Where to Apply for a Replacement Driver's License?

2 Answers
MaryMarie
07/29/25 8:42am
Replacement driver's licenses are processed at the vehicle management office in the registration location. Below are the required documents and precautions for applying for a replacement driver's license. Documents required for a replacement driver's license: The original and a copy of the motor vehicle driver's identity proof, the original driver's license (if the license is damaged)/a written statement of loss for the driver's license (if the license is lost), and a photo collection receipt. Non-local residents, in addition to the above three documents, also need to prepare the original and a copy of their residence permit. Precautions for replacing a driver's license: After the replacement application is successfully processed, you cannot drive a motor vehicle with the original license before receiving the new one. You can also apply for a replacement driver's license even if there are unprocessed traffic violations.
Was this review help?
8
2
Share
GabriellaAnn
08/11/25 6:16pm
Last time I lost my driver's license and was really anxious. I asked an experienced driver friend and learned that I needed to go to the local DMV to get a replacement. You need to bring your original ID card and fill out a lost declaration form. The on-site photo fee is about 50 yuan. It's best to check the DMV's address and business hours online in advance to avoid a wasted trip. I chose an off-peak time to go and got it done in half an hour. Don't forget, driving without a license can result in a fine of several hundred yuan if you're checked, so I recommend everyone take a photo of their driver's license and save it on their phone as a backup. After replacement, the new license's validity period remains unchanged, which is quite convenient.
Was this review help?
15
3
Share
Expand All
More Forum Discussions

How to Reset Tire Pressure in Tesla?

Tesla tire pressure warning reset method is as follows: 1. Turn the ignition switch to the second gear, and the instrument will display the total mileage/trip mileage interface. 2. Press the "OK" button on the left side of the steering wheel, then press the right button to enter the "Maintenance" interface. 3. Press the down arrow button on the steering wheel to enter the "Tire Pressure" interface. 4. The instrument will prompt "Run-Flat Indicator Active", press the "OK" button on the steering wheel to confirm. 5. The instrument will prompt "Is the tire pressure normal?", use the down arrow button on the steering wheel to select "Yes" and press "OK" to confirm. 6. Complete the tire pressure reset operation. After turning off and restarting the vehicle, the tire pressure reset is successful. Notes: 1. After replacing tires or wheel rotation, there is no need to reset the TPMS sensors. 2. Do not attempt to clear the tire pressure warning by resetting the TPMS sensors. When resetting the tire pressure sensors: 1. Inflate all tires to their recommended pressure, as shown on the tire and loading information label on the front passenger side door pillar. 2. Drive for ten minutes as preparation, then on the Model-S touchscreen, click Controls > Settings > Vehicle > Tire Pressure Monitoring > Reset Sensors. 3. Follow the on-screen instructions.
16
2
Share

What does the ON position mean?

The ON position in a car means that when the car is adjusted to this gear, it provides power support to all electronic devices in the car. Simply put, the electrical appliances in the car are connected to the battery through this function, allowing the devices to operate normally. Below are the usage methods for other gears in a car: P gear method: P gear is the parking gear. When you need to park for a long time, you should shift into this gear. At this time, the mechanical structure inside the transmission will be locked, preventing the vehicle from moving. If you need to leave the vehicle or park on a slope, you should also pull up the handbrake. R gear method: R gear is the reverse gear, which is the same as the R gear in manual transmission models. When shifting into this gear, the vehicle will move backward, and it is used when you need to reverse. N gear method: N gear is the neutral gear, which is the same as the N gear in manual transmission models. In neutral state, the input and output shafts in the transmission are not engaged, and no power is transmitted. When shifting into neutral, you must press the brake or pull up the handbrake to prevent the vehicle from moving. D gear method: D gear is the drive gear, used when the vehicle needs to move forward. In this gear, the transmission operates in standard full automatic shifting mode, and you only need to operate the accelerator pedal according to actual needs.
9
1
Share

What does it mean when a driver's license shows zero points?

Normally, a driver's license displays 0 points. If the license is used to handle vehicle violations, corresponding points will be recorded. If the vehicle has multiple violations, the points on the driver's license will accumulate. A cumulative score of 0 indicates that no points have been deducted yet. According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," the relevant provisions on point deductions are as follows: 1. If a motor vehicle driver accumulates 12 points within a scoring cycle, the traffic management department of the public security authority shall confiscate their motor vehicle driver's license. The driver must, within 15 days, attend a seven-day study session on road traffic safety laws, regulations, and related knowledge at the traffic management department where the license was issued or where the violation occurred. After completing the study session, the vehicle management office must administer an exam on road traffic safety laws, regulations, and related knowledge within 20 days. If the driver passes the exam, the points will be cleared, and the driver's license will be returned. If the driver fails the exam, they must continue studying and retake the exam. If the driver refuses to participate in the study session or take the exam, the traffic management department will announce the suspension of their driver's license. 2. If a motor vehicle driver accumulates 12 points or more twice within a scoring cycle or accumulates 24 points or more, the vehicle management office must also administer a road driving skills test within 10 days after the driver passes the exam on road traffic safety laws, regulations, and related knowledge. If the driver takes the road driving skills test, it will be conducted according to the highest permitted vehicle type specified on their driver's license.
9
5
Share

What is the original tire brand of Haval H5?

Haval H5's original tire brand is Hankook. The functions of tires are: 1. To transmit driving force, braking force, and steering force to achieve vehicle operation; 2. To support vehicle loads; 3. To reduce and absorb vibrations and impact forces during driving, avoiding severe vibrations that may damage vehicle components. Taking the 2018 Haval H5 as an example, it belongs to the compact SUV category, with a front track of 1522mm, rear track of 1530mm, a fuel tank capacity of 70 liters, and a curb weight of 1740kg. The 2018 Haval H5 features a double-wishbone independent front suspension and a five-link non-independent rear suspension. It is equipped with a 2.0L turbocharged engine, delivering a maximum horsepower of 190PS, maximum power of 140kW, and maximum torque of 250Nm, paired with a 6-speed manual transmission.
4
4
Share

What is the method for replacing the battery in a Tiida car key?

To replace the battery in a Tiida car key: Use a tool to open the key casing from the side seam, remove the old battery, and replace it with a new one. Taking the 2021 Tiida as an example, it is a compact car with body dimensions of 4393mm in length, 1766mm in width, and 1539mm in height, with a wheelbase of 2700mm and a curb weight of 1180kg. The 2021 Tiida is equipped with a 1.6L naturally aspirated engine, delivering a maximum horsepower of 122PS, a maximum torque of 155Nm, and a maximum power of 96kW, paired with a 5-speed manual transmission.
11
5
Share

Where is the engine number of Kia K3 located?

The engine number of Kia K3 is located below the throttle body, and it can be seen after removing the intake hose. Taking the 2021 Kia K3 as an example, it is a compact car with body dimensions of: length 4660mm, width 1780mm, height 1450mm, wheelbase of 2700mm, and a body weight of 1265kg. The 2021 Kia K3 features a MacPherson independent front suspension and a torsion beam non-independent rear suspension. It is equipped with a 1.4T turbocharged engine, delivering a maximum horsepower of 130PS, maximum torque of 211Nm, and maximum power of 96kW, paired with a 7-speed dual-clutch transmission.
8
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.