···
Log in / Register

Where to Check the Fuel Consumption Display on Oshan X5?

6Answers
KiaraRose
07/29/2025, 08:21:12 AM

The fuel consumption displayed on the instrument panel can be accessed using the buttons on the right side of the steering wheel. The displayed fuel consumption is the ratio of the total distance traveled to the total fuel consumed. The average fuel consumption shown on the instrument panel is an overall average, which also includes instantaneous fuel consumption. It is highly influenced by road conditions and driving speed, so it should be used as a reference only. This function can be operated using the multi-function steering wheel. By pressing the up and down buttons on the right side to navigate to the vehicle information, and then using the left and right buttons to switch to the average fuel consumption.

Was this review help?
119
Share
NoahLee
08/13/2025, 07:12:42 PM

As a frequent driver and a novice car owner, the fuel consumption display of the Oshan X5 is mainly viewed on the dashboard. After starting the engine, sitting in the driver's seat, there is a multifunctional button group on the left side of the steering wheel. You can switch the dashboard information screen by pressing the up, down, left, and right buttons. For example, pressing the right button a few times will switch to the fuel consumption display, usually showing two modes: average fuel consumption and instantaneous fuel consumption. The average fuel consumption displays the long-term average, while the instantaneous mode shows real-time data. It's quite interesting to watch the numbers change while driving. The first time I drove on the highway, I noticed that smaller numbers indicate fuel efficiency, while they rise during city traffic jams. I recommend that novice drivers get into the habit of checking this, as it can help adjust driving habits to save money and ensure safety. Checking before refueling can also indicate whether recent driving habits have been good. The operation is simple, and the dashboard is designed to be clear and unobtrusive, positioned appropriately without affecting visibility. Don't worry about accidental operations; just press back to return.

Was this review help?
11
Share
Expand All
AngeloRose
10/08/2025, 11:14:37 PM

As a daily commuter, fuel consumption directly affects my monthly petrol budget. In the Oshan X5, the fuel consumption is displayed on the central small screen of the dashboard. After starting the vehicle, you can quickly find it by switching with the left and right navigation buttons on the steering wheel. The average fuel consumption data is reliable, displayed in liters per 100 kilometers, with lower numbers indicating better fuel efficiency. The number spikes in city traffic congestion but steadily decreases on highways, allowing me to optimize throttle pressure while driving. I recommend checking this display regularly to avoid sudden acceleration and save more money. Always prioritize safety while driving and avoid staring at the screen. The system is simple and user-friendly, making it easy for beginners to get the hang of it quickly. Oshan's feature is very practical, helping everyone develop energy-saving habits.

Was this review help?
13
Share
Expand All
MiaFitz
11/21/2025, 11:29:56 PM

As a car enthusiast, the fuel consumption information of the Oshan X5 is displayed on the multi-function dashboard. After starting the engine, simply toggle the view left and right using the steering wheel control buttons to easily see the average fuel consumption and instantaneous fuel consumption. The instantaneous display shows real-time fuel usage, reflecting the pressure on the accelerator; the average provides overall data, and pressing the menu key can reset the calculation. Watching the numbers drop on the highway is satisfying, while changes are more noticeable during city driving. The design is user-friendly and doesn't obstruct the view. The operation isn't complicated and is more intuitive than the central control screen. It's recommended to observe and adjust driving habits frequently while driving.

Was this review help?
3
Share
Expand All
Carole
01/12/2026, 01:06:02 AM

As a family user, I prioritize controlling fuel consumption costs. My Oshan X5 dashboard directly displays fuel consumption data. After starting the vehicle, I simply press the navigation button on the left side of the steering wheel to switch to the information screen and view it. The average fuel consumption is relatively stable, and the unit of liters per 100 kilometers is easy to understand. Watching the numbers change while driving reminds me to accelerate gently to save fuel and money. The numbers are higher in city driving conditions and lower on highways. I recommend this feature for beginners or moms to help monitor driving habits for safety and peace of mind. The system design is simple, so there's no need to worry about complex settings. Making it a habit can also help detect minor vehicle issues early for timely handling. The operation takes just a few seconds and doesn’t interfere with driving.

Was this review help?
5
Share
Expand All
DonovanFitz
04/08/2026, 10:04:55 PM

As an environmentally conscious driver, checking the fuel consumption of the Oshan X5 on the dashboard is simple and quick. After starting the car, use the steering wheel buttons to switch to the fuel consumption display, which shows both average and instantaneous data. Watching the numbers, I adjusted my driving style to maintain a steady speed, resulting in a noticeable drop in fuel consumption—beneficial for both the environment and my wallet. The operation is effortless with no technical jargon, making it easy even for beginners. It's recommended to check frequently to optimize driving habits for energy efficiency.

Was this review help?
5
Share
Expand All
More Q&A

What is the Difference Between Direct Injection and Electronic Fuel Injection in Cars?

The differences between direct injection and electronic fuel injection in cars are as follows: 1. Fuel injection method: Electronic fuel injection sprays fuel into the engine's intake manifold, while direct injection sprays fuel directly into the engine's cylinder. 2. Different installation positions of the fuel injector: In multi-point electronic fuel injection, the injector is installed at the end of the intake manifold, and the fuel spray is directed into the intake ports of each cylinder; the air-fuel mixture is formed outside the cylinder. In direct injection, the injector is installed on the cylinder head, spraying fuel directly into the cylinder; the air-fuel mixture is formed inside the cylinder. 3. Different fuel injection pressures: Multi-point electronic fuel injection operates at pressures between 2.5bar and 4bar, while direct injection operates at pressures between 40bar and 400bar. 4. Different fuel supply system compositions: Multi-point electronic fuel injection does not have a high-pressure fuel pump, whereas direct injection includes one. 5. Different fuel injection start angles and durations: Due to lower injection pressures, multi-point electronic fuel injection requires a longer injection time under heavy loads, and the next injection cycle may need to start after the intake valve closes. However, direct injection occurs after the intake valve opens and can take place during both the intake and compression strokes. Direct injection lowers the cylinder temperature at the moment of compression, aiding in the cooling of the piston and cylinder liner, thereby reducing the engine's tendency to knock. As a result, direct injection engines can achieve a higher compression ratio, leading to improved thermal efficiency.
115
Share

What is the fuel consumption of the CR-V 2.4L 4WD Luxury Edition?

CR-V 2.4L 4WD Luxury Edition has a fuel consumption of 11.2L/100KM. Below are the detailed specifications of the Honda CR-V: 1. Drivetrain: The Honda CR-V comes in two versions: a two-wheel-drive model and a four-wheel-drive model. The four-wheel-drive version features a front-engine, four-wheel-drive system with an on-demand all-wheel-drive configuration. 2. Powertrain: The Honda CR-V is equipped with two i-VTEC engines: a 2.0L and a 2.4L. The 2.0L engine delivers a maximum power of 114kW and a peak torque of 190N·m, while the 2.4L engine produces a maximum power of 140kW and a peak torque of 222N·m. 3. VTEC Technology: The Honda CR-V features VTEC engine technology, which stands for Variable Valve Timing and Lift Electronic Control System. Unlike conventional engines, VTEC engines differ in the number and control method of camshafts and rocker arms, featuring two distinct sets of valve drive cams for low-to-medium and high-speed operations, with automatic switching via electronic control. The VTEC system allows the engine to automatically adjust valve opening timing and lift based on driving conditions, thereby altering intake and exhaust volumes. This results in increased power output, reduced fuel consumption, and lower emissions.
108
Share

Will I Get Penalized for Driving with the Trunk Open While Carrying Items?

Driving with the trunk unclosed and in an open state is considered a traffic violation. Typically, traffic cameras do not capture this type of violation. However, if spotted by traffic police, the vehicle may be stopped, and a ticket will be issued for violating road traffic safety laws and regulations regarding road usage. Below are some precautions regarding the trunk: 1. Avoid storing flammable and explosive items: As the trunk is an enclosed space, temperatures can rise rapidly. Storing lighters, hairspray, or other flammable and explosive items in the trunk, especially during summer heat and long-distance travel, can lead to explosions with unimaginable consequences. 2. Avoid storing valuables: Keeping valuables, premium cigarettes, or fine liquor in the trunk is highly unsafe. Thieves are cunning, and it is absolutely inadvisable to leave valuables in the car trunk.
110
Share

Is Half Engagement Stepping on the Clutch Halfway?

Half engagement is stepping on the clutch halfway. Here is an introduction to half engagement: 1. Introduction: Clutch half engagement refers to the unstable connection state of the clutch, where the driver presses the clutch pedal, gradually reducing the pressure of the clutch pressure plate, causing the driving plate and the driven plate to be in a state of both rotating and slipping. During the field driving test, drivers who are not yet proficient in operation and cannot complete the required actions within the specified time often use half engagement to reduce the vehicle speed, thereby extending the operation time. However, the rules for off-field driving tests do not allow the use of half engagement. 2. Half Engagement: Half engagement is when the clutch is between disengaged and engaged, and the transmission system is between connected and disconnected, providing a flexible power source. It is frequently used in complex road conditions, as well as during starting, turning, and short-distance following. When the clutch is in the half engagement state, the friction between the pressure plate and the friction disc is minimal.
103
Share

How to Turn on the Cold Air in the 7th Generation Accord?

The cold air in the 7th generation Accord can be turned on by pressing the A/C button. AUTO means to turn on, press it once, and the fan will start working. Here are more related introductions: 1. Air Conditioning Cooling Principle: After the air conditioner is powered on, the low-pressure steam of the refrigerant in the refrigeration system is sucked in by the compressor and compressed into high-pressure steam, which is then discharged to the condenser. At the same time, the outdoor air sucked in by the axial fan flows through the condenser, taking away the heat released by the refrigerant, causing the high-pressure refrigerant steam to condense into high-pressure liquid. It exchanges heat with the outdoor air to become medium-temperature and medium-pressure refrigerant liquid, which then enters the evaporator after being throttled and depressurized by the capillary tube, evaporating under the corresponding low pressure and absorbing the surrounding heat. 2. Air Conditioning Buttons: The left and right sides respectively adjust the cold and hot air for the driver and passenger. Blue represents cold air, and red represents hot air. Adjust both sides to the lowest blue area, which means pressing the blue button to the lowest state, and then press the A/C air conditioning switch button once.
109
Share

What Should You Ask the Dealer for When Buying a New Car?

When purchasing a new car, you should request complimentary items from the dealer such as window tinting, floor mats, small gifts like cakes and perfumes, full-coverage floor mats, and reflective vests for the vehicle. Below is an introduction to related automotive content: 1. Determining Factors: The quality of a vehicle's handling is primarily determined by three factors: power, suspension, and steering system. 2. Detailed Introduction: Power is the foundation of handling. Only with strong and smooth power output can a vehicle qualify to discuss handling; Suspension is the key to handling. Generally speaking, for two cars with similar power, the difference in handling depends on the suspension. A solid and resilient suspension ensures stable and reliable handling.
105
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.