insured subject matter is damaged in a different location, the policyholder should report the incident to the original insurance company and its local branch or agent in the accident area. Before the insurance company arrives at the accident scene, the policyholder should take necessary rescue measures and organize the damaged insured subject matter. For fires or motor vehicle accidents, the policyholder should follow the on-site instructions of the fire department or traffic police at the scene. 2. Undergo insurance company inspection: The policyholder should allow the insurance company or its authorized personnel (such as insurance agents or inspection agencies) to inspect the damaged insured subject matter at the accident scene and provide all necessary assistance to ensure the insurance company accurately determines the cause of the accident and confirms the extent of damage and loss amount. 3. Submit a claim application and provide claim documents: The policyholder should submit a claim application to the insurance company in accordance with relevant laws and the insurance contract, along with the required claim documents. The policyholder should promptly report the incident to the local public security department and submit an "accident notification" to the insurance company within 24 hours of the accident.

12

0

Share

Where to Check the Tire Pressure Monitoring in the Tayron?

Why is the steering wheel not straight after wheel alignment?

Is changing the color of rearview mirrors illegal?

What Are the Tips for Selecting License Plates During Used Car Transfer?

Do I Need to Replace the Ignition Coil When Changing Spark Plugs?

What is the reason for the outer edge of the brake disc not being worn?

What is the process for reporting a car accident to insurance?

Can an Accident-Damaged Car Still Be Driven?

How Often Should the Transmission Fluid Be Changed for the Honda Avancier?

Is Toothpaste Harmful to Car Paint?

What to Do When the Engine Noise Increases?