···
Log in / Register

Where to Check the Production Date of Car Windshields?

6Answers
VonHayden
07/29/2025, 07:55:19 AM

Car windshield production dates can be found in the lower right corner of the front windshield. Car windshields are essential body accessories that primarily serve a protective function. There are mainly three types of car windshields: laminated glass, tempered glass, and zoned tempered glass. Laminated glass is a glass product made by bonding two or more layers of glass with one or more layers of transparent adhesive material. Tempered glass undergoes a process where low-temperature, high-speed air currents uniformly quench the glass, creating tensile stress inside the glass and compressive stress on the outer surface, resulting in the treated glass product. Zoned tempered glass is heated in a furnace to near its softening temperature, then rapidly transferred to air grids with varying cooling intensities for uneven cooling, creating different stresses in the main viewing area and the peripheral areas, resulting in the treated glass product.

Was this review help?
104
Share
JoyRose
08/13/2025, 05:12:23 PM

Hey, when it comes to checking the production date of the windshield, we car owners can easily do it ourselves—it's not difficult at all. Usually, there's a string of small dots and numbers in the corner of the glass, either the bottom left or bottom right. For example, something like '··3 · 23'—the dots indicate the month position, with the first row of dots corresponding to the 12 months (a dot in the third position means March), and the '23' represents the year 2023. Why check this? Because older glass tends to age and can shatter more easily in accidents, which affects safety. My own car is a 2019 model, and last week I checked the windshield date and found it was manufactured in 2018. After a few years of use, it had developed small cracks, so I promptly went to a repair shop to get it replaced. I recommend checking the date when buying a car or taking a quick glance at the markings in the corner of the glass during car washes to avoid long-term issues. Small habits like this can save us a lot of trouble.

Was this review help?
19
Share
Expand All
VonLayla
10/08/2025, 03:18:05 AM

As for the production date location of this windshield, simply put, look for numerical markings in the four corner edges of the glass, most commonly in the lower left corner. The marking format is a combination of dots and numbers, with dots indicating the month position when placed before. For example, if there are three rows of dots in front, dots in the third row represent March, followed by the number '22' indicating 2022. From my car repair experience, aged glass over five years old is prone to cracking, posing significant safety risks. I recommend checking this date when replacing the windshield. For newly installed parts, ensure they match the vehicle's manufacturing year to avoid warranty or insurance issues. Routine inspection isn’t difficult—just wipe off dust with a cloth and use a phone flashlight in good lighting. Detecting issues early prevents road accidents; don’t wait until small cracks turn into big gaps to panic.

Was this review help?
17
Share
Expand All
AnastasiaLee
11/21/2025, 03:37:33 AM

Where to check the production date of the windshield? I see many friends asking about this. Actually, you can find small dot codes at the corners of the glass edge. Those dots usually indicate the month, and the numbers represent the year. For example, '··2 · 21' means February 2021. Remembering this information is quite useful, especially during used car transactions, as it helps determine the condition of the glass. Old windshields are prone to aging, fogging, or cracking, which can impair visibility. It's recommended to occasionally wipe the edges and corners to check, while also maintaining cleanliness and safety.

Was this review help?
16
Share
Expand All
KathrynRose
01/11/2026, 10:25:36 PM

To find the production date of a car windshield, I often teach my kids about it in the car. The key is to look at the corner of the glass. The marking is a combination of dots or numbers, where the dots indicate the month's position. For example, three dots at the front represent March, and the following numbers like '20' stand for 2020. If the date is too old, the glass's impact resistance may be poor, risking cracks during rainy seasons or high-speed driving, especially with kids in the car. It's advisable to check the corners during monthly car washes. If the glass is over five years old, consider replacing it to ensure safe family trips. Such small details can prevent major issues.

Was this review help?
8
Share
Expand All
LaRowan
04/08/2026, 02:24:32 AM

Share some tips on checking the production date of the windshield. The date is usually marked with dot codes at the lower corner of the glass. Dots before the number indicate the month, while numbers after represent the year. For example, '·1· · 19' means January 2019. Why is this date important? Aged glass is prone to cracking due to thermal expansion and contraction, especially during summer heat exposure or winter icy roads, increasing the risk. As a car enthusiast myself, I always check and record the glass date in my notebook during each maintenance session. If the date is too old, replace it promptly to ensure clear visibility and prioritize driving safety.

Was this review help?
16
Share
Expand All
More Q&A

Why won't my Kia K5 start?

Reasons why the Kia K5 won't start: 1. Low fuel level or fuel gauge showing below the red line; 2. Faulty sensor shared by the ignition system and fuel injection system; 3. Burned-out power supply cable from the battery or damaged starter relay; 4. Excessive carbon buildup causing valve leakage, engine misfire, and poor acceleration. Correct starting procedure for the Kia K5: 1. Insert the car key into the ignition switch and turn it up one notch, pause briefly to allow the fuel pump to activate and for the fuel supply and electrical systems to self-check; 2. Ensure the gear shift is in the neutral position and depress the clutch pedal; 3. Turn the key further upward until you hear the engine start, then release the key; 4. Once the dashboard lights up, release the clutch pedal with your left foot according to proper technique while moderately pressing the accelerator pedal to allow the vehicle to start smoothly.
108
Share

Can the Chery Ant Submerge in Rainy Days?

The extent to which the Chery Ant can submerge depends on its wading depth. The maximum wading depth of the Chery Ant is approximately 135mm. The wading depth of the Chery Ant is determined by the height of the vehicle's chassis, which is the ground clearance listed in the model's parameter configuration table. Generally, the greater the ground clearance, the higher the chassis, and the higher the safety factor when passing through waterlogged roads. Therefore, in terms of safe wading depth, off-road vehicles and SUVs have obvious advantages. However, for most compact and small cars with low chassis, the position of the vehicle's air intake should be used as a benchmark when passing through waterlogged roads. If the air intake of the Chery Ant is below the water level during wading, water will be sucked into the engine's cylinders. Since water cannot be compressed like air, it will cause severe damage to the engine's mechanical components (such as connecting rods, pistons, crankshafts, etc.). Therefore, the wading depth should not exceed the height of the engine's air intake. The height of the engine's air intake, and thus the maximum wading depth, can also be increased by installing a snorkel. If wading is unavoidable, the following safe and correct operations should be performed: Before the vehicle enters the water, always turn off the automatic start-stop function to prevent the engine from restarting automatically after stalling in the water, which could cause severe damage due to water intake; Judge the underwater road conditions based on the passage of preceding vehicles and choose an appropriate entry point. Observe the path taken by other vehicles and follow their tracks at low speed, avoiding sudden acceleration or deceleration; On roads prone to waterlogging, observe warning water level markers, trees, and reference points like the wheels and doors of other vehicles to estimate the water depth before deciding whether to proceed; Know your vehicle's safe wading depth. If the water depth exceeds half of the tire height or the engine's air intake, do not enter the water recklessly; choose an alternative route instead.
106
Share

What are the differences between Toyota Land Cruiser and Prado?

Toyota Land Cruiser and Prado differences: 1. Different appearance: The front grille of the Toyota Land Cruiser is horizontal; the front grille of the Prado is vertical. 2. Different performance: The Toyota Land Cruiser has stronger off-road performance, better adaptability, and a more stable chassis, with no feeling of floating even at 130km/h; the Prado's chassis is less stable, exhibiting floating phenomena at high speeds. 3. Different displacements: The Toyota Land Cruiser comes with three displacement options: 4.0L, 4.6L, and 5.0L; the Prado has two displacement options: 2.7L and 4.0L. 4. Different dimensions: The Toyota Land Cruiser measures 5080mm in length, 1940mm in width, and 1900mm in height, with a wheelbase of 2850mm; the Prado measures 4760mm in length, 1885mm in width, and 1845mm in height, with a wheelbase of 2790mm.
113
Share

What to Do When the Wrangler Key is Locked in the Car?

Solutions for when the Wrangler key is locked in the car: You can use the spare key to open it. If the spare key is far away or cannot be found, then you will have to call a professional locksmith to unlock the car. Typically, you will need to provide proof of ownership, such as an ID card or vehicle registration. The Wrangler is a Chrysler Jeep model, and it is the top-tier version of the Chrysler Jeep Wrangler series. The Wrangler is one of the toughest models in the Jeep lineup, a true off-road vehicle. The Wrangler Rubicon is distinguished by its off-road performance integration, which enhances its rugged capabilities, features that were previously only available through aftermarket parts and high-performance modifications.
106
Share

How to test if ETC is working?

Methods to test if ETC is working: First, remove the card and insert the chip-side of the card into the electronic tag. When you hear a "beep" sound and the electronic tag screen displays "Debit Card" or "Balance," it means the system is functioning normally. If the ETC card is inserted into the electronic tag but the screen shows messages like "Electronic Tag Invalid" or "No Card Inserted," it indicates an issue with the electronic tag, and you need to visit an ETC service center to reactivate and reinstall it. ETC (Electronic Toll Collection) is a system that allows for non-stop toll payments. ETC lanes are dedicated to vehicles equipped with ETC onboard units, using electronic payment methods without manual toll booths. The ETC system works through microwave-based short-range communication between the onboard electronic tag installed on the vehicle's windshield and the microwave antenna in the ETC lane at toll stations. This data is then processed via computer network technology for backend settlement with banks, enabling vehicles to pass through toll stations without stopping to pay bridge or road fees.
116
Share

What do Volvo's T3, T4, and T5 mean?

Volvo's T3, T4, and T5 refer to different types of engines. Here are the details: Introduction to Volvo T3, T4, and T5 engines: T3 represents a 1.5T turbocharged engine, T4 represents a 2.0T low-power version turbocharged engine, and T5 represents a 2.0T high-power version engine. Additionally, in Volvo's lineup, T6 stands for a turbo + supercharged dual-charged engine, and T8 represents a 2.0T hybrid version. Differences in power among Volvo engines: T3 is a 1.5T three-cylinder engine with a maximum power of 120KW and a maximum torque of 265N·m. T4 is a 2.0T inline 4-cylinder engine with a maximum power of 140KW and a maximum torque of 300N·m. T5 is also a 2.0T inline 4-cylinder engine, but with a maximum power of 185KW and a maximum torque of 350N·m.
106
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.