Where to Apply for Vehicle ETC?

1 Answers
Ricardo
07/30/25 2:19am
ETC can be applied for at bank branches, highway service areas, and other institutions, as well as through mobile apps and other internet platforms. To apply, you need to provide the original and photocopy of the vehicle owner's valid ID and vehicle registration certificate. If the application is not made by the owner, the agent must also bring their valid ID. The photocopy of the vehicle registration certificate should include the page with the most recent annual inspection stamp. Additionally, you need to fill out a Postal Savings credit card application form, which will be used to bind the ETC card. After obtaining the credit card, swipe it twice and present the POS receipt to a designated Postal Savings branch to receive and install the ETC onboard device for free, with no additional charges. Applicants must be between 18 and 60 years old and own a vehicle registered under their name. ETC stands for Electronic Toll Collection, meaning electronic toll system. Here are some precautions for installing ETC: Do not obstruct the driver's view; it is best to install it behind the rearview mirror: Many car models have steeply angled windshields, which can reduce the driver's field of vision. If this is not considered during ETC installation, it may increase the driver's blind spots. Install it on the right side behind the rearview mirror to avoid obstructing the view. Do not interfere with charging: The ETC electronic tag consumes power, but generally does not require charging or battery replacement because it has a solar panel on the back that can charge itself. Therefore, during installation, avoid the blackened areas on the windshield and positions that may block the solar panel. Once installed, do not remove it arbitrarily: The button in the middle of the adhesive is an anti-tamper lever connected to a switch. After installation, the windshield will press the anti-tamper lever in. If the tag is removed arbitrarily, the lever will pop out and trigger the switch, locking the electronic tag and rendering it unusable. You will then need to visit an ETC service point to unlock it. This is designed to prevent multiple vehicles from sharing one device. When using ETC, note the following: The ETC transaction sensing range is 8 meters. To avoid paying for the vehicle in front due to its faulty ETC device, maintain a distance of at least 10 meters from the vehicle ahead. The ETC lane recognition speed is 20 kilometers per hour; driving too fast may result in failure to read the vehicle's device information and cause payment failure. When using a debit card to bind ETC, insufficient balance may also lead to payment failure.
Was this review help?
8
0
Share
More Forum Discussions

How Many Points Are Deducted for Stalling During Hill Start?

In Subject 2 (Driving Test), stalling during hill start will result in a deduction of 10 points. Reason: The examinee may not be accustomed to the clutch of the test vehicle, leading to improper coordination between the clutch and brake during hill start. When releasing the clutch to the semi-engaged position, the brake should also be released slowly, alternating between the clutch and brake with gradual and slow movements. Stalling during hill start results in a 20-point deduction. Hill start test requirements: If the vehicle stops and the front or rear bumper extends beyond 50 cm, it is considered a failure. If the vehicle stops and the front bumper (or the front axle for motorcycles) is not aligned with the pole line but remains within 50 cm, 10 points are deducted (previously 20 points). If the vehicle stops and the body is more than 30 cm away from the road edge line, 10 points are deducted (previously 20 points). If the vehicle starts but rolls backward between 30 cm and 50 cm, 20 points are deducted. If the vehicle rolls backward more than 50 cm after starting, it is considered a failure. Stalling on the slope results in a 20-point deduction. If the vehicle fails to start within 30 seconds after stopping, it is considered a timeout failure.
16
0
Share

How to Open the Hood of a Kia K3?

The method to open the hood of a Kia K3 is as follows: 1. There is a lever near the driver's left knee; pull it upwards to release the hood. 2. Locate the latch beneath the emblem on the opened hood. 3. Pull the latch to fully open the hood. Taking the 2021 Kia K3 as an example, it is a compact car with body dimensions of 4660mm in length, 1780mm in width, and 1450mm in height, with a wheelbase of 2700mm and a fuel tank capacity of 53 liters. The 2021 Kia K3 is equipped with a 1.4T turbocharged engine, delivering a maximum horsepower of 130PS, a maximum power of 96kW, and a maximum torque of 211Nm, paired with a 7-speed dual-clutch transmission.
15
1
Share

Where is the reverse gear position in a manual transmission?

Manual transmission reverse gear position is the R gear. On the shift lever of manual transmission cars, there are markings. The reverse gear in automatic transmission cars is also the R gear. After shifting into R gear, the reverse gear will engage, allowing the car to move backward. Most manual transmission cars do not have a synchronizer for the reverse gear. The correct method to start a manual transmission car is: 1. Fully depress the clutch; 2. Shift into 1st gear; 3. Turn on the left turn signal; 4. Honk the horn as a reminder; 5. Release the handbrake; 6. Gently lift the clutch with the left foot; 7. The vehicle starts moving, keep the clutch steady with the left foot, avoid pressing down or lifting to prevent stalling; 8. After holding steady for 3 seconds, slowly release the clutch while gently pressing the accelerator with the right foot, then slowly release the accelerator, fully depress the clutch to shift into 2nd gear, and repeat this process to shift into 3rd gear, completing a smooth start.
18
5
Share

What are the precautions for driving on slopes?

Precautions for driving on slopes include: 1. Maintain your lane while driving and avoid swaying or crossing the road centerline; 2. Shift to a lower gear when descending steep or long slopes; 3. Do not coast in neutral or with the engine off when going downhill; 4. When going uphill, be aware of blind spots on the slope and avoid overtaking; 5. In case of prolonged traffic congestion on a slope, do not constantly press the brake—instead, engage the handbrake firmly to prevent rolling back; 6. Utilize engine braking to reduce the vehicle's coasting speed when descending; 7. Avoid shifting gears while on an uphill slope whenever possible; 8. If gear shifting is necessary, adjust the gear before starting the ascent; 9. Control the vehicle's speed when descending and prepare to reduce speed in advance; 10. Use engine braking to manage speed, applying intermittent braking (pump the brakes) rather than prolonged or emergency braking.
18
5
Share

What are the body dimensions of the Buick Enclave?

Buick Enclave's body dimensions are: length 4981mm, width 1953mm, height 1727mm, wheelbase 2863mm, fuel tank capacity 73L, minimum ground clearance 180mm, trunk volume 222L, curb weight 1880kg. The Buick Enclave features MacPherson strut front suspension and five-link independent rear suspension. It is equipped with a 2.0T turbocharged engine delivering maximum horsepower of 237PS, maximum power of 174kW, and maximum torque of 350Nm, paired with a 9-speed automatic transmission.
8
0
Share

What to Do If a BMW Wheel Hub Gets Scratched?

The solutions for a scratched BMW wheel hub are: 1. Clean the wheel hub: Check all scratches, the depth of the scratches, and whether the wheel hub is broken, then clean the wheel hub and dry it with a towel; 2. Spray paint and apply oil: After applying putty, repaint the wheel hub. Before spraying, use old newspapers to isolate the edges of the wheel hub to avoid getting spray on the tire surface. Aim the wheel hub spray at the applied putty and spray back and forth a few times; 3. Fill the wheel hub scratches: The scratched areas of the wheel hub may be rough, so it is necessary to smooth them with fine sandpaper. Use wet sandpaper to sand the scratched areas repeatedly until smooth, then apply putty evenly.
16
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.