Where to Check the Results of Subject One Exam?

1 Answers
VonAllie
07/30/25 9:44am
The score of the Subject One exam is available immediately. After completing the questions and clicking submit, the system calculates the candidate's score, and the result is known right away. However, if you want to check your score online, you will need to wait for the data to sync to the system before you can view it. To check the Subject One exam score, you can visit the 'Comprehensive Traffic Safety Service Management Platform,' provided the data has been synchronized. Generally, after passing the exam, it takes about 2-3 days for the score to be uploaded to the system. In some cases, synchronization can be completed within 1-2 hours, and the candidate will receive an SMS notification. The total duration of the Subject One exam is 45 minutes, and the test consists of 100 questions, including true/false and multiple-choice questions. The maximum score is 100, with a passing mark of 90. The exam questions are randomly selected and combined by the computer-based driver's license examination system according to the proportion specified in the 'Motor Vehicle Driver's License Work Regulations.'
Was this review help?
16
0
Share
More Forum Discussions

What is the load capacity of the BMW 3 Series?

The BMW 3 Series has a load capacity of 410KG. Regulations regarding load capacity: A 4-axle truck with a total weight of 40 tons was not previously considered as overloading, but now a 4-axle truck exceeding 36 tons is considered over the limit. The new "Regulations on the Management of Over-Limit Transport Vehicles on Highways" will be implemented, with significant changes to the overloading standards. Different load classifications: For a 4.2-meter vehicle, the load capacity is within 5 tons; for a 6.2-meter vehicle, within 8 tons; for a 7.2-meter vehicle, within 10 tons. For vehicles over 9.6 meters, the load capacity can be determined based on the number of axles: single axle (2 bridges) within 15 tons, double axle (3 bridges) within 20 tons, and double axle (4 bridges) within 25 tons.
2
3
Share

What is the air flow rate of the Nissan 1.6 engine?

Nissan 1.6 engine air flow rate shows 1.3-1.64 after the engine warms up, with battery voltage ranging from 0-15. Introduction to air flow: The air flow sensor measures the amount of air inhaled by the engine and inputs the signal to the electronic control unit as the main control signal for fuel injection and ignition control. Function of the air flow meter: The function of the automobile air flow meter is to monitor the amount of air intake by the engine and convert the air intake information into an electrical signal transmitted to the electronic control unit. The electronic control unit uses this signal to determine the fuel injection amount of the engine. The automobile air flow meter affects the engine's power performance. The reason for the damage to the automobile air flow meter is the long-term failure to replace the air filter or the use of inferior air filters, which causes the hot wire of the air flow meter to accumulate dust for too long, resulting in inaccurate or failed resistance value changes. Dust can also cause the throttle to become dirty.
4
0
Share

Honda CRV Throttle Body Matching Method?

Honda CRV throttle body matching method: 1. Ensure the accelerator pedal is fully released. 2. Turn the ignition switch to the ON position. 3. Turn the ignition switch to the OFF position and wait for at least 10 seconds. At this point, confirm the throttle body operation for more than 10 seconds by listening to its movement sound. 3. Start the engine and warm it up to normal operating temperature. 4. Check and confirm that the coolant temperature and other conditions are normal. 5. Turn the ignition switch OFF and wait for at least 10 seconds. 6. Ensure the accelerator pedal is fully released, turn the ignition switch to the ON position, and wait for 3 seconds. 7. Within 5 seconds, quickly repeat the following operation 5 times. a. Fully depress the accelerator pedal. b. Fully release the accelerator pedal. 8. Wait for 7 seconds, fully depress the accelerator pedal, and maintain this state for about 20 seconds until the MIL stops blinking and starts to stay lit. 9. Within 3 seconds after the MIL light turns on, fully release the accelerator pedal. 10. Start the engine and let it idle for a while to complete the matching.
10
5
Share

What is the pressure rating of the radiator cap for the Qingling 2.8t diesel engine?

Qingling 2.8t diesel engine radiator cap pressure is 0.9. Pressure 0.9: A radiator cap rated at 0.9 can withstand a pressure of 0.9 bar. The numbers on the radiator cap, such as 0.9, 1.0, 1.1, etc., indicate the internal pressure value of the cooling system after the engine has warmed up. When the cooling system pressure rises to this value, the pressure valve on the radiator cap will release pressure, allowing some high-temperature vapor to pass through the side pipe of the radiator filler neck into the bottom of the coolant in the expansion tank. If a high-rated radiator cap is replaced with a low-rated one, the engine coolant will enter the expansion tank in large quantities due to the lower pressure rating of the cap, resulting in reduced coolant levels during engine operation and causing high water temperature. Conversely, if a low-rated radiator cap is replaced with a high-rated one, the engine may experience increased internal cooling system pressure during operation due to the higher pressure rating of the cap. This elevated pressure can easily lead to leaks (such as radiator leaks, hose connection leaks, cylinder head gasket leaks, etc.).
4
5
Share

How to Exit the Highway Without Taking a Card?

When exiting the highway, pay the full toll from the entry point to the exit point, and you can leave the highway. Below are specific instructions for entering the highway: Card Collection Process: The card dispenser or manual toll booth will be on the left side of the vehicle. Drive close to the left in advance and visually estimate the distance between the left corner of your vehicle and the card dispenser or toll booth. After adjusting the left and right distance, keep the steering wheel straight and proceed slowly without swaying left or right. When the card dispenser or toll exit is directly aligned with your left shoulder, stop the vehicle, shift to neutral, or engage the handbrake. Press the corresponding button based on your vehicle type and then take the card. Below is additional information: Toll Standards: Depending on the type of vehicle, highways implement a classified toll standard, which is indicated by the numbers 1 and 2 on the card dispenser. 1 represents sedans and small passenger vehicles with 7 seats or fewer, as well as small trucks weighing 2 tons or less. 2 represents passenger vehicles with 8 to 19 seats and trucks weighing more than 2 tons up to 5 tons (inclusive).
13
1
Share

Where is the hood switch of the Haval F7 located

Haval f7 hood switch is located at the latch under the dashboard on the driver's side, the hood will pop open a certain gap. Reach into the gap, pull the latch in the direction of the arrow and lift the hood, the hood will automatically rise to the open position. The method to close the hood of the Haval F7 is to pull the hood down, and at a height of 20~30 cm from the latch, use appropriate force to quickly press down the hood to close it. Before driving, make sure the hood is closed and securely locked. Otherwise, it may open unexpectedly during driving, causing an accident. The Haval F7 is the second model of Haval's F series. It was launched on the evening of November 6, 2018, at the Shanghai Carbon Studio in the form of a masked singer program. The Haval F7 is the flagship model of the Haval F series, an AI intelligent connected SUV. The new car is available in two versions, 1.5GDIT and 2.0GDIT, with a total of 6 models, priced between 109,000 yuan and 149,000 yuan.
15
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.