Where to Cancel a Driver's License Test Appointment?

What does it mean to avoid the sun while waiting at a red light?

To avoid direct sunlight, some car owners stop in the shade of trees or tall buildings, leaving a long stretch of road empty in front of them. This affects the normal passage of vehicles behind them. A junction that could have been passed in just one traffic light cycle now requires waiting for an additional cycle. This behavior is illegal. Here is some relevant information: 1. According to the Road Traffic Safety Law: When a motor vehicle passes through an intersection controlled by traffic signals and encounters a stop signal, it should stop in sequence behind the stop line. If there is no stop line, it should stop outside the intersection. However, the law does not explicitly mention that such sun-avoidance behaviors are illegal. 2. Increased safety hazards: Some car owners may also stop in non-motorized vehicle lanes to "seek shade" while waiting for a red light. This may force non-motorized vehicles onto the motor vehicle lane, increasing safety hazards on the road.

11

4

Share

Buick Regal shows 40% oil life remaining, does it need maintenance?

Buick Regal shows 40% oil life remaining, which means maintenance is not immediately required. Oil life is not the same as oil quantity; it's merely a maintenance reminder. If the maintenance reminder was reset after the last service by the technician, you can continue driving until the oil life drops below 10% before scheduling maintenance. Below is an introduction to car maintenance: 1. Introduction to car maintenance: Car maintenance refers to the regular preventive work of inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of a vehicle, also known as vehicle upkeep. 2. Scope of car maintenance: Modern car maintenance primarily includes the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, and more. 3. Purpose of car maintenance: The purpose of car maintenance is to keep the vehicle clean, maintain normal technical conditions, eliminate potential hazards, prevent faults, slow down the deterioration process, and extend the vehicle's service life.

8

3

Share

Does the Changan CS75 have a walk-away auto-lock feature?

Changan CS75 has a walk-away auto-lock feature. As long as the car key and the vehicle reach a certain distance, the vehicle will automatically lock to prevent theft. Since its launch in April 2014, the sales of Changan CS75 have exceeded 1 million units. From October 2019, it ranked second in China's SUV sales for five consecutive months. Here is an introduction to the Changan CS75: 1. Exterior design: Originating from Changan's global R&D platform, the design incorporates international avant-garde elements, creating a new urban SUV with a highly aesthetic appeal. The overall appearance is bold and rugged, with a powerful body that exudes strength and tension while maintaining harmony and stability. Its imposing presence is captivating at first glance. 2. Interior: The multi-layered, three-dimensional dual-barrel instrument panel is paired with a 3.5-inch TFT color display (7-inch LCD instrument panel). The use of fashionable colors and lighting makes various driving information clear at a glance.

19

0

Share

How to reset the maintenance reminder on the 2018 Lamando?

There are two methods to reset the maintenance reminder on the 2018 Lamando. The detailed descriptions of these methods are as follows: 1. Turn off the ignition switch to shut down the vehicle. Use your finger to press and hold the "0.0" button located below the instrument panel to reset the maintenance reminder: Press and hold the "0.0" button below the instrument panel with your left index finger, then use your right hand to turn on the ignition switch. Keep holding the "0.0" button until the instrument panel displays the English letters for maintenance service, then release the button. Within 30 seconds after releasing, press the "0.0" button below the instrument panel again, and the maintenance reminder will be reset. 2. For Lamando models equipped with the MIB infotainment system display, the maintenance reminder needs to be cleared through the infotainment system: Turn on the ignition switch, press the CAR button in the lower left corner, click on the settings in the lower right corner of the screen, swipe up to find the maintenance option, click on "Reset maintenance information," and confirm to clear the maintenance reminder.

16

5

Share

How many colors are available for the Changan Benben?

Changan Benben mini comes in 10 colors: Miracle Yellow, Elite Gray, Snowman White, Elf Purple, Karting Golden Yellow, Premium Red, Mary Blue, Thunder Gray, Interstellar Black, Whirlwind Orange Yellow, and Fairy Sword Blue. The Changan Benben MINI is a brand-new A00-class strategic model launched in 2010 by Chongqing Changan Automobile Co., Ltd., a subsidiary of China Changan Automobile Group, and has already entered the market. Below is an introduction to the Changan Benben: 1. Body dimensions: The Changan Benben has a length of 3525mm, width of 1650mm, height of 1550mm, a wheelbase of 2365mm, and front and rear track widths of 1400mm and 1385mm respectively. 2. Powertrain: The Benben is equipped with a new 1.3L all-aluminum engine, which provides strong power while also featuring a long service life, high power output, low vibration, low noise, low fuel consumption, and low emissions.

5

3

Share

What is the difference in fuel consumption between 3.0t and 2.0t?

If the same vehicle model is equipped with these two different engines, the difference in fuel consumption is between 3 to 5 liters. Here are three methods to reduce vehicle fuel consumption: 1. Control driving speed: The most economical speed is when the vehicle operates in direct drive or overdrive, which results in the lowest fuel consumption. Driving at different speeds on the same road leads to varying fuel consumption. Therefore, maintaining a specific speed that minimizes fuel consumption is ideal. Driving at medium speed in direct drive or high gear can help save fuel. 2. Gear selection: The choice of gear and shifting actions significantly impact fuel consumption. When starting, select the appropriate gear based on load and road conditions. During driving, if you feel a lack of power, downshift promptly instead of solely relying on pressing the accelerator, as excessive throttle usage increases fuel consumption. 3. Vehicle temperature: Engine temperature directly affects fuel efficiency. Both excessively high and low temperatures lead to increased fuel consumption. The engine’s operating water temperature should be maintained between 80°C and 90°C. Preheating the engine before starting in cold conditions can significantly save fuel.

18

1

Share

Where to Cancel a Driver's License Test Appointment?

What does it mean to avoid the sun while waiting at a red light?

Buick Regal shows 40% oil life remaining, does it need maintenance?

Does the Changan CS75 have a walk-away auto-lock feature?

How to reset the maintenance reminder on the 2018 Lamando?

How many colors are available for the Changan Benben?

What is the difference in fuel consumption between 3.0t and 2.0t?

What is a RAM exhaust?

What is the reason for the Mercedes-Benz GLA indicating inability to engage reverse gear?

What Does Synchronizer Gear Shifting Mean?

What type of gasoline should be used for the Mercedes-Benz E260?