···
Log in / Register

Where to Check the Coolant Temperature of Qoros 3?

3 Answers
DiAlivia
07/29/25 11:43pm
The coolant temperature of Qoros 3 can be seen by the pointer pointing at the middle position of the temperature gauge when the water temperature is normal. Here is some information about the coolant temperature of Qoros 3: 1. Appearance: The interior space of Qoros 3 is very spacious, and the entire center console is designed with a minimalist approach. The top edge features air conditioning vents, the middle section is equipped with an 8-inch touchscreen display, and the bottom part consists of a simple air conditioning control area, aiming for a clean and neat visual effect. 2. Precautions: There is usually a red zone on the right side of the temperature gauge indicating the high-temperature area. When the pointer approaches this area, it indicates that the water temperature is relatively high. During driving, especially in summer, it is common for the coolant temperature to become too high or even boil over. When noticing the water temperature is too high, correct emergency measures should be taken, and forced driving should be avoided to prevent severe damage to the engine.
Was this review help?
11
1
Share
Luis
08/16/25 2:58am
I've been driving the Qoros 3 for several years now, and the coolant temperature is displayed right on the dashboard, typically on the screen directly in front of the driver's seat. There's a thermometer-like icon on the left, clearly indicating the current water temperature. If you have a newer model, it might be shown directly in the middle of the digital instrument cluster—just check the number of bars. For older models, it's in a similar position. The coolant temperature controls the engine's cooling system, and I often keep an eye on it during highway driving. If the needle keeps moving toward the H zone, it indicates overheating, and I recommend pulling over immediately to check the antifreeze or the fan. Normally, it should hover around 90 degrees. If it's too high, it can damage the engine; if it's too low, it affects warm-up time. Remember to have the mechanic check the accuracy of the gauge during regular maintenance—don't wait until the red warning light comes on. Make it a habit to glance at the temperature gauge before parking to ensure driving safety and prolong your car's lifespan.
Was this review help?
10
2
Share
Expand All
DelJayla
10/19/25 3:44am
When I first got my Qoros 3, I was also confused about where to check the coolant temperature. Later, the salesperson told me it's located on the left side of the dashboard with a small thermometer icon. It's quite simple to operate: after starting the engine, just look over from the steering wheel and you'll spot it - whether digital or analog display, it's clearly visible. When the temperature gets too high, a warning light will flash, indicating potential system blockage or leaks. As a daily commuter, I've noticed significant temperature fluctuations between winter and summer. In summer with AC on, more frequent checks are needed, while winter tends to have longer cold-start times. I recommend cleaning the radiator grille dust quarterly to maintain stable water temperature within normal range and avoid roadside breakdowns. Developing this habit has made driving much more worry-free.
Was this review help?
13
5
Share
Expand All
More Forum Discussions

Where to Collect the Inspection Exemption Label for Vehicles?

Vehicle inspection exemption labels can be obtained at the local vehicle management office or through the Traffic Management 12123 App without any fees. Below is some information about the inspection exemption label for vehicles: 1. Vehicle Management Office: If applying at the vehicle management office, the vehicle owner needs to bring the vehicle's driving license (original and copy), the ID card of the vehicle owner, the compulsory traffic insurance policy of the vehicle, and other relevant documents. Before processing, all traffic violation fines must be settled. 2. 12123 App: On the homepage of the Traffic Management App, find the 'Apply for Inspection Exemption Label' option, click on it, and then select the vehicle status option. Click 'Query,' and a prompt box for handling the annual inspection service will appear. Read the prompt information carefully, confirm, and click 'Continue Processing.' Fill in the vehicle information as required, review the prompt information, confirm, and click 'Next' to complete the application for the inspection exemption label.
17
3
Share

How to install the alternator belt on a Mercedes-Benz GLA?

Installation method for the alternator belt on a Mercedes-Benz GLA: 1. Loosen the generator fixing screw and the belt tension adjustment screw; 2. Push the generator towards the engine to minimize the distance between the pulleys, then place the belt on and align it properly; 3. Adjust the belt tension to the appropriate level, and tighten the engine fixing screw and adjustment screw. The Mercedes-Benz GLA is a compact SUV introduced by Beijing Benz, with dimensions of 4427mm in length, 1834mm in width, and 1610mm in height, and a wheelbase of 2729mm. It is equipped with a 1.3T turbocharged engine, delivering a maximum power of 100kw, and matched with a 7-speed dual-clutch or 8-speed dual-clutch transmission.
11
0
Share

Can a C1 License Drive Yellow License Plate Vehicles?

C1 license cannot drive yellow license plate vehicles, it only permits driving blue license plate vehicles. Yellow license plate vehicles typically refer to heavy-duty or large vehicles, which require a B-class license or above to operate. The C1 license is designated for small and micro passenger vehicles, as well as light, micro, and small special-purpose vehicles. The full name of a driver's license is the motor vehicle driving license, which is a legal document issued by the administrative authorities after a person who is legally allowed to learn to drive a motor vehicle has studied and mastered traffic regulations and driving skills, and passed the relevant tests. Driving a motor vehicle requires certain driving skills. Without these skills, driving a motor vehicle arbitrarily may lead to traffic accidents. Generally, individuals cannot drive on the road without a license.
14
0
Share

How much engine oil should be added to a Mondeo?

Mondeo requires 4.5 liters of engine oil. If it's a major overhaul without activation, approximately 5 liters are needed. The specific steps for adding engine oil are as follows: 1. Open the driver's side door; 2. Pull the hood release lever located on the left side of the driver's leg area; 3. Open the hood; 4. Unscrew the engine oil cap and add the engine oil; 5. The oil level should be between the upper and lower marks on the dipstick. The Mondeo is a mid-size car introduced by Changan Ford, with dimensions of 4873mm in length, 1852mm in width, and 1470mm in height, and a wheelbase of 2850mm. It is equipped with either a 1.5T or 2.0T turbocharged engine, with maximum power outputs of 134kw and 152kw respectively, paired with a 6-speed automatic transmission.
14
2
Share

How to Obtain the Vehicle Environmental Protection Label?

Vehicle environmental protection labels can be obtained at the vehicle management office. Owners need to bring their vehicle license, motor vehicle registration certificate, and their own ID card. The steps are as follows: 1. Submit the required documents at the issuance window of the vehicle management office; 2. The vehicle management office will review the documents; 3. Upon successful review, the vehicle management office will issue and print the classification label; 4. The applicant fills out the registration form; 5. The applicant receives the label and retrieves their valid documents. The vehicle environmental protection label is a classification label for motor vehicle emission standards issued by the state, categorized into yellow and green labels. It is issued after reviewing the vehicle type and emission standards, aiming to facilitate energy-saving and emission-reduction inspections and regular environmental protection checks for vehicles.
15
2
Share

What to do if a car window can only go down but not up?

Solutions for a car window that can only go down but not up include: 1. Initialize the window, which is usually caused by a malfunction in the window control system; 2. Remove dirt from the window lift channel by inserting a chopstick wrapped in a wet towel into the guide channel and moving it up and down to clean; 3. Apply lubricant or replace the window seal. Most cases where the car window cannot move up or down are due to mechanical jamming, and applying some lubricant after cleaning the guide rails should resolve the issue. Car window regulators can be structurally categorized into arm-type regulators and flexible-type regulators. Arm-type regulators include single-arm regulators and double-arm regulators, while flexible-type regulators include cable-type regulators, belt-type regulators, and flexible-shaft-type regulators.
9
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.