···
Log in / Register

Where to Check the Study Hours for Subject 4?

1 Answers
LaEmery
07/29/2025, 07:58 PM

Students can find the learning website on their study hour card, where they can check the study hours for Subject 4. Below is some information about the study hours for Subject 4: 1. Study Hours: For ordinary C1, C2, and C5 driver's licenses, the study hours for Subject 4 are 10 hours; for A1, A2, and B1 licenses, it's 16 hours; and for A3 and B2 licenses, it's 20 hours. Each study hour is 60 minutes, with effective teaching time not less than 45 minutes. 2. Subject 4 Scheduling: Generally, Subject 4 can be scheduled three days after passing the Subject 3 test. In some places, students can even take Subject 4 directly on the same day they pass Subject 3 without prior scheduling and receive their license immediately. However, specific arrangements may vary depending on the local vehicle management office.

Was this review help?
15
2
Share
More Forum Discussions

What does the P0685 fault code mean when the car won't start?

P0685 indicates an Engine Control Module (ECM) malfunction, which could be caused by engine issues or related circuit problems. The Engine Control Module (ECM) continuously monitors and controls the normal operation of the engine. Here's relevant information: ECM: The Automotive Engine Control Module (ECM) is one of the most crucial automotive electronics. Early ECMs required three printed circuit boards, composed of 12 LSIs and dozens of SSIs. Today's ECMs use microcontroller-based VLSI technology and require only one printed circuit board. Composition: The core component of ECM is a microprocessor-based VLSI microcontroller, which collects control parameters from various sensors (temperature, pressure, gas-sensitive, displacement) to implement automatic control over engine operation, fuel injection, ignition, combustion, operation, and emissions. The ECM also connects to the vehicle's main computer via a bus system.
12
3
Share

Is the Tiida equipped with a three-cylinder or four-cylinder engine?

The new Tiida is not equipped with a three-cylinder engine. Instead, the new Tiida model features a 1.6-liter four-cylinder naturally aspirated engine, continuing to use the car's previous powertrain. Additional Information: Advantages of Three-Cylinder: Compared to the 1.5L three-cylinder engine in the Focus, the Tiida's 1.6L four-cylinder engine not only has a slightly larger displacement and superior power parameters but also offers certain advantages in the smoothness and continuity of power output. Comparison of Pros and Cons: Due to the inherent structural limitations of three-cylinder engines, they may exhibit discontinuous power output and lack stability during peak output. In contrast, four-cylinder engines perform quite well in these aspects, delivering not only smooth output but also stable performance within peak ranges.
7
3
Share

How Long Should a New Car Be Ventilated to Remove Formaldehyde?

New cars require several months of ventilation to remove formaldehyde. Here are some techniques for formaldehyde removal: 1. Ventilation and Sun Exposure: Advantages include being free, eco-friendly, and simple. Disadvantages include faster aging of the car, quicker color fading, and risk of theft. 2. Photocatalytic Spray Method: The advantage is that it can be sprayed directly in the car, providing quick symptomatic relief and being easy to operate. The disadvantage is that it treats the symptoms rather than the root cause. 3. Activated Charcoal: The advantage is ease of operation, while the disadvantage is limited effectiveness. 4. Zeolite: Advantages include strong adsorption capacity, powerful degradation ability, no secondary pollution, and being refined from natural stone with antibacterial properties. The disadvantage is that the quantity needed depends on the space size. 5. Fruit Peels: The advantage is the pleasant fruit aroma in the car, but the disadvantage is that they cannot absorb harmful gases like formaldehyde.
1
3
Share

What does it mean to engage the parking brake?

Engaging the parking brake is to prevent the car from lurching forward when starting due to being in gear. Additionally, some vehicle models have the parking brake switch connected in series with the starting system, meaning that the starting system will only receive power when the parking brake is engaged, allowing the vehicle to start normally. Below are specific details about the parking brake: 1. Introduction: The parking brake, commonly referred to as the handbrake, is a manual brake installed in motor vehicles. It is used to stabilize the vehicle after it has come to a stop, preventing accidents caused by the vehicle rolling on inclined surfaces. 2. Location: The common handbrake is usually positioned within easy reach of the driver's right hand for convenience. Some automatic transmission models on the market feature a foot brake located outside the driver's left foot, which serves the same function as the handbrake. A few advanced models are also equipped with an electronic parking brake system.
16
4
Share

Is it normal for the BYD F3 electric fan not to work?

It is not normal for the BYD F3 electric fan not to work, and it needs timely repair. Here is a detailed introduction about the BYD F3: 1. Overview: The BYD F3 is an A+ class passenger car produced by BYD Auto, officially launched on April 16, 2005. The design concept of the F3 draws on the successful experience and model of Japanese and Korean car development. The 'MM' design concept (which means maximizing the space for passengers while minimizing the space occupied by necessary machinery) runs through the entire design of the F3. 2. Others: The wheelbase is 2600mm. The vehicle dimensions are 4.533 meters, 1.705 meters, and 1.490 meters. The trunk capacity is 480 liters. The fuel consumption is 5.9L/100km. The fuel tank capacity is 50 liters. The engine type is BYD473QE, a VVL variable valve lift engine. The top speed is 170km/h. The acceleration time is 11.3 seconds. The drive type is front-wheel drive.
2
1
Share

What are the precautions to reduce the number of scratches on a new car?

Precautions to reduce the number of scratches on a new car are as follows: 1. Keep to your lane: Since new drivers tend to drive relatively slowly, they should stay in the slow lane and avoid occupying the fast lane for extended periods. Always maintain proper lane discipline. 2. Display a novice driver sign: It is recommended for new drivers to display a "Novice Driver" sticker on their car to alert other drivers on the road to keep a safe distance. 3. Stay left on narrow roads: On narrow roads, if conditions permit, try to stay as far left as possible. Since the driver sits on the left side of the vehicle, they can judge the distance on the left more accurately. Make sure to leave ample space on the right to avoid hazards. 4. Control speed carefully: When approaching pedestrian crossings or making turns, always control the vehicle's speed, slow down, and proceed with caution. Especially when turning, yield to non-motorized vehicles, vehicles going straight, and pedestrians.
7
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.