Where to Apply for a Motorcycle License in Chengdu?

1 Answers
CharlotteRose
07/30/25 8:48am
Chengdu residents or temporary residents can apply for a motorcycle license at the vehicle management office of the local public security traffic management department. Here is some relevant information about obtaining a motorcycle license: 1. Required materials: Generally, you can apply for a motorcycle license at a driving school approved by the traffic police department. You will need to pay a certain registration fee and prepare 8 white-background photos and a 10-yuan physical examination fee. For non-local residents, a local residence certificate is also required. If you are adding a license, you must provide the original driver's license. The fees and examination process for first-time applicants and those adding a license are the same. After registration, a physical examination is required, which mainly includes tests for color blindness, physical disabilities, and vision. 2. Examination content: The test consists of four parts: Subjects 1, 2, 3, and 4. Subjects 1 and 4 are theoretical tests, assessing common knowledge and emergency response abilities. Subjects 2 and 3 are road tests. Subject 2 involves slalom around four poles arranged in a straight line, requiring an S-shaped path around the poles and back, without touching the ground, stalling the vehicle, or crossing the lines. Subject 4 requires driving as instructed by the examiner.
Was this review help?
10
0
Share
More Forum Discussions

Can spark plugs that are 2mm longer than the original ones be used?

Spark plugs that are 2mm longer than the original ones cannot be used because the model does not match, and the discharge gap is different, which will cause problems such as car shaking, difficulty in acceleration, and increased fuel consumption. Steps for replacing spark plugs: Open the hood, lift the plastic cover of the engine, remove the high-voltage distributor wires, and mark the position of each cylinder to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. When removing them, check for any leaves, dust, etc., on the outside and make sure to clean them thoroughly. Place the new spark plug into the spark plug hole, hand-tighten it a few turns, and then use the socket to tighten it. Install the removed high-voltage distributor wires according to the ignition sequence, and then snap the cover back on. If the spark plug is damaged, it can directly cause many problems such as leakage in the vehicle's ignition system, increased fuel consumption, and reduced power. The most significant issue is difficulty in ignition, which affects the normal use of the vehicle. Severe erosion of the spark plug, such as scarring at the top, damage, or melted and eroded electrodes, indicates that the spark plug is damaged and should be replaced.
18
5
Share

How Long Does It Take to Get the Results of a Driver's Safe Driving Record?

There is a process from the occurrence of a traffic violation to its entry into the online system for a motor vehicle's safe driving record or violation record. This involves data collection, organization, review, entry, and transmission, which takes a certain amount of time. However, the timeframe is not uniform nationwide and depends on the update speed of the local traffic management department. Generally, it takes within a week or longer. The "Procedures for Handling Road Traffic Violations" are introduced as follows: 1. Article 19: Within five days after traffic monitoring equipment collects violation records, the traffic management department of the public security organ at the place where the violation occurred shall review the recorded content. After verification, the information shall be entered into the road traffic violation information management system as evidence for penalizing the violation. 2. Article 20: On the day the violation information recorded by traffic monitoring equipment is entered into the road traffic violation information management system, the traffic management departments of the public security organs at the place where the violation occurred and the place where the motor vehicle is registered shall make the information available to the public for inquiry. Within five days after the violation information is entered into the system, the traffic management department at the place where the violation occurred shall notify the violator or the owner/manager of the motor vehicle of the time, location, and facts of the violation via mobile internet applications, text messages, or mail, based on the contact information in the motor vehicle's registration records, and inform them to address the matter within 30 days.
2
5
Share

Does the Magotan 330 Luxury have a particulate filter?

The Magotan 330 Luxury meets the China VI emission standard. It does not have a particulate filter. A particulate filter is a ceramic filter installed in the exhaust system of diesel engines, which captures particulate emissions before they enter the atmosphere. It can reduce soot produced by diesel engines by more than 90%, and the captured particulate emissions are subsequently burned off during vehicle operation. Working principle of the particulate filter: The diesel particulate filter is coated with metals such as platinum, rhodium, and palladium. The black smoke containing carbon particles emitted by the diesel engine enters the exhaust particulate trap through a dedicated pipeline. Inside, a densely arranged bag-type filter captures the carbon particles on a filter made of metal fiber felt. When the accumulation of particles reaches a certain level, the burner at the end automatically ignites, burning off the captured carbon particles and converting them into harmless carbon dioxide. To check if the Magotan 330 Luxury has a particulate filter, you can use the following three methods: Check the and to see if there is a particulate filter function. Additionally, carefully review the fault codes in the manual to see if there is a "particulate filter" warning light indicator. Check the label on the oil cap. If the oil cap clearly indicates the use of 0W-20 grade oil, it means the vehicle is equipped with a particulate filter. Look behind the three-way catalytic converter on the exhaust pipe for an additional cylindrical section. If present, that is the particulate filter.
2
0
Share

What Causes the Engine Warning Light to Illuminate in the New 3 Series?

The BMW 3 Series engine warning light may illuminate due to the following 7 main reasons: Sensor malfunction: This includes sensors such as coolant temperature, crankshaft position, air flow, intake temperature, and oxygen sensors. When these sensors are damaged, have poor contact, or experience signal interruption, the vehicle's ECU cannot accurately obtain engine data, triggering the engine warning light. Fuel/oil quality issues: Failure to use the fuel or engine oil as specified by the manufacturer may cause engine wear, leading to the warning light activation. Poor fuel mixture combustion: Incomplete combustion can result in engine carbon buildup or knocking. When detected by the oxygen sensor and reported to the ECU, the warning light will illuminate as an alert. Causes include spark plug failure, ignition coil malfunction, fuel pump issues, or clogged fuel lines. Turbocharging problems: Issues with the intake boost piping or turbocharger can trigger the engine light. The most common is turbocharger damage, often accompanied by oil leaks, excessive oil consumption, power loss, metallic noises, or blue/black exhaust smoke. Intake system issues: Air intake problems may cause engine pipe blockages, potentially triggering the warning light. A dirty air filter that hasn't been regularly cleaned can lead to intake complications. Exhaust system faults: Exhaust problems can also activate the engine light. Common causes include rear oxygen sensor failure, catalytic converter issues, or exhaust camshaft and bearing faults. Leaded gasoline, improper lubricant additives, physical damage to the catalytic converter, or fuel system malfunctions may damage the catalytic converter. Anti-theft system malfunction: If the electronic anti-theft system fails or the anti-theft controller doesn't match the engine ECU, the system may prevent normal engine operation while illuminating the warning light. When the engine warning light illuminates, follow these steps: First, check if the engine operates normally. If there's noticeable shaking, black smoke emission, or similar issues, avoid restarting the engine. Note: Never restart if the red warning light is on. If the engine can start, turn it off and wait 5-10 minutes. Without pressing the brake pedal, press the start button once or turn the key halfway to the 'ON' position (without depressing the clutch). The vehicle will initiate a self-check upon power-up. Observe whether the warning light turns off after 5-10 seconds. If the light persists, visit a service center promptly. Technicians can use diagnostic tools to retrieve trouble codes, identify the specific issue, and perform targeted repairs.
8
3
Share

Will driving straight in a left-turn lane be captured by cameras?

Driving straight from a left-turn lane will be captured by cameras, and the probability of being caught is very high. If you drive straight when both the left-turn and straight signals are green, the chance of being caught is relatively low, but if captured, you will be penalized for not driving in the designated direction, resulting in a fine and a deduction of 2 points. If you drive straight when the straight signal is green but the left-turn signal is red, the probability of being caught is very high, and it is usually treated as running a red light, leading to a fine and a deduction of 6 points. Below are some common traffic violations: 1. Running a red light: This is the most common traffic violation. Since the new traffic regulations were introduced, running a red light results in an immediate deduction of 6 points. 2. Driving without a license: If a driver continues to drive while their license is suspended, they will be fined and detained for 15 days. Those driving without a license or with a revoked license will also be detained for 15 days and fined. 3. Overloading or overcrowding: For passenger vehicles exceeding the rated capacity by less than 20% or freight vehicles exceeding the rated load by less than 30%, a fine will be imposed. If the excess is 20% or more for passenger vehicles or 30% or more for freight vehicles, a heavier fine will be imposed. 4. Drunk driving: Driving under the influence of alcohol will result in a 3-month suspension of the driver's license and a fine. Driving a commercial vehicle under the influence will also lead to a 3-month suspension and a fine. 5. Speeding: If a vehicle exceeds the speed limit by 50% or more, the driver will face a fine and revocation of their driver's license.
3
1
Share

What is the engine code for the BMW M3's V8?

The engine code for the BMW M3's V8 is S65B40. This engine was transplanted from the BMW M5 and is the first V8 engine in the history of the BMW M3. The S65B40 engine incorporates F1 racing engine technology and features BMW's Double VANOS and Valvetronic technologies. The BMW M3's design continues BMW's signature sharp lines and muscular appearance, fully showcasing the personalized style of the BMW 3 Series. The elongated hood, dynamic long wheelbase, noticeably rear-set cabin, and short front overhang clearly demonstrate the BMW 3 Series Coupe's more sporty inclination compared to the standard 3 Series.
4
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.