Where to Buy HiPhi X New Energy Vehicle?

How to Steer the Wheel When Driving on Curves?

There are three main considerations for steering the wheel when driving on curves. Below is an introduction to steering the wheel on curves: 1. At the entrance: Generally, there are two directions, left entrance and right entrance. For a left entrance, the vehicle should stay close to the right line before turning the wheel to the left. For a right entrance, the opposite applies—the vehicle should stay close to the left line before turning the wheel to the right. This is to account for the inner wheel difference and avoid the rear wheels crossing the line during the turn. 2. During the drive: Keep the front of the car aligned with the edge line. Taking a left entrance as an example, when the right corner of the car touches the right line, turn the wheel one full turn to the left, keeping the left corner of the car at a certain angle to the line on the ground, and follow the right line of the first curve of the S-path. This ensures the car does not cross or go off the line. When reaching the second curve, follow the same method as the first curve. Additionally, maintain a slow speed and check the left and right rearview mirrors to see if the wheels are crossing the yellow line. Adjust the steering based on the distance between the wheels and the yellow line. 3. Exiting the S-curve: Pay attention to the two directions—left exit and right exit. For a left exit, when the front wheels are just about to leave, turn the wheel half a turn to the right to prevent the rear wheels from crossing the line. For a right exit, do the opposite—when the front wheels are just about to leave, turn the wheel half a turn to the left to prevent the rear wheels from crossing the line.

16

2

Share

What does the P gear in an automatic transmission mean?

Automatic transmission P gear stands for parking gear. The detailed introduction of automatic transmission P gear is as follows: 1. The P in P gear is the first letter of the English word 'park', so in the gear positions of an automatic transmission car, P gear is the symbol for parking gear. When this gear is engaged, the parking lock mechanism locks the transmission output shaft, meaning the car wheels are mechanically locked to prevent rolling. Note: After parking, even if you engage the P gear, never forget to pull the handbrake. 2. In addition to putting the transmission into neutral mode, the P gear also has a pawl inside the transmission that locks the gear on the output shaft to form a mechanical lock, thereby securing the drive axle to fix the vehicle in a stationary or slightly moving state.

9

3

Share

Which car brand has five vertical lines?

Five vertical lines represent the WM Motor brand. Here is some information about WM Motor: 1. The core part of the WM Motor logo consists of five rounded bars, symbolizing vehicles driving intelligently and orderly on the road. The outline of a perfect circle represents the sustainable and perfect ecological environment that WM Motor pursues; 2. The name WM Motor (WELTMEISTER) is derived from the German word for 'world champion' (Weltmeister). At the same time, WM Motor adheres to the brand philosophy of 'Intelligence for Every You,' dedicated to bringing technology to the daily lives of ordinary people; 3. WM Motor is a Chinese-made pure electric vehicle brand. Currently, WM Motor has only released one pure electric vehicle, positioned as an intelligent pure electric SUV. This car is called the WM EX5 and is also the first mass-produced vehicle from WM Motor.

16

1

Share

What Does Imported Car Mean?

Imported cars refer to vehicles that are not manufactured by domestic enterprises or joint ventures, meaning models produced by overseas automobile manufacturers are called imported cars. Imported cars are divided into two types: 1. Parallel imported cars: Non-national standard models, which can only be purchased overseas or obtained at ports. Parallel imported cars offer a wide range of models, purchased directly from abroad without going through manufacturers, resulting in lower costs. 2. China-spec imported cars: National standard models, obtained from 4S stores. They come with a comprehensive after-sales service network system, better suited to China's fuel quality, road conditions, climate, and other usage conditions, but are priced higher.

13

0

Share

Which car brand features the 'Song' logo?

The 'Song' logo belongs to BYD brand vehicles. Detailed information about this model is as follows: 1. The fuel version Song has a guide price range of 79,800-119,800 yuan, positioned at the transitional level between entry-level and mainstream consumer segments, standing out as one of the excellent models in this price bracket. 2. With body dimensions of 4600*1830*1700mm and a 2600mm wheelbase, this compact SUV offers reasonably expanded cabin space and ample cargo capacity. The trunk can be expanded to a maximum depth of 1.86 meters with a nearly flat floor, demonstrating high practicality. 3. Powered by a 1.5T direct-injection turbocharged engine delivering 113kW maximum power and 240N·m peak torque, it pairs with either a 6-speed manual or 6-speed wet dual-clutch transmission, achieving first-class performance and fuel efficiency in its class and price range. 4. Safety features include standard ESP stability control system, with front MacPherson and rear multi-link independent suspension configurations, meeting satisfactory standards for both safety and ride comfort.

10

5

Share

What does hold mean in a car?

The hold function in a car refers to the auto hold feature, which is used to control the auto hold switch. Relevant information is as follows: 1. The auto hold function adjusts the car to the most efficient driving state based on different road conditions. On extremely poor road surfaces, this button can effectively prevent the transmission from frequently shifting gears. Additionally, during overtaking, it can also serve to force downshifting. 2. To activate this function, simply press the hold button while in D gear. The car's transmission will then maintain in the second, third, or fourth gear. Pressing the hold button in third gear will keep the car in the second or third gear, while pressing it in second gear will maintain the car in second gear. Using this button does not cause any harm to the transmission.

2

1

Share

Where to Buy HiPhi X New Energy Vehicle?

How to Steer the Wheel When Driving on Curves?

What does the P gear in an automatic transmission mean?

Which car brand has five vertical lines?

What Does Imported Car Mean?

Which car brand features the 'Song' logo?

What does hold mean in a car?

Is Wheel Balancing Necessary After Tire Repair?

What do the letter markings on an automatic transmission car mean?

Can Car Wheels Be Replaced Randomly?

What is the horsepower of the Hongqi HS7?