Where to Apply for a Replacement Motor Vehicle Driver's License?

1 Answers
VonAmir
07/29/25 6:50pm
To apply for a replacement driver's license, you need to bring the original ID card and two copies, several one-inch white background photos (bareheaded, taken within the last three months). After gathering these materials, go to the relevant service window at the vehicle management office and queue up for processing. It is important to note that the replacement of a driver's license can only be done by the person themselves and cannot be handled by others. Relevant details are as follows: 1. Apply as soon as possible: If you find that your driver's license is lost, don't panic, and go to the vehicle management office to apply for a replacement as soon as possible. The replacement of a driver's license can only be done by the person themselves and cannot be handled by others. As long as the demerit points on the driver's license do not exceed 12 points, you can apply for a replacement. The replacement does not need to be done at the vehicle management office where the license was originally issued; it can also be processed at vehicle management offices in other locations. 2. Temporary driver's license: If the vehicle management office does not issue a new driver's license on the spot, you are not allowed to drive during the replacement period, but you can apply for a temporary driver's license when applying for the replacement. Temporary driver's licenses are mainly for the convenience of those replacing their driver's licenses and for foreigners driving vehicles in China, with a validity period of generally three months.
Was this review help?
16
1
Share
More Forum Discussions

Where is the battery located in the Cadillac ATS-L?

The battery of the Cadillac ATS-L is located on the left side of the trunk. After opening the trunk lid, remove the left interior panel to reveal the battery. The Cadillac ATS-L is a luxury car brand under the General Motors Group, with body dimensions of 4730mm in length, 1824mm in width, and 1426mm in height, and a wheelbase of 2860mm. In terms of exterior design, the overall styling of the Cadillac ATS-L is consistent with the standard wheelbase version, with noticeable improvements in rear space. The wide grille, accentuated by the small grille details within the mesh, gives the car a more three-dimensional appearance.
14
2
Share

What is the normal tire pressure for ATS-L?

The normal tire pressure generally ranges between 2.4 and 2.6. Excessive tire pressure can overstretch and deform the tire cords, reducing the elasticity of the tire body and increasing the load on the car during driving. Insufficient tire pressure can cause greater deformation of the tire body, leading to cracks on the tire side and generating flexing motion, which results in excessive heat. Tire pressure is closely related to the vehicle's performance, such as comfort and load capacity, and also affects the lifespan of the tires. Air pressure is the lifeline of tires; only within the normal tire pressure range can the vehicle perform optimally. If the tire pressure is abnormal, it is recommended to adjust it promptly at a 4S shop.
2
5
Share

Where is the battery located in a Cadillac ATS-L?

The battery in a Cadillac ATS-L is located on the left side of the trunk. Steps to remove and install the battery in a Cadillac ATS-L: 1. Ensure the car is turned off and all electrical devices are switched off; 2. First disconnect the negative terminal cable (black), then disconnect the positive terminal cable (red), remove the battery securing components, and take out the old battery; 3. Clean the connection points between the battery terminals and cables, install the new battery, secure the battery fixing components, tighten the positive terminal cable, and then tighten the negative terminal cable. Taking the 2017 Cadillac ATS-L as an example: it is equipped with a 2.0-liter turbocharged engine, delivering a maximum horsepower of 279 HP and a maximum torque of 400 Nm.
11
1
Share

What is the horsepower of the Cadillac ATS?

The maximum horsepower of the Cadillac ATS is 279 hp. Cadillac is a car under SAIC-GM-Cadillac, equipped with a 2.0T turbocharged engine, paired with an 8-speed automatic manual transmission, with a maximum power of 205 kW and a maximum torque of 400 Nm. The exterior dimensions of the Cadillac ATS are 4730 mm in length, 1824 mm in width, and 1426 mm in height, with a wheelbase of 2860 mm and a minimum ground clearance of 117 mm. The body structure is a 4-door, 5-seater sedan. The front suspension uses a double-ball-joint MacPherson strut, and the rear suspension uses a multi-link independent suspension.
18
2
Share

What is an SCR fault?

SCR refers to a fault in the Selective Catalytic Reduction system. Below are the relevant details: 1. Detail one: SCR stands for Selective Catalytic Reduction system, which functions similarly to the three-way catalyst in gasoline vehicles. It utilizes catalysts within the conventional muffler while also requiring a urea supply system and injection control system. 2. Detail two: The primary causes of such faults include sensor damage, loose or short-circuited sensor connectors, and related wiring harness issues. Occasionally, mismatched electrical parameters between the level/temperature sensor and the OEM specifications can lead to abnormal level or temperature readings, or even trigger sensor fault warnings.
14
5
Share

How to Turn on High Beam with Manual Transmission?

On the lever located below the steering wheel's left side, lifting it up activates the high beam flash, while pressing it down turns on the sustained high beam. Here are some manual transmission shifting techniques: 1. Shift gears according to vehicle speed: Generally, start in first gear, then shift to second after moving a few meters; shift to third when speed reaches above 20 mph but below 35 mph; shift to fourth between 35-45 mph; and engage fifth gear above 45 mph. 2. Coordinate clutch and throttle properly: Fully depress the clutch while simultaneously releasing the accelerator pedal, then quickly shift to the appropriate gear. Release the gear lever immediately after shifting - prolonged contact may damage the transmission lever (commonly called gear stick).
14
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.