···
Log in / Register

Where to Apply for ETC for Multiple Vehicles Under One Name?

4 Answers
McNicole
07/29/25 10:18pm

If you have multiple vehicles under your name, you can bring your ID card to a bank to sign up for ETC service. After completing the application, you can directly install and activate the device. Alternatively, you can take the bank agreement to an ETC service outlet for installation and activation. The ETC installation process is as follows: Upon receiving the device, first check if the ETC card and electronic tag (OBU) are damaged. Press the anti-tamper button on the back of the OBU. A red light will briefly illuminate, and the OLED screen will display "Tag Invalid, Please Insert Card," indicating the device is functioning properly. Clean the front windshield, ensuring the surface is smooth, clean, and dry. Then peel off the protective film on the OBU adhesive and attach it to the installation position. Press firmly for 2-3 minutes to remove any air bubbles. Insert the ETC card with the front facing the driver and the back facing the windshield. The chip should be inserted into the OBU device. Benefits of installing ETC: Time-saving: Eliminates the hassle of waiting in queues; Green and eco-friendly: Promotes low-carbon travel by allowing vehicles to pass through toll stations without stopping, reducing noise and exhaust emissions and minimizing pollution; Cost-efficient: Saves money by reducing the frequency of vehicle starts and brakes, lowering wear and fuel consumption. Users also enjoy a 5% discount on toll fees; Improved efficiency: ETC lanes can theoretically increase traffic efficiency by 2-3 times, making traditional ETC systems more updated, faster, and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous.

Was this review help?
13
1
Share
DiNatalie
08/15/25 10:48pm

I have multiple cars under my name, and when applying for ETC, I preferred nearby banks like ICBC or CCB branches, which offer a one-stop solution for all vehicles. For each car, you need to bring the vehicle license, the owner's original ID card, and a bank card for fee deduction. The bank staff will help you fill out the forms and apply for the devices, allowing you to complete the process for all cars at once, saving time and hassle. With my busy work schedule and family commitments, this method avoids the need to visit multiple locations, and there are additional benefits like bank card reward points, making it quite cost-effective. After completing the process, remember to test the device and ensure that toll deductions work properly to guarantee smooth travel.

Was this review help?
1
2
Share
Expand All
Natasha
10/18/25 2:09am

I went to an ETC service outlet to handle the ETC for multiple cars under my name. It was convenient to find a spot near the city highway exit. I brought my ID card and each car's vehicle license to fill out the application form, and the staff quickly got it done, with each car independently bound to a device. For young people with a fast-paced life, the trick is to use Gaode or Baidu Maps to search for ETC service points and go during off-peak hours to avoid queues. Since I drive a lot, ETC saves time at toll booths, and it's a good idea to bind a credit card for discounts. Managing multiple cars under one account isn't difficult, just make sure the signal is strong during the initial setup.

Was this review help?
13
4
Share
Expand All
DelArabella
12/01/25 2:48am

I have three cars all equipped with ETC, and the most reliable way is to handle it directly at the designated outlets of the highway company. Bring the vehicle registration certificate and ID card for each car to quickly apply for device installation. Years of driving experience tell me that choosing such professional outlets saves trouble, completing all procedures at once without running around to multiple places. Safety always comes first when driving, so make sure the ETC device is securely installed and check the deductions regularly to avoid errors. Online platforms also offer applications, but the old-school approach of going in person gives more peace of mind and solves problems efficiently.

Was this review help?
9
5
Share
Expand All
More Forum Discussions

How to Turn on High Beam Headlights in Volkswagen?

Here are the steps to turn on high beam headlights in Volkswagen: 1. Turn the knob below the left side of the steering wheel to the right to activate the low beam headlights. 2. Push or pull the control lever on the left side of the steering wheel to switch between low beam and high beam headlights. Below are the correct ways to use Volkswagen headlights: 1. When meeting another vehicle at night, switch to low beam headlights when the distance is more than 150 meters. 2. Use low beam headlights when meeting non-motorized vehicles on narrow roads or bridges at night. 3. When turning at an intersection controlled by traffic lights at night, use low beam headlights. 4. Use low beam headlights when driving close to the vehicle in front in the same direction. Drive with low beam headlights on well-lit roads.
17
2
Share

How to Replace the Air Filter in a BMW 5 Series?

Method for replacing the air filter in a BMW 5 Series: 1. Open the engine hood and locate the air filter housing. 2. Unclip the two fasteners securing the housing cover to lift the entire air filter housing cover. 3. Lift the air filter housing cover and remove the old air filter. 4. Install the new air filter, replace the housing cover, and secure the fasteners. Taking the BMW 5 Series 2021 525Li Luxury Package as an example, here are its specifications: 1. Body dimensions: length, width, and height are 5106mm, 1868mm, and 1500mm respectively, with a wheelbase of 3105mm. 2. Powertrain: equipped with a 2.0T turbocharged engine, delivering a maximum power of 135kw, paired with an 8-speed automatic transmission.
8
0
Share

Where is the engine number located on the Buick Excelle?

The engine number of the Buick Excelle is located in the engine compartment, specifically in the area below the engine pulley, which makes it relatively easy to find. Generally, the position of the engine number varies depending on the car model and brand. Below is some relevant information about engine numbers: 1. The engine number is the unique identifier of the engine, much like a person's ID card, with each engine having a distinct number. Typically, the engine number consists of several parts, including the product code, number of cylinders, manufacturing information, and structural features. 2. The engine number is usually located below the spark plugs, though some models may have it engraved on a nameplate in the engine compartment. For the exact location, you can consult the staff at a 4S store or refer to the car's factory manual.
8
3
Share

How to Reset the Golf Tire Pressure Monitoring?

The tire pressure monitoring alarm in the Golf can be reset using the tire pressure reset button. Below is a detailed introduction on how to reset the Golf tire pressure monitoring: 1. The tire pressure reset button is located around the gear shift lever. Press and hold it for 3-5 seconds to turn off the tire pressure warning light: The tire pressure monitoring indicator light is a warning method for the owner based on tire pressure and other issues. When encountering uneven road surfaces during driving, the tires bear different forces, causing changes in tire pressure, which will trigger the indicator light. 2. After replacing tires or inflating them, reset the tire pressure promptly: Regular maintenance of the car tires is essential to ensure the car's normal operation. After replacing tires or inflating them, the tire pressure monitoring system may alarm due to changes in tire pressure, so it is necessary to reset the tire pressure promptly to avoid triggering the tire pressure monitoring warning light.
2
0
Share

What is the relationship between Kaiyi and Chery?

Kaiyi belongs to Chery Holding Group. Kaiyi is an independent brand, and this brand has many SUV models. The SUVs under Kaiyi include the X3, X5, Xuanjie, X7, V3, etc. Taking the Xuanjie as an example, it is a compact SUV with a length, width, and height of 4400mm, 1831mm, and 1653mm respectively, and a wheelbase of 2632mm. The Xuanjie is equipped with a 1.5-liter naturally aspirated engine across the entire lineup. This engine has a maximum power of 85kW and a maximum torque of 143Nm. It features DVVT technology and multi-point electronic fuel injection technology, and uses an aluminum alloy cylinder head and cast iron cylinder block. It is paired with either a 5-speed manual transmission or a CVT transmission.
3
5
Share

What type of engine oil is suitable for Nissan Teana?

Nissan Teana can use fully synthetic engine oils with specifications of 0W-30, 5W-30SN, and 0W-40SN. More details about the engine oil for Teana are as follows: 1. Nissan Teana can choose engine oil according to the user manual: Nissan Teana uses fully synthetic engine oil with 0W-30 specification. According to the user manual, semi-synthetic engine oil (minimum requirement) can be used, but it is best to choose fully synthetic engine oil. 2. The fully synthetic engine oil with 5W-30SN specification is the best choice for Nissan Teana: The 0W-40SN specification engine oil can also be used. Fully synthetic engine oils from Mobil, Shell, or Castrol with 0W-40SN specification are all suitable for Teana. At the same time, any engine oil that meets the SAE certification level can be used.
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.